An adaptive switching control approach for trajectory tracking of robotic manipulators

In order to design a suitable controller which can achieve accurate trajectory tracking and a good control performance, and guarantee the stability and robustness of a robot system due to external disturbances error and internal parameter variations, an adaptive switching control strategy is proposed. The proposed scheme is designed under the condition of bounded distances and consists of an adaptive switching law and a PD controller. Based on the Lyapunov stability theory, it is proved that the proposed scheme can guarantee the tracking performance of the robotic manipulator and is adapted to varying unknown loads. Simulations are carded out on a two-link robotic manipulator, which illustrate the feasibility and validity of the proposed control scheme and the robustness for variational payloads.

The Techniques to Reduce Variations within One Plate

Conventional techniques to control variations within one plate have been based on preset models and constant automatic position control (APC or pressure feedback automatic gauge control(PAGC).However.because of the rolling force prediction error in the preset models and of the inadequate response speed of dynamic system and of the eccentricity, etc.,the conventional method has not given satisfactory results, the statistics'variations within one plate are in range of 0.25-0.60 mm The authors have developed the techniques to control the variations, which are dynamic intelligent control of hydraulic screwdown system. synchronism control of hydraulic screwdown, eccentricity control method by rotary encoder and the curve of modulus of mill measured automatically, etc., The techniques were fully and successfully industrialized in The Plate Mill of Maanshan Iron and Steel Company and good results that variations are in range of 0.08-0.15min hare been obtained in that mill.

INTEGRATION OF GENERIC SHOP FLOOR CONTROL

Based on the discussion of functions, components, control structure and network computing architecture of generic shop floor control (GSFC) in computer integrated manufacturing system (CIMS), the internal integration between components of GSFC and the external integration between GSFC and the other components of CIMS are studied. The integration models on the aspects of function, information, processing and interface are put forward. The integration models and the methods are implemented and applied in CIMS projects successfully.

BIO-INSPIRED SELF-ADAPTIVE MANUFACTURING SYSTEM CONTROL ARCHITECTURE

Future manufacturing systems need to cope with frequent changes and disturbances, therefore their control architectures require constant adaptability, agility, stability, self-organization, intelligence, and robustness. Bio-inspired manufacturing system can well satisfy these requirements. For this purpose, by referencing the biological organization structure and the mechanism, a bio-inspired manufacturing cell is presented from a novel view, and then a bio-inspired self-adaptive manufacturing model is established based on the ultra-short feedback mechanism of the neuro-endocrine system. A hio-inspired self-adaptive manufacturing system coordinated model is also established based on the neuro-endocrine-immunity system （NEIS）. Finally, an example based on pheromone communication mechanism indicates that the robustness of the whole manufacturing system is improved by bio-inspired technologies.

Adaptive PID control system for an autonomous underwater vehicle

The control system of an autonomous underwater vehicle （AUV） is introduced. According to control requirements of the AUV, a simple but practical adaptive PID control method is designed The semi-physical simulation is done to test the feasibility of the control system. The neural network idea and the structure of PID controller are referred to design the adaptive PID controller. An intelligent integral is introduced to improve control precision. Compaed with traditional PID con- trollers, the adaptive PID controller has simple structure, good online adjusting ability, fast convergence and good robustness. The simulation experiments also show that the adaptive PID control system has high precision and fine antijamming ability.

An Experimental Study on Microcomputer Control of Pump Controlled Motor Systems

Pump controlled motor electrohydraulic servo systems are much used in circumstances where high power drive is needed. This kind of system has the advantage of energy-saving. But, it also has some defects that have to be improved. Microcomputer control of a pump controlled motor electrohydraulic servo system is studied. A PID controller is first adopted on the closed loop control system, and experimental results are obtained. Then, a model reference adaptive controller is designed and realised on the same system applying a single board microcomputer. Experimental results show that the dynamic properties of the adaptive control system is much better than those of the PID system under different inertia load conditions.

Robust Continuous-time Generalized Predictive Control for Large Time-delay System

A simple delay-predictive continuous-time generalized predictive controller with filter (F-SDCGPC) is proposed. By using modified predictive output signal and cost function, the delay compensator is incorporated in the control law with observer structure, and a filter is added for enhancing robustness. The design of filter does not affect the nominal set-point response, and it is more flexible than the design of observer polynomial. The analysis and simulation results show that the F-SDCGPC has better robustness than the observer structure without filter when large time-delay error is considered.

Application of clutch to clutch gear shift technology for a new automatic transmission

For the purpose of engineering development for a new 8-step speed automatic transmission,a simplified dynamic model for this gearbox was established and key parameters which affected the shift quality were analyzed.Aiming at four different shift types,the ideal characteristics of shift clutch and engine control were set up.By using torque estimation method,PI slip control algorithm and engine coordinated control principle,the control model and transmission controller were well developed for three shift phases which included rapid-fill phase,torque phase and inertia phase.The testing environment on the rig and prototype vehicle level was built and the testing results obtained in ultimate condition could verify the accuracy and feasibility of this shift control strategy.The peak jerk during shift process was controlled within ±2 g/s where the smooth gearshift was obtained.The development proposal and algorithm have a high value for engineering application.

Linear and nonlinear control of a robotic excavator

Various control systems for a robotic excavator named LUCIE (Lancaster University Computerized and Intelligent Excavator),were investigated. The excavator is being developed to dig trenches autonomously. One stumbling block is the achievement of adequate,accurate,quick and smooth movement under automatic control. Here,both classical and modern approaches are considered,including proportional-integral-derivative (PID) control tuned by conventional Zigler-Nichols rules,linear proportional-integral-plus (PIP) control,and a novel nonlinear PIP controller based on a state-dependent parameter (SDP) model structure,in which the parameters are functionally dependent on other variables in the system. Implementation results for the excavator joint arms control demonstrate that SDP-PIP controller provides the improved performance with fast,smooth and accurate response in comparison with both PID and linearized PIP control.

S^2 BHCA-Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill & simulation based hybrid control architecture (S2BHCA) as the controller's design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S2 BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the "skill". The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three "skills" for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S2 BHCA.

New development of longwall mining equipment based on automation and intelligent technology for thin seam coal

The paper introduced complete sets of automatic equipment and technology used in thin seam coal face, and proposed the comprehensive mechanization and automation of safe and high efficiency mining models based on the thin seam drum shearer. The key technology of short length and high power thin seam drum shearer, and new type roof support with big extension ratio and plate canopy were introduced. The new research achievement on automatic control system of complete sets of equipment for the thin seam coal, which composed of electronic-hydraulic system, compact thin seam roof supports, high effective shearer with intelligent control system, and characterized by automatical follow-up and remote control technology, was described in this paper..

Hydraulic cylinder control of injection molding machine based on differential evolution fractional order PID

Injection molding machine,hydraulic elevator,speed actuators belong to variable speed pump control cylinder system.Because variable speed pump control cylinder system is a nonlinear hydraulic system,it has some problems such as response lag and poor steady-state accuracy.To solve these problems,for the hydraulic cylinder of injection molding machine driven by the servo motor,a fractional order proportion-integration-diferentiation(FOPID)control strategy is proposed to realize the speed tracking control.Combined with the adaptive differential evolution algorithm,FOPID control strategy is used to determine the parameters of controller on line based on the test on the servo-motor-driven gear-pump-controlled hydraulic cylinder injection molding machine.Then the slef-adaptive differential evolution fractional order PID controller(SADE-FOPID)model of variable speed pump-controlled hydraulic cylinder is established in the test system with simulated loading.The simulation results show that compared with the classical PID control,the FOPID has better steady-state accuracy and fast response when the control parameters are optimized by the adaptive differential evolution algorithm.Experimental results show that SADE-FOPID control strategy is effective and feasible,and has good anti-load disturbance performance.

Adaptive synchronization of a class of chaotic systems via variable structure control

The synchronization problem under two cases is considered. One is that the bound on the uncertainty existing in the controller is known, the other is that the bound is unknown. In the latter case, the simple adaptation laws for upper bound on the norm of the uncertainty is proposed. Using this adaptive upper bound, a variable structure control is designed. The proposed method does not guarantee the convergence of the adaptive upper bound to the real one but makes the system asymptotically stable.

Research on control technology of elderly-assistant & walking-assistant robot based on tactile-slip sensation

In this paper,according to the old people's physical characteristics and their technical requirements for comfort and mastery when operating the robot,a control approach driven by tactile and slip senses is investigated to control the elderly-assistant & walking-assistant robot. First,on the basis of the proposed driving control system program of tactile and slip,a detection system of tactile and slip senses are designed. Based on the tactile and slip feature representation and extraction,an improved classification and recognition method is proposed which combines K-nearest neighbor (KNN) algorithm and K-means algorithm. And then,a robot control system based on TMS320F2812 is designed in this paper,including its hardware and software design. Then,a moving control method including the fuzzy adaptive control algorithm is presented for the walking-assistant robot to realize some different moving properties. At last,by the experimental verification in the walking-assistant robot,the research results show that the tactile and slip senses detection and recognition method is effective,and the whole control system has good feasibility and adaptability.

Cardiac Neurons Firing Preceding Cortical Neurons Firing by Variable Time Equivalent to RP before Conscious Act

The signals and the neuronal mechanisms that underlying the behavior, actions, and action-directed goals in man and animals during conscious state are not fully understood, and the neuro-dynamic mechanisms and the source of these neuronal signals are not authenticated. Temporal judgment alone can neither account for neural signaling necessary for emergence of conscious act nor explain RP （Readiness Potential, the accepted neural correlate time needed for the neurons to fire） that precedes the onset of action or the latency time of 0.5 ms that precedes the conscious act found by Libet. Neuronal feedback mechanisms between the heart and the brain seem feasible and logical suggestions to be considered, so clearly, I would suggest that the onset of a conscious-directed goal, conscious action, freewill, intension, and the neural signals and mechanisms that control them may depend upon the interaction between two sources： （1） the brain and （2） the heart. The temporal-cardiac （neural system） interaction has been well established in heart-brain interaction studies by many workers who found that the work of the heart precedes that of the brain in EEG （electroencephalography） findings in conscious stimulation, which may explain and account for RP time and the 0.5 ms latency period of Libet＇s important findings. According to my hypothesis （AlFaki 2009） and views, the temporal neurons in the soma to-sensory cortex will respond to conscious stimulation only after receiving neuronal signals from the cardiac neurons in the neural plexus of the heart; after variable millisecond equivalent to RP or Libet＇s latency period prior to temporal neuronal firinging in response to conscious act, this time is the time needed by cardiac neurons to process and signal information to the brain through feedback mechanism and heart-brain interaction.

H_∞ Robust Fault-Tolerant Controller Design for an Autonomous Underwater Vehicle’s Navigation Control System

In order to improve the security and reliability for autonomous underwater vehicle （AUV） navigation, an H∞ robust fault-tolerant controller was designed after analyzing variations in state-feedback gain Operating conditions and the design method were then analyzed so that the control problem could be expressed as a mathematical optimization problem. This permitted the use of linear matrix inequalities （LMI） to solve for the Hv controller for the system. When considering different actuator failures, these conditions were then also mathematically expressed, allowing the H∞ robust controller to solve for these events and thus be fault-tolerant. Finally, simulation results showed that the H∞ robust fault-tolerant controller could provide precise AUV navigation control with strong robustness.

Automatic Control System for Magnetic Separators Based on PLC

To make magnetic separator more excellent in beneficiation, an advanced automatic control system for magnetic separator was designed. This paper designs automatic control system for magnetic separators, combination with PLC and technology of vary frequency. This system can wholly supervise and control the parameters of work course of magnetic separators.

Information Organization and Visualization Mechanism of Electronic Map

Based on research on information organization and visualization mechanism of multimedia electronic map, this paper proposes an organization method about spatial information and multimedia information of multimedia electronic map: seamless spatial data were organized and managed by stratified expansion R-tree and Quad-tree hierarchy; and multimedia information data were organized and managed by hypermedia model based on an electronic map. Considering electronic map features, the paper also proposes a method for spatial date organization, which integrates Digital Landscape Model and Digital Cartographic Model, and a hybrid model between vector and raster spatial data. Then, the paper studies information visualization mechanism of multimedia electronic map. Finally, the paper certifies the results via a case of multimedia electronic map authoring tools software—Atlas2005.

An Institutional Analysis of the Multi-layered Characteristics of Social Organizations in China

The actual state of affairs of Chinese social organizations and the latest theoretical findings on the subject indicate that independence and autonomy are concepts that are interrelated but not fundamentally interchangeable; their actual organizational relationship is complex and varied. Exploration of the relationship between the two concepts is a necessary step in the construction and improvement of a rule-based interpretation of the characteristics of Chinese social organizations. Combining resource dependence theory with the institutional logics perspective enables us to analyze the multiple mechanisms influencing the relationship between independence and autonomy at the organizational level and to test for these mechanisms using a mixed methods research design. Our empirical findings indicate that social organizations gain greater autonomy when they have greater independence from government resources and when they strongly identify, structurally and behaviorally, with classical third sector theory. Organizations＇ behavioral identification can regulate the relationship between independence and autonomy. Further case studies support the value of the above findings. This shows that other mechanisms can often replace, offset or constrain the effects of resource dependence. In the real world, no single fixed theory can cover the independence-autonomy relationship.