As a miniaturized direct injection(DI)solution,a self-pressurized injector is of great significance for small aviation piston engines,such as spark-ignited two-stroke heavy-fuel engines.The spray characteristics of DI...As a miniaturized direct injection(DI)solution,a self-pressurized injector is of great significance for small aviation piston engines,such as spark-ignited two-stroke heavy-fuel engines.The spray characteristics of DI injectors are an important application prerequisite.In this paper,the computational fluid dynamics(CFD)software AVL Fire is employed to study the spray characteristics.Two types of spray models are established based on the Han Sheet model and the KH-RT model,and simulation works are carried out according to two types of spray tests in the literature.The comparison results show that in the constant volume bomb test,the spray patterns obtained by simulation under the two sets of environmental pressures are similar to those in the experiment,and the simulation spray using the KH-RT model can fit the spray contraction of the near nozzle field and the vortex of the far nozzle field better.In the tube test,the spray patterns obtained by simulation under the five sets of flow velocity are similar to those in the experiment,and the simulation spray using the KH-RT model can fit the spray expansion and the vortex of the far nozzle field better.The RP-3 kerosene spray characteristics of the self-pressurized injector are also experimentally studied,and the results demonstrate that due to the higher viscosity of kerosene,the spray shrinks more easily,resulting in a smaller spray cone angle and larger penetration.Therefore,changes in environmental pressure have greater impact on the kerosene spray pattern.展开更多
ln this research, the whole contact-type large-scale sow house with fer-mentation bed was designed. The planning area of the entire piggery was 5 700 m2 with workplace and green belts. The sow house was 93 m long and ...ln this research, the whole contact-type large-scale sow house with fer-mentation bed was designed. The planning area of the entire piggery was 5 700 m2 with workplace and green belts. The sow house was 93 m long and 33 m wide, a total of 3 069 m2, including office area of 60 m2 and aisle area of 107 m2. The fer-mentation bed had an area of 2 902 m2 with length of 88.7 m and width of 27.7 m. lts area accounted for 95% of the total area of sow house. The fermentation mattress had a depth of 80 cm, and had a volume of 2 321 m3, equivalent to 733 t of coconut chaff and rice chaff. On a large fermentation bed, the areas for boars, replacement gilts, pregnant sows, obstetric tables, nursery pigs, etc. were designed. The large-scale sow house with fermentation bed was equipped with the automatic feeding system, automatic sprinkler system, automatic positioning column for preg-nant sows, sows＇ obstetric table system, fanning wet curtain cooling system, video monitoring system, environmental monitoring （light, temperature, water, humidity, CO2, NH3） and automatic control system. Every farming area was equipped with feeding trough and water trough. The water though was fixed with overflow pipe for removing the extra water. The house could hold 500-head sows. Each sow occu-pied 4.9 m2 of the fermentation bed in average. The designed sow house had a maximum annual output of 10 000 piglets.展开更多
基金supported by the National Natural Science Foundation of China(No.51865031)the State Key Laboratory of Engines of Tianjin University(No.K2020-05)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(No.20KJB470014)。
文摘As a miniaturized direct injection(DI)solution,a self-pressurized injector is of great significance for small aviation piston engines,such as spark-ignited two-stroke heavy-fuel engines.The spray characteristics of DI injectors are an important application prerequisite.In this paper,the computational fluid dynamics(CFD)software AVL Fire is employed to study the spray characteristics.Two types of spray models are established based on the Han Sheet model and the KH-RT model,and simulation works are carried out according to two types of spray tests in the literature.The comparison results show that in the constant volume bomb test,the spray patterns obtained by simulation under the two sets of environmental pressures are similar to those in the experiment,and the simulation spray using the KH-RT model can fit the spray contraction of the near nozzle field and the vortex of the far nozzle field better.In the tube test,the spray patterns obtained by simulation under the five sets of flow velocity are similar to those in the experiment,and the simulation spray using the KH-RT model can fit the spray expansion and the vortex of the far nozzle field better.The RP-3 kerosene spray characteristics of the self-pressurized injector are also experimentally studied,and the results demonstrate that due to the higher viscosity of kerosene,the spray shrinks more easily,resulting in a smaller spray cone angle and larger penetration.Therefore,changes in environmental pressure have greater impact on the kerosene spray pattern.
基金Supported by Chinese Ministry of Science and Technology(2012DFA31120)Natural Science Foundation of China(NSFC)(31370059)+2 种基金948 Project of Chinese Ministry of Agriculture(2011-G25)973 Program Earlier Research Project(2011CB111607)Project of Agriculture Science and Technology Achievement Transformation(2010GB2C400220)
文摘ln this research, the whole contact-type large-scale sow house with fer-mentation bed was designed. The planning area of the entire piggery was 5 700 m2 with workplace and green belts. The sow house was 93 m long and 33 m wide, a total of 3 069 m2, including office area of 60 m2 and aisle area of 107 m2. The fer-mentation bed had an area of 2 902 m2 with length of 88.7 m and width of 27.7 m. lts area accounted for 95% of the total area of sow house. The fermentation mattress had a depth of 80 cm, and had a volume of 2 321 m3, equivalent to 733 t of coconut chaff and rice chaff. On a large fermentation bed, the areas for boars, replacement gilts, pregnant sows, obstetric tables, nursery pigs, etc. were designed. The large-scale sow house with fermentation bed was equipped with the automatic feeding system, automatic sprinkler system, automatic positioning column for preg-nant sows, sows＇ obstetric table system, fanning wet curtain cooling system, video monitoring system, environmental monitoring （light, temperature, water, humidity, CO2, NH3） and automatic control system. Every farming area was equipped with feeding trough and water trough. The water though was fixed with overflow pipe for removing the extra water. The house could hold 500-head sows. Each sow occu-pied 4.9 m2 of the fermentation bed in average. The designed sow house had a maximum annual output of 10 000 piglets.
