Recently,there has been a huge increase in the usage of fuel resources for automobiles which is severely affecting the climate and causing global warming.The use of electric vehicle(EV)is an effective way to protect t...Recently,there has been a huge increase in the usage of fuel resources for automobiles which is severely affecting the climate and causing global warming.The use of electric vehicle(EV)is an effective way to protect the environment and reduce travel costs.However,the EV charging system has a single charging source,and the charging rate is limited.In this paper,an EV wireless charging system based on dual source power supply has been developed.It realizes intelligent switching between 12 V photovoltaic output and 220 V AC dual source power,and has wireless transmission function.Based on the proposed power supply architecture,the micro wireless charging model is built,which enables the EV model to store power and realize static and mobile control through the wireless induction charging system.展开更多
Abstract--When the circuits in which electronic products are fitted are disturbed by various interrupting signals, wave distortions occur to the normal voltage signals of these circuits. These wave distortions influen...Abstract--When the circuits in which electronic products are fitted are disturbed by various interrupting signals, wave distortions occur to the normal voltage signals of these circuits. These wave distortions influence the normal operation and life cycle of electronic products. To eliminate the harmful effects of interrupting signals on electronic products, in this paper, a digital filter algorithm based on morphological lifting scheme and median filter （MLS-MF）, which will be used to filter various interrupting signals existing in the circuits in which electronic products are fitted, is proposed. A variety of interrupting sig- nals have been included in simulation studies, and simulation results have demonstrated the effectiveness and feasibility of the proposed digital filter algorithm in high frequency continuous interference, random background noise and damped oscillatory transient interference filter. Index Terms--Digital filter, lifting scheme, median filter, mor- phology.展开更多
It is necessary to develop an automatic fault diagnosis system to avoid a possible nuclear disaster caused by an inaccurate fault diagnosis in the nuclear power plant by the operator. Because Radial Basis Function Neu...It is necessary to develop an automatic fault diagnosis system to avoid a possible nuclear disaster caused by an inaccurate fault diagnosis in the nuclear power plant by the operator. Because Radial Basis Function Neural Network (RBFNN) has the characteristics of optimal approximation and global approximation. The mixed coding of binary system and decimal system is introduced to the structure and parameters of RBFNN, which is trained in course of the genetic optimization. Finally, a fault diagnosis system according to the frequent faults in condensation and feed water system of nuclear power plant is set up. As a result, Genetic-RBF Neural Network (GRBFNN) makes the neural network smaller in size and higher in generalization ability. The diagnosis speed and accuracy are also improved.展开更多
As the service life of the electric bicycle＇ s storage battery is shortened due to the long-term floating charge, an automatic power- off circuit for the storage battery of electric bicycle is designed, and also the ...As the service life of the electric bicycle＇ s storage battery is shortened due to the long-term floating charge, an automatic power- off circuit for the storage battery of electric bicycle is designed, and also the composition and design of the circuit are specifically expounded. After a test, the circuit can achieve a desired effect. Therefore, it can prolong the service life of the electric bicycle＇ s storage battery and save electric energy in the actual applications.展开更多
At present,ZPW-2000 track circuit fault diagnosis is artificially analyzed and monitored.Its discrimination method not only is low efficient and takes a long period,but also requires highly experienced personnel to an...At present,ZPW-2000 track circuit fault diagnosis is artificially analyzed and monitored.Its discrimination method not only is low efficient and takes a long period,but also requires highly experienced personnel to analyze the data.Therefore,we introduce kernel principal component analysis and stacked auto-encoder network(KPCA-SAD)into the fault diagnosis of ZPW-2000 track circuit.According to the working principle and fault characteristics of track circuit,a fault diagnosis model of KPCA-SAE network is established.The relevant parameters of key components recorded in the data collected by field staff are used as the fault feature parameters.The KPCA method is used to reduce the dimension and noise of fault document matrix to avoid information redundancy.The SAE network is trained by the processed fault data.The model parameters are optimized overall by using back propagation(BP)algorithm.The KPCA-SAE model is simulated in Matlab platform and is finally proved to be effective and feasible.Compared with the traditional method of artificially analyzing fault data and other intelligent algorithms,the KPCA-SAE based classifier has higher fault identification accuracy.展开更多
Ferroelectric phase diagrams and the temperature dependence of polarization,dielectric properties of the three pseudo-spin in ferroelectric or ferro-antiferroelectric systemdescribed by a transverse Ising models are i...Ferroelectric phase diagrams and the temperature dependence of polarization,dielectric properties of the three pseudo-spin in ferroelectric or ferro-antiferroelectric systemdescribed by a transverse Ising models are investigated on the basis of the effective-Geld theorywith the differential operator technique. The effects of the transverse field and the couplingstrength between the nearest-neighboring pseudo-spin on the physical properties are discussed indetail.展开更多
Anhua-Xupu fault belt plays a very important role in the formation of Xuefeng Mountains. The fault belt shows an arc-structure extruding towards NW. Fault rocks, microstructures and homogeneous temperature (concentrat...Anhua-Xupu fault belt plays a very important role in the formation of Xuefeng Mountains. The fault belt shows an arc-structure extruding towards NW. Fault rocks, microstructures and homogeneous temperature (concentrated around 160℃) of fluid inclusions in the quartz veins shows that the fault belt mainly underwent shallow brittle deformation and the highest-grade dynamic metamorphic rock is mylonitized sericite phyllite. The ESR (Electron Spin Resonance) dating from the quartz veins in the fault rocks shows that the fault belt underwent two intense fluid movement stages at Yanshanian (156.9~136.2Ma, 119.8~90.6Ma); moreover not only the occurrence and microstructures but also the homogeneous temperature of the quartz veins developed in that two stages show obvious diversity, which can prove that there exists the reversion period of Mesozoic extension and compression movement of Xuefeng mountains between these two stages .展开更多
Core-shell MoSi_(2)@Nb powder was prepared by electrostatic layer self-assembly method.The surfactants SDS(CHSO_(4)Na)and CTAB(C_(19)H_(42)BrN)were used to modify the surface of the two particles to make them charged,...Core-shell MoSi_(2)@Nb powder was prepared by electrostatic layer self-assembly method.The surfactants SDS(CHSO_(4)Na)and CTAB(C_(19)H_(42)BrN)were used to modify the surface of the two particles to make them charged,and the Zeta potential of the suspension was tested by the Zeta potentiometer.Scanning electron microscope,transmission electron microscope and energy dispersive spectrometer were used to characterize the phase,morphology,microstructure and element distribution of synthetic materials.The results show that when the SDS concentration is 2 mmol/L,the CTAB concentration is 3mmol/L and the pH value of Nb suspension is 5,the coating effect is better after secondary cladding.NbSi_(2)phase is found at the interface between Nb and MoSi_(2)after calcination at 200℃ for 2 h in Ar atmosphere,indicating that Nb is highly active and reacts with Si.Core-shell structure is still retained in MoSi_(2)@Nb material after spark plasma sintering at 1450℃ for 2 h under uniaxial pressure of 40 MPa.However,it is found that Nb reacts strongly with MoSi_(2),and most of the Nb phase is reacted.This issue needs to be addressed in subsequent studies.The fracture toughness(K_(IC))of MoSi_(2)@Nb material is significantly improved to 5.75 MPa·m^(0.5)compared with that of MoSi_(2)material(3.32 MPa·m^(0.5)).展开更多
基金supported in part by the National Natural Science Foundation of China(No.62371233)in part by the Aviation Science Foundation Project(Nos.2022Z024052003,20230058052001)。
文摘Recently,there has been a huge increase in the usage of fuel resources for automobiles which is severely affecting the climate and causing global warming.The use of electric vehicle(EV)is an effective way to protect the environment and reduce travel costs.However,the EV charging system has a single charging source,and the charging rate is limited.In this paper,an EV wireless charging system based on dual source power supply has been developed.It realizes intelligent switching between 12 V photovoltaic output and 220 V AC dual source power,and has wireless transmission function.Based on the proposed power supply architecture,the micro wireless charging model is built,which enables the EV model to store power and realize static and mobile control through the wireless induction charging system.
基金supported by the Research Project of Inner Mongolia University of Finance and Economics(KY135)the National Natural Science Foundation of China(61563038)
文摘Abstract--When the circuits in which electronic products are fitted are disturbed by various interrupting signals, wave distortions occur to the normal voltage signals of these circuits. These wave distortions influence the normal operation and life cycle of electronic products. To eliminate the harmful effects of interrupting signals on electronic products, in this paper, a digital filter algorithm based on morphological lifting scheme and median filter （MLS-MF）, which will be used to filter various interrupting signals existing in the circuits in which electronic products are fitted, is proposed. A variety of interrupting sig- nals have been included in simulation studies, and simulation results have demonstrated the effectiveness and feasibility of the proposed digital filter algorithm in high frequency continuous interference, random background noise and damped oscillatory transient interference filter. Index Terms--Digital filter, lifting scheme, median filter, mor- phology.
文摘It is necessary to develop an automatic fault diagnosis system to avoid a possible nuclear disaster caused by an inaccurate fault diagnosis in the nuclear power plant by the operator. Because Radial Basis Function Neural Network (RBFNN) has the characteristics of optimal approximation and global approximation. The mixed coding of binary system and decimal system is introduced to the structure and parameters of RBFNN, which is trained in course of the genetic optimization. Finally, a fault diagnosis system according to the frequent faults in condensation and feed water system of nuclear power plant is set up. As a result, Genetic-RBF Neural Network (GRBFNN) makes the neural network smaller in size and higher in generalization ability. The diagnosis speed and accuracy are also improved.
文摘As the service life of the electric bicycle＇ s storage battery is shortened due to the long-term floating charge, an automatic power- off circuit for the storage battery of electric bicycle is designed, and also the composition and design of the circuit are specifically expounded. After a test, the circuit can achieve a desired effect. Therefore, it can prolong the service life of the electric bicycle＇ s storage battery and save electric energy in the actual applications.
基金National Natural Science Foundation of China(No.61763023)。
文摘At present,ZPW-2000 track circuit fault diagnosis is artificially analyzed and monitored.Its discrimination method not only is low efficient and takes a long period,but also requires highly experienced personnel to analyze the data.Therefore,we introduce kernel principal component analysis and stacked auto-encoder network(KPCA-SAD)into the fault diagnosis of ZPW-2000 track circuit.According to the working principle and fault characteristics of track circuit,a fault diagnosis model of KPCA-SAE network is established.The relevant parameters of key components recorded in the data collected by field staff are used as the fault feature parameters.The KPCA method is used to reduce the dimension and noise of fault document matrix to avoid information redundancy.The SAE network is trained by the processed fault data.The model parameters are optimized overall by using back propagation(BP)algorithm.The KPCA-SAE model is simulated in Matlab platform and is finally proved to be effective and feasible.Compared with the traditional method of artificially analyzing fault data and other intelligent algorithms,the KPCA-SAE based classifier has higher fault identification accuracy.
基金辽宁省自然科学基金，the Hong Kong Polytechnic University through the University Research Grant
文摘Ferroelectric phase diagrams and the temperature dependence of polarization,dielectric properties of the three pseudo-spin in ferroelectric or ferro-antiferroelectric systemdescribed by a transverse Ising models are investigated on the basis of the effective-Geld theorywith the differential operator technique. The effects of the transverse field and the couplingstrength between the nearest-neighboring pseudo-spin on the physical properties are discussed indetail.
基金This study was financially supported by China National Science Foundation Grant No.40334037SINOPEC key project.
文摘Anhua-Xupu fault belt plays a very important role in the formation of Xuefeng Mountains. The fault belt shows an arc-structure extruding towards NW. Fault rocks, microstructures and homogeneous temperature (concentrated around 160℃) of fluid inclusions in the quartz veins shows that the fault belt mainly underwent shallow brittle deformation and the highest-grade dynamic metamorphic rock is mylonitized sericite phyllite. The ESR (Electron Spin Resonance) dating from the quartz veins in the fault rocks shows that the fault belt underwent two intense fluid movement stages at Yanshanian (156.9~136.2Ma, 119.8~90.6Ma); moreover not only the occurrence and microstructures but also the homogeneous temperature of the quartz veins developed in that two stages show obvious diversity, which can prove that there exists the reversion period of Mesozoic extension and compression movement of Xuefeng mountains between these two stages .
基金National Natural Science Foundation of China(51861026)The Graduate Innovation Special Fund of Nanchang Hangkong University(YC2022-011)。
文摘Core-shell MoSi_(2)@Nb powder was prepared by electrostatic layer self-assembly method.The surfactants SDS(CHSO_(4)Na)and CTAB(C_(19)H_(42)BrN)were used to modify the surface of the two particles to make them charged,and the Zeta potential of the suspension was tested by the Zeta potentiometer.Scanning electron microscope,transmission electron microscope and energy dispersive spectrometer were used to characterize the phase,morphology,microstructure and element distribution of synthetic materials.The results show that when the SDS concentration is 2 mmol/L,the CTAB concentration is 3mmol/L and the pH value of Nb suspension is 5,the coating effect is better after secondary cladding.NbSi_(2)phase is found at the interface between Nb and MoSi_(2)after calcination at 200℃ for 2 h in Ar atmosphere,indicating that Nb is highly active and reacts with Si.Core-shell structure is still retained in MoSi_(2)@Nb material after spark plasma sintering at 1450℃ for 2 h under uniaxial pressure of 40 MPa.However,it is found that Nb reacts strongly with MoSi_(2),and most of the Nb phase is reacted.This issue needs to be addressed in subsequent studies.The fracture toughness(K_(IC))of MoSi_(2)@Nb material is significantly improved to 5.75 MPa·m^(0.5)compared with that of MoSi_(2)material(3.32 MPa·m^(0.5)).
