期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
水平轴风力机偏航与俯仰尾流特性 被引量:1
1
作者 田尧 高超 刘亚 《空气动力学学报》 CSCD 北大核心 2023年第11期80-93,I0002,共15页
风力机的尾流干扰效应是影响风场下游风力机性能和风场出力的主要因素,通过调整风轮姿态可有效改善尾流干扰效应,但同时也引入了更为复杂的非定常气动特性和尾流场分布。为了研究风轮姿态控制的尾流特性,基于升力线和自由涡尾迹模型建... 风力机的尾流干扰效应是影响风场下游风力机性能和风场出力的主要因素,通过调整风轮姿态可有效改善尾流干扰效应,但同时也引入了更为复杂的非定常气动特性和尾流场分布。为了研究风轮姿态控制的尾流特性,基于升力线和自由涡尾迹模型建立了水平轴风力机气动和尾流仿真模型,以NREL 5MW风力机为研究对象,在额定风速条件下,研究了叶轮偏航和俯仰工况下的尾流结构特性。在此基础上,对存在风切变和塔架影响时的风力机偏航和俯仰工况产生的尾流干扰进行了分析。研究结果表明:风轮的偏航和俯仰会引起尾流涡结构失稳提前、远尾流区湍流度增大,同时会导致尾流中心发生偏转和尾流作用区域减小,并加快速度亏损恢复,降低尾流效应对下游的干扰。风切变会产生类似风力机俯仰的效果,使得尾流抬升,作用区域减小。塔架对近尾流区的干扰较为显著,而俯仰控制会降低塔架对尾流的干扰。 展开更多
关键词 水平轴风 尾流干扰 线自由涡尾迹模型 偏航/俯仰尾流特性 风切变 塔影效应
下载PDF
基于升力面和大变形梁的风力机叶片气弹模型 被引量:7
2
作者 陈进格 沈昕 +3 位作者 王广 孙翀 竺晓程 杜朝辉 《工程热物理学报》 EI CAS CSCD 北大核心 2018年第7期1469-1475,共7页
为了降低风能度电成本,风力机大型化是风电行业重要的发展趋势,柔性轻质的超长叶片可能出现几何大变形。目前的风力机叶片气弹模型,其结构模型多数基于简单梁模型,对几何非线性因素的考虑较少,或者是基于二阶梁模型,气动模型则多数基于... 为了降低风能度电成本,风力机大型化是风电行业重要的发展趋势,柔性轻质的超长叶片可能出现几何大变形。目前的风力机叶片气弹模型,其结构模型多数基于简单梁模型,对几何非线性因素的考虑较少,或者是基于二阶梁模型,气动模型则多数基于叶素动量理论。为了适应风力机大型化对结构模型和气动模型准确性的要求,本文采用一种大变形几何精确梁理论作为结构模型,完整考虑叶片大变形非线性因素;同时采用自由尾迹升力面方法作为气动模型,更准确地描述三维叶片形状对流场的影响,最终建立一个具有更高准确度的风力机叶片气弹模型。 展开更多
关键词 自由尾迹 几何精确梁 大变形 气弹
原文传递
用于行星大气研究的新型气球
3
作者 I.SteveSmith JamesA.Cutts +1 位作者 郑小石 冉隆华 《科学(中文版)》 2000年第2期34-38,共5页
美国国家航空航天局的科学家和工程师对“老狗学不会新把戏”的陈腐观念不屑一顾,他们正在变革气球——人类最古老的飞行工具——的尺寸、形状、留空时间和耐力,事实上,是有关气球的一切。尽管气球的飞行史已有200多年,并且科学家... 美国国家航空航天局的科学家和工程师对“老狗学不会新把戏”的陈腐观念不屑一顾,他们正在变革气球——人类最古老的飞行工具——的尺寸、形状、留空时间和耐力,事实上,是有关气球的一切。尽管气球的飞行史已有200多年,并且科学家们长期将其用于多种研究使命,但气球的留空时间始终限制着它的作用。如今,多亏大大改进的计算机技术、高技术材料以及先进的设计, 展开更多
关键词 行星大气研究 超长留空气球计划 科学探测气球 自由升力
下载PDF
Free-stream Turbulence Effects on the Boundary Layer of a High-lift Low-Pressure-Turbine Blade
4
作者 Simoni D. Ubaldi M. +1 位作者 Zunino p. Ampellio E. 《Journal of Thermal Science》 SCIE EI CAS CSCD 2016年第3期195-206,共12页
The suction side boundary layer evolution of a high-lift low-pressure turbine cascade has been experimentally in- vestigated at low and high free-stream turbulence intensity conditions. Measurements have been carded o... The suction side boundary layer evolution of a high-lift low-pressure turbine cascade has been experimentally in- vestigated at low and high free-stream turbulence intensity conditions. Measurements have been carded out in order to analyze the boundary layer transition and separation processes at a low Reynolds nttmber, under both steady and unsteady inflows. Static pressure distributions along the blade surfaces as well as total pressure distri- butions in a downstream tangential plane have been measured to evaluate the overall aerodynamic efficiency of the blade for the different conditions. Particle. Image Velocimetry has been adopted to analyze the time-mean and time-varying velocity fields. The flow field has been surveyed in two orthogonal planes (a blade-to-blade plane and a wall-parallel one). These measurements allow the identification of the Kelvin-Helmholtz large scale cohe- rent structures shed as a consequence of the boundary layer laminar separation under steady inflow, as well as the investigation of the three-dimensional effects induced by the intermittent passage of low and high speed streaks. A close inspection of the time-mean velocity profiles as well as of the boundary layer integral parameters helps to characterize the suction side boundary layer state, thus justifying the influence of free-stream turbulence intensity on the blade aerodynamic losses measured under steady and unsteady inflows. 展开更多
关键词 profile losses high-lift profiles free-stream turbulence STREAKS unsteady flows.
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部