An input-output signal selection based on Phillips-Heffron model of a parallel high voltage alternative current/high voltage direct current(HVAC/HVDC) power system is presented to study power system stability. It is w...An input-output signal selection based on Phillips-Heffron model of a parallel high voltage alternative current/high voltage direct current(HVAC/HVDC) power system is presented to study power system stability. It is well known that appropriate coupling of inputs-outputs signals in the multivariable HVDC-HVAC system can improve the performance of designed supplemetary controller. In this work, different analysis techniques are used to measure controllability and observability of electromechanical oscillation mode. Also inputs–outputs interactions are considered and suggestions are drawn to select the best signal pair through the system inputs-outputs. In addition, a supplementary online adaptive controller for nonlinear HVDC to damp low frequency oscillations in a weakly connected system is proposed. The results obtained using MATLAB software show that the best output-input for damping controller design is rotor speed deviation as out put and phase angle of rectifier as in put. Also response of system equipped with adaptive damping controller based on HVDC system has appropriate performance when it is faced with faults and disturbance.展开更多
Recent investigations have shown that with varying the amplitude of the external force, the deterministic ratchets exhibit multiple current reversals, which are undesirable in certain circumstances. To control the mul...Recent investigations have shown that with varying the amplitude of the external force, the deterministic ratchets exhibit multiple current reversals, which are undesirable in certain circumstances. To control the multiple reverse current to unidirectional current, an adaptive control law is presented inspired from the relation between multiple reversaJs current and the chaos-periodic/quasiperiodic transition of the transport velocity. The designed controller can stabilize the transport velocity of ratchets to steady state and suppress any chaos-periodic/quasiperiodic transition, namely, the stable transport in ratchets is achieved, which makes the current sign unchanged.展开更多
The dynamic behavior of rotors is highly influenced by bearing characteristics. In previous works, the authors have shown that it may be beneficial to adapt the bearing behavior to the shaft behavior. Several adaptive...The dynamic behavior of rotors is highly influenced by bearing characteristics. In previous works, the authors have shown that it may be beneficial to adapt the bearing behavior to the shaft behavior. Several adaptive and active components will be developed in this paper in order to control the shaft dynamical amplitude. Different models of hydrodynamic bearings behavior are described. The Reynolds equation resolution may be done by numerical or analytical solutions. A physical analysis of the equation of thin films will identify the most sensitive parameters. The shaft flexibility is taking into account by a modal approach. The fluid-structure coupling process is a simulation, step by step, of the rotor behavior. At each step, the nonlinear fluid force is numerically calculated to obtain the unbalanced shaft response. The results, presented in this paper, concern the dynamic response of unbalanced shaft mounted in adaptive or active bearings： bearings with variable clearance, variable viscosity or variable housing speed. It is shown that the fluid bearing parameters must be adapted to the rotor speed （in particular near or far a critical speed）. Then, the paper presents a new kind of active bearing. It works with a mechanical control of the housing position. Several parameters are tested and compared. The robustness of the dynamic control parameters is presented. In conclusion, the bearing adaptation could be very useful to control the shaft dynamic. This limits the effect of the critical speed, in particular by diminishing the shaft amplitude and the dynamic forces transmitted to the housing.展开更多
文摘An input-output signal selection based on Phillips-Heffron model of a parallel high voltage alternative current/high voltage direct current(HVAC/HVDC) power system is presented to study power system stability. It is well known that appropriate coupling of inputs-outputs signals in the multivariable HVDC-HVAC system can improve the performance of designed supplemetary controller. In this work, different analysis techniques are used to measure controllability and observability of electromechanical oscillation mode. Also inputs–outputs interactions are considered and suggestions are drawn to select the best signal pair through the system inputs-outputs. In addition, a supplementary online adaptive controller for nonlinear HVDC to damp low frequency oscillations in a weakly connected system is proposed. The results obtained using MATLAB software show that the best output-input for damping controller design is rotor speed deviation as out put and phase angle of rectifier as in put. Also response of system equipped with adaptive damping controller based on HVDC system has appropriate performance when it is faced with faults and disturbance.
基金Supported by the National Natural Science Foundation of China under Grant Nos. 10862001 and 10947011the Construction of Key Laboratories in Universities of Guangxi under Grant No. 200912
文摘Recent investigations have shown that with varying the amplitude of the external force, the deterministic ratchets exhibit multiple current reversals, which are undesirable in certain circumstances. To control the multiple reverse current to unidirectional current, an adaptive control law is presented inspired from the relation between multiple reversaJs current and the chaos-periodic/quasiperiodic transition of the transport velocity. The designed controller can stabilize the transport velocity of ratchets to steady state and suppress any chaos-periodic/quasiperiodic transition, namely, the stable transport in ratchets is achieved, which makes the current sign unchanged.
文摘The dynamic behavior of rotors is highly influenced by bearing characteristics. In previous works, the authors have shown that it may be beneficial to adapt the bearing behavior to the shaft behavior. Several adaptive and active components will be developed in this paper in order to control the shaft dynamical amplitude. Different models of hydrodynamic bearings behavior are described. The Reynolds equation resolution may be done by numerical or analytical solutions. A physical analysis of the equation of thin films will identify the most sensitive parameters. The shaft flexibility is taking into account by a modal approach. The fluid-structure coupling process is a simulation, step by step, of the rotor behavior. At each step, the nonlinear fluid force is numerically calculated to obtain the unbalanced shaft response. The results, presented in this paper, concern the dynamic response of unbalanced shaft mounted in adaptive or active bearings： bearings with variable clearance, variable viscosity or variable housing speed. It is shown that the fluid bearing parameters must be adapted to the rotor speed （in particular near or far a critical speed）. Then, the paper presents a new kind of active bearing. It works with a mechanical control of the housing position. Several parameters are tested and compared. The robustness of the dynamic control parameters is presented. In conclusion, the bearing adaptation could be very useful to control the shaft dynamic. This limits the effect of the critical speed, in particular by diminishing the shaft amplitude and the dynamic forces transmitted to the housing.
