拖曳声纳鱼雷的航行动力学模型等价性研究

给出了拖曳声纳鱼雷的动力学仿真与控制算法,采用计算效率较高的离散和递推的方法,算法以f1=fn=0为边界条件进行校核,当该条件满足时,就得到了系统的真实运动.加速度修正方法及搜索方向由优化方法给出,在此动力学模型的基础上,也可以获得封闭的解析式方程,只不过系统方程随n的增加会相当复杂.同时给出了基于Gauss原理的方法,并证明了它们之间的等价性.

船舶静水航行水动力模型的简化及其应用

针对现有船舶水动力模型考虑因素多、通用性差的缺点,通过简化船体线形、忽略波浪和风向等复杂因素的影响,对船舶水动力模型进行研究。推导静水面船体的迎流区域范围,计算水流作用在船体微小面元上的动压力,得出整船水流总阻力计算模型。在此基础上,给出船体航行动力学模型,分析船舶在静水面航行中动力、水阻力和运动状态之间的关系。将该水动力模型应用于船舶稳定航行控制,结果表明模型具有较好的实用性。

Numerical computation and analysis of unsteady viscous flow around autonomous underwater vehicle with propellers based on sliding mesh

The flexible transmission shaft and wheel propeller are combined as the kinetic source equipment, which realizes the nmlti-motion modes of the autonomous underwater vehicle （AUV） such as vectored thruster and wheeled movement. In order to study the interactional principle between the hull and the wheel propellers while the AUV navigating in water, the computational fluid dynamics （CFD） method is used to simulate numerically the unsteady viscous flow around AUV with propellers by using the Reynolds-averaged Navier-Stokes （RANS） equations, shear-stress transport （SST） k-w model and pressure with splitting of operators （PISO） algorithm based on sliding mesh. The hydrodynamic parameters of AUV with propellers such as resistance, pressure and velocity are got, which reflect well the real ambient flow field of AUV with propellers. Then, the semi-implicit method for pressure-linked equations （SIMPLE） algorithm is used to compute the steady viscous flow field of AUV hull and propellers, respectively. The computational results agree well with the experimental data, which shows that the numerical method has good accuracy in the prediction of hydrodynamic performance. The interaction between AUV hull and wheel propellers is predicted qualitatively and quantitatively by comparing the hydrodynamic parameters such as resistance, pressure and velocity with those from integral computation and partial computation of the viscous flow around AUV with propellers, which provides an effective reference to the shady on noise and vibration of AUV hull and propellers in real environment. It also provides technical support for the design of new AUVs.

A Potential Flow Based Flight Simulator for an Underwater Glider

Underwater gliders are recent innovative types of autonomous underwater vehicles （AUVs） used in ocean exploration and observation. They adjust their buoyancy to dive and to return to the ocean surface. During the change of altitude, they use the hydrodynamic forces developed by their wings to move forward. Their flights are controlled by changing the position of their centers of gravity and their buoyancy to adjust their trim and heel angles. For better flight control, the understanding of the hydrodynamic behavior and the flight mechanics of the underwater glider is necessary. A 6-DOF motion simulator is coupled with an unsteady potential flow model for this purpose. In some specific cases, the numerical study demonstrates that an inappropriate stabilizer dimension can cause counter-steering behavior. The simulator can be used to improve the automatic flight control. It can also be used for the hydrodynamic design optimization of the devices.

Numerical computation and analysis of high-speed autonomous underwater vehicle (AUV) moving in head sea based on dynamic mesh

Autonomous underwater vehicles （AUVs） navigating on the sea surface are usually required to complete the communication tasks in complex sea conditions. The movement forms and flow field characteristics of a multi-moving state AUV navigating in head sea at high speed were studied. The mathematical model on longitudinal motion of the high-speed AUV in head sea was established with considering the hydrodynamic lift based on strip theory, which was solved to get the heave and pitch of the AUV by Gaussian elimination method. Based on this, computational fluid dynamics （CFD） method was used to establish the mathematical model of the unsteady viscous flow around the AUV with considering free surface effort by using the Reynolds-averaged Navier-Stokes （RANS） equations, shear-stress transport （SST） k-w model and volume of fluid （VOF） model. The three-dimensional numerical wave in the computational field was realized through defining the unsteady inlet boundary condition. The motion forms of the AUV navigating in head sea at high speed were carried out by the program source code of user-defined function （UDF） based on dynamic mesh. The hydrodynamic parameters of the AUV such as drag, lift, pitch torque, velocity, pressure and wave profile were got, which reflect well the real ambient flow field of the AUV navigating in head sea at high speed. The computational wave profile agrees well with the experimental phenomenon of a wave-piercing surface vehicle. The force law of the AUV under the impacts of waves was analyzed qualitatively and quantitatively, which provides an effective theoretical guidance and technical support for the dynamics research and shape design of the AUV in real complex environnaent.

Dynamics Modeling and Simulation of Autonomous Underwater Vehicles with Appendages

To provide a simulation system platform for designing and debugging a small autonomous underwater vehicle＇s （AUV） motion controller, a six-degree of freedom （6-DOF） dynamic model for AUV controlled by thruster and fins with appendages is examined. Based on the dynamic model, a simulation system for the AUV＇s motion is established. The different kinds of typical motions are simulated to analyze the motion performance and the maneuverability of the AUV. In order to evaluate the influences of appendages on the motion performance of the AUV, simulations of the AUV with and without appendages are performed and compared. The results demonstrate the AUV has good maneuverability with and without appendages.

Spacecraft motion analysis about rapid rotating small body

The orbital dynamics equation of a spacecraft around an irregular sphere small body is established based on the small body’s gravitational potential approximated with a tri-axial ellipsoid. According to the Jacobi integral constant, the spacecraft zero-velocity curves in the vicinity of the small body is described and feasible motion region is analyzed. The limited condition and the periapsis radius corresponding to different eccentricity against impact surface are presented. The stability of direct and retrograde equator orbits is analyzed based on the perturbation solutions of mean orbit elements.

Counter Rotating Fans- An Aircraft Propulsion for the Future?

In the mid seventies a new propulsor for aircraft was designed and investigated - the so-called PROPFAN. With regard to the total pressure increase, it ranges between a conventional propeller and a turbofan with very high bypass ratio. This new propulsion system promised a reduction in fuel consumption of 15 to 25% compared to engines at that time.A lot of propfans (Hamilton Standard, USA) with different numbers of blades and blade shapes have been designed and tested in wind tunnels in order to find an optimum in efficiency, Fig.1. Parallel to this development GE, USA, made a design of a counter rotating unducted propfan, the so-called UDF, Fig.2. A prototype engine was manufactured and investigated on an in-flight test bed mounted at the MD82 and the B727. Since that time there has not been any further development of propfans (except AN 70 with NK 90-engine, Ukraine, which is more or less a propeller design) due to relatively low fuel prices and technical obstacles. Only technical programs in different countries are still going on in order to prepare a data base for designing counter rotating fans in terms of aeroacoustics, aerodynamics and aeroelasticities. In DLR, Germany, a lot of experimental and numerical work has been undertaken to understand the physical behaviour of the unsteady flow in a counter rotating fan.