This study investigates the resistance of a transport ship navigating in level ice by conducting a series of model tests in an ice tank at Tianjin University. The laboratory-scale model ship was mounted on a rigid car...This study investigates the resistance of a transport ship navigating in level ice by conducting a series of model tests in an ice tank at Tianjin University. The laboratory-scale model ship was mounted on a rigid carriage using a one-directional load cell and then towed through an ice sheet at different speeds. We observed the ice-breaking process at different parts of the ship and motion of the ice floes and measured the resistances under different speeds to determine the relationship between the ice-breaking process and ice resistance. The bending failure at the shoulder area was found to cause maximum resistance. Furthermore, we introduced the analytical method of Lindqvist （1989） for estimating ice resistance and then compared these calculated results with those from our model tests. The results indicate that the calculated total resistances are higher than those we determined in the model tests.展开更多
Physical testing of large-scale ship models at sea is a new experimental method.It is a cheap and reliable way to research the environment adaptability of a ship in complex and extreme wave conditions.It is necessary ...Physical testing of large-scale ship models at sea is a new experimental method.It is a cheap and reliable way to research the environment adaptability of a ship in complex and extreme wave conditions.It is necessary to have a stable experimental system for the test.Since the experimental area is large, a remote control system and a telemetry system are essential, and were designed by the authors.An experiment was conducted on the Songhuajiang River to test the systems.The relationship between the model's speed and its electromotor's revolutions was also measured during the model test.The results showed that the two systems make it possible to carry out large-scale model tests at sea.展开更多
This paper presents the results of an experimental investigation dealing with the effect of bow overhang extensions on the quantity of shipping water over the foredeck in case of ships advancing in regular head waves....This paper presents the results of an experimental investigation dealing with the effect of bow overhang extensions on the quantity of shipping water over the foredeck in case of ships advancing in regular head waves. To perform this investigation, a series of free-running tests was conducted in regular waves using an experimental model of a multipurpose cargo ship to quantify the amount of shipping water. The tests were performed on five bow overhang variants with several combinations of wavelength and ship speed conditions. It was observed that the quantity of shipping water was affected by some parameters such as wavelength, ship speed, and bow shape in terms of an overhang extension. The results show the significant influence of an overhang extension, which is associated with the bow flare shape, on the occurrence of water shipping. These results involve the combined incoming regular waves and model speed.展开更多
In this paper the performance of a BOC-50＇ sailing yacht model in calm water and in realistic sea states is investigated experimentally. A scaled model of the hull form with the keel-bulb configuration has been teste...In this paper the performance of a BOC-50＇ sailing yacht model in calm water and in realistic sea states is investigated experimentally. A scaled model of the hull form with the keel-bulb configuration has been tested in the towing tank of the LSMH of NTUA. During the tests the calm water resistance and the dynamic responses, including the added resistance in waves were recorded. Results referring to the resistance, the side force, the CG displacement, the pitch as well as the vertical accelerations of the model at the bow, the CG and the stern are presented. Moreover, by using a Velocity Prediction Program the polar and the stability diagram of the tested sailing yacht were calculated. Useful conclusions about the dynamic behavior of the model were obtained.展开更多
The inclining experiment is the only regulatory tool to assess ship stability. This experiment is a time consuming process for both real-life tests and ship model experiments. The difficulty is mainly due to a bias in...The inclining experiment is the only regulatory tool to assess ship stability. This experiment is a time consuming process for both real-life tests and ship model experiments. The difficulty is mainly due to a bias in the measurement of heel angle. Nowadays, digital inclinometers are available, but they are expensive. In this study, the use of a smartphone application is presented for ship inclination and rolling-period tests. The idea consists of using accelerometer and gyroscope sensors built into the current smartphones for the measurements. Therefore, some experiments are carried out on an example trawler model to exhibit the uses and advantages of this method. The obtained results are in good agreement with those provided from the pendulum method and natural roll-period test. This application is new, easy, and more accurately assesses metacentric height during the inclining and rolling-period tests.展开更多
Over the past decades, there has been continual construction of sea-crossing bridges as the technology of transportation improves. The probability of bridge pier being subjected to more vehicular impact is also growin...Over the past decades, there has been continual construction of sea-crossing bridges as the technology of transportation improves. The probability of bridge pier being subjected to more vehicular impact is also growing. This study performed scale model tests and analyzed a collision mechanism considering the non-navigable span of a sea-crossing bridge in East China Sea as an engineering background. Comparing the test results with the finite element calculations, the dynamic response of the sample bridge and local damages of the fragile components under impact force were evaluated. Subsequently, the time-frequency characteristics of the vibration signal were analyzed based on wavelet packet analysis, and the multi-resolution characteristics as well as energy distribution of the vibration signal were discussed. It was observed that the impact energy transferred from ship to pier during the period of collision distributed different frequency bands with varying characteristics. The main frequency band(0–62.5 Hz) contains more than 75% of the vibration energy. The analysis can provide a basis for structural damage identification after the collision and anti-collision design of bridges.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos. 51179123 and 51279131
文摘This study investigates the resistance of a transport ship navigating in level ice by conducting a series of model tests in an ice tank at Tianjin University. The laboratory-scale model ship was mounted on a rigid carriage using a one-directional load cell and then towed through an ice sheet at different speeds. We observed the ice-breaking process at different parts of the ship and motion of the ice floes and measured the resistances under different speeds to determine the relationship between the ice-breaking process and ice resistance. The bending failure at the shoulder area was found to cause maximum resistance. Furthermore, we introduced the analytical method of Lindqvist （1989） for estimating ice resistance and then compared these calculated results with those from our model tests. The results indicate that the calculated total resistances are higher than those we determined in the model tests.
基金Supported by the National Defense Foundation under Grant No.51414030204CB0109
文摘Physical testing of large-scale ship models at sea is a new experimental method.It is a cheap and reliable way to research the environment adaptability of a ship in complex and extreme wave conditions.It is necessary to have a stable experimental system for the test.Since the experimental area is large, a remote control system and a telemetry system are essential, and were designed by the authors.An experiment was conducted on the Songhuajiang River to test the systems.The relationship between the model's speed and its electromotor's revolutions was also measured during the model test.The results showed that the two systems make it possible to carry out large-scale model tests at sea.
文摘This paper presents the results of an experimental investigation dealing with the effect of bow overhang extensions on the quantity of shipping water over the foredeck in case of ships advancing in regular head waves. To perform this investigation, a series of free-running tests was conducted in regular waves using an experimental model of a multipurpose cargo ship to quantify the amount of shipping water. The tests were performed on five bow overhang variants with several combinations of wavelength and ship speed conditions. It was observed that the quantity of shipping water was affected by some parameters such as wavelength, ship speed, and bow shape in terms of an overhang extension. The results show the significant influence of an overhang extension, which is associated with the bow flare shape, on the occurrence of water shipping. These results involve the combined incoming regular waves and model speed.
文摘In this paper the performance of a BOC-50＇ sailing yacht model in calm water and in realistic sea states is investigated experimentally. A scaled model of the hull form with the keel-bulb configuration has been tested in the towing tank of the LSMH of NTUA. During the tests the calm water resistance and the dynamic responses, including the added resistance in waves were recorded. Results referring to the resistance, the side force, the CG displacement, the pitch as well as the vertical accelerations of the model at the bow, the CG and the stern are presented. Moreover, by using a Velocity Prediction Program the polar and the stability diagram of the tested sailing yacht were calculated. Useful conclusions about the dynamic behavior of the model were obtained.
文摘The inclining experiment is the only regulatory tool to assess ship stability. This experiment is a time consuming process for both real-life tests and ship model experiments. The difficulty is mainly due to a bias in the measurement of heel angle. Nowadays, digital inclinometers are available, but they are expensive. In this study, the use of a smartphone application is presented for ship inclination and rolling-period tests. The idea consists of using accelerometer and gyroscope sensors built into the current smartphones for the measurements. Therefore, some experiments are carried out on an example trawler model to exhibit the uses and advantages of this method. The obtained results are in good agreement with those provided from the pendulum method and natural roll-period test. This application is new, easy, and more accurately assesses metacentric height during the inclining and rolling-period tests.
基金supported by the National Key Research and Development Program of China(No.2018YFC0809604)the National Natural Science Foundation of China(Nos.U1709207 and 51578506)。
文摘Over the past decades, there has been continual construction of sea-crossing bridges as the technology of transportation improves. The probability of bridge pier being subjected to more vehicular impact is also growing. This study performed scale model tests and analyzed a collision mechanism considering the non-navigable span of a sea-crossing bridge in East China Sea as an engineering background. Comparing the test results with the finite element calculations, the dynamic response of the sample bridge and local damages of the fragile components under impact force were evaluated. Subsequently, the time-frequency characteristics of the vibration signal were analyzed based on wavelet packet analysis, and the multi-resolution characteristics as well as energy distribution of the vibration signal were discussed. It was observed that the impact energy transferred from ship to pier during the period of collision distributed different frequency bands with varying characteristics. The main frequency band(0–62.5 Hz) contains more than 75% of the vibration energy. The analysis can provide a basis for structural damage identification after the collision and anti-collision design of bridges.
