A detailed mineralogical characterization of a tin-polymetallic ore from Mengzi,Yunnan Province,China,was undertaken by automated electron microprobe-based mineral mapping and quantitative analysis methods.The results...A detailed mineralogical characterization of a tin-polymetallic ore from Mengzi,Yunnan Province,China,was undertaken by automated electron microprobe-based mineral mapping and quantitative analysis methods.The results show that the most valuable metal is Sn（0.98%,mass fraction）.The main tin minerals are cassiterite and stannite,which account for 94.90% of total tin.Other metals,such as Cu（0.261%）,Zn（0.612%） and Pb（0.296%） can also be seen as valuable metal to be recovered.Minerals such as pyrrhotite,pyrite,arsenopyrite,sphalerite,galena and chalcopyrite are disseminated in the ore.Quartz,sericite and dolomite are the main gangue.The optimal grinding fineness should be chosen as 0.037 mm to make sure that most of the tin minerals can be liberated from other minerals.展开更多
Electroless copper plating on diamond particles precoated with 1%Cr was carried out to evaluate the effects of various experimental parameters on coating quality and deposition rate to obtain the optimized reaction pa...Electroless copper plating on diamond particles precoated with 1%Cr was carried out to evaluate the effects of various experimental parameters on coating quality and deposition rate to obtain the optimized reaction parameters. The formulated samples under optimized parameters were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectra and optical microscopy. The best parameters, where uniform and maximum coating thickness was achieved, are etching with 20%NaOH for 30 min, sensitization and activation with SnCl2 and PdCl2 for 5 and 20 min, respectively. The composition of the copper solution bath was 16 g/L CuSO4＆#183;5H2O, 35 mL/L formaldehyde （HCHO）, 23 g/L KNaC4H4O6 at 60 ℃, pH=13 and stirring at （350±15） r/min under ultrasonication.展开更多
A new method for manufacturing explosive charge liner of petroleum perforation bullet, using hot press sintering technique, has been introduced in the paper. The sintering process of making explosive charge liner has...A new method for manufacturing explosive charge liner of petroleum perforation bullet, using hot press sintering technique, has been introduced in the paper. The sintering process of making explosive charge liner has been investigated. The mechanical test and SEM analysis indicate that the property of the liner produced by the process is satisfied.展开更多
A hybrid approach using MLD (mixed logical dynamical) framework to handle infeasibility and constraint prioritization issues in MPC (model predictive control) based on input-output model is introduced. By expressing c...A hybrid approach using MLD (mixed logical dynamical) framework to handle infeasibility and constraint prioritization issues in MPC (model predictive control) based on input-output model is introduced. By expressing constraint priorities as propositional logics and by transforming the propositional logics into inequalities,the infeasibility and constraint prioritization issues are solved in the MPC. Constraints with higher priorities are met first, and then these with lower priorities are satisfied as much as possible. This new approach is illustrated in the control of a heavy oil fractionator-Shell column. The overall control performance has been significantly improved through the infeasibility and control priorities handling.展开更多
[Objective] This study aimed to investigate the optimal condition for extrac- tion of ellagic acid from pomegranate peels. [Method] With ellagic acid yield as an indicator, ultrasound extraction method was adopted to ...[Objective] This study aimed to investigate the optimal condition for extrac- tion of ellagic acid from pomegranate peels. [Method] With ellagic acid yield as an indicator, ultrasound extraction method was adopted to extract the ellagic acid from pomegranate peels, and the concentration of ellagic acid was measured by using ul- traviolet spectrophotometry; L9（34） orthogonal experiment was designed with four fac- tors at three levels, to investigate the effect of extraction temperature, extraction du- ration, solid-liquid ratio and ultrasound power on extraction rate of ellagic acid. [Re- sult] The optimal extraction condition for ellagic acid is extraction temperature of 30 ~C, solid-liquid ratio of 1：200, extraction duration of 20 min, and ultrasound power of 50 W. The relationship between primary and secondary factors affecting experimental indicators was solid-liquid ratio 〉 extraction duration 〉 ultrasound power 〉 extraction temperature. [Conclusion] Solid-liquid ratio has the maximum effect on extraction rate of ellagic acid. The ellagic acid extraction technology identified in this study is rea- sonable and feasible.展开更多
Advanced feedback control for optimal operation of mineral grinding process is usually based on the model predictive control (MPC) dynamic optimization. Since the MPC does not handle disturbances directly by controlle...Advanced feedback control for optimal operation of mineral grinding process is usually based on the model predictive control (MPC) dynamic optimization. Since the MPC does not handle disturbances directly by controller design, it cannot achieve satisfactory effects in controlling complex grinding processes in the presence of strong disturbances and large uncertainties. In this paper, an improved disturbance observer (DOB) based MPC advanced feedback control is proposed to control the multivariable grinding operation. The improved DOB is based on the optimal achievable H 2 performance and can deal with disturbance observation for the nonminimum-phase delay systems. In this DOB-MPC advanced feedback control, the higher-level optimizer computes the optimal operation points by maximize the profit function and passes them to the MPC level. The MPC acts as a presetting controller and is employed to generate proper pre-setpoint for the lower-level basic feedback control system. The DOB acts as a compensator and improves the operation performance by dynamically compensating the setpoints for the basic control system according to the observed various disturbances and plant uncertainties. Several simulations are performed to demonstrate the proposed control method for grinding process operation.展开更多
A new kind of solvent for deacidification of distillate oils was introduced in this paper. After successful laboratory study this technology had been applied in commercial scale successfully. Compared to traditional c...A new kind of solvent for deacidification of distillate oils was introduced in this paper. After successful laboratory study this technology had been applied in commercial scale successfully. Compared to traditional caustic wash of distillate oils, this technology has a lot of merits, such as the broad range of distillates to be processed, low caustic consumption, recycle of deacidifying agent, absence of waste caustic discharge, and low equipment revamp expenses, which can have promising perspectives for exploitation and application of this technology.展开更多
Sudan Khartoum Refinery Co. has selected a unique route featuring delayed coking of crude in connection with the highly sour and high-calcium heavy crude extracted from Sudanese oil block No. 6.The crude oil after pre...Sudan Khartoum Refinery Co. has selected a unique route featuring delayed coking of crude in connection with the highly sour and high-calcium heavy crude extracted from Sudanese oil block No. 6.The crude oil after pretreatment for calcium removal is subjected to coking for removal of acids and metals with the coker products being further processed. The crude oil extracted from Sudanese oil block No. 6contains as high as 13 mg KOH/g of crude in addition to a calcium content of 1600 ppm. This article makes an analysis on problems related with the operation of commercial delayed coking unit for processing of highly sour crude and bring forth measures to solve these problems. The liquid yield resulted from coking of crude oil can reach 82m%, and the petroleum coke can meet the quality requirement for class 3B petroleum coke.展开更多
In order to offer high grade concentrate to produce alumina by Bayer, the reverse-flotation technology of bauxite was investigated. The results show that sodium hexmetaphosphate has different depression on the flotati...In order to offer high grade concentrate to produce alumina by Bayer, the reverse-flotation technology of bauxite was investigated. The results show that sodium hexmetaphosphate has different depression on the flotation of diaspore and kaolinite. The recoveries of diaspore decrease markedly with the increase of the concentration of sodium hexmetaphosphate with dodecyl-amine as collector. Fourier transform infrared spectra indicate that the absorbance band 875cm -1 of the asymmetric stretching vibration of bridge oxygen P—O—P shifts to 880cm -1 , and the 1264cm -1 of the asymmetric stretching vibration of the bridge PO2 shifts to 1267cm -1 in the diaspore’s spectra. This demonstrates that sodium hexmetaphosphate interacts through bridging PO2 groups with the Al atoms exposed on the diaspore and kaolinite surfaces to form P—O—Al bond. Adsorption measurements also testify that sodium hexmetaphosphate adsorbs easily on the surface of diaspore. The adsorption density of PO-3 on the surface of diaspore is about 4.7×10 -6 mol/m2, while that on the kaolinite is only about 3.5×10 -7 mol/m2 when pH value is 6.展开更多
The 40kt/a sulfur recovery unit for tail gas treating applying the reduction-absorption-recycling (RAR) technology is aimed at regeneration of the rich amine solution and recovery of sulfur to operate in tandem with t...The 40kt/a sulfur recovery unit for tail gas treating applying the reduction-absorption-recycling (RAR) technology is aimed at regeneration of the rich amine solution and recovery of sulfur to operate in tandem with the 1.2Mt/a diesel hydrofining unit. The process unit calibration data have revealed that the recovery of total sulfur reaches 99.86%, which is 6.65 percentage points higher than that before application of the RAR technology. The SO2 content in vented tail gas is 0.27 t/d, which is much less than the latest emission standard prescribed by the State. The factors that can affect the unit operation have been analyzed and corresponding measures have been suggested including the necessity to improve the control over the reaction temperature in the tail gas hydrogenation unit.展开更多
The study on options for catalytic cracking of VGO derived from the Kazakhstan-Russian mixed crude was carried out in a small-scale riser FCC unit. The influence of several catalysts and the LCC-A additive for increas...The study on options for catalytic cracking of VGO derived from the Kazakhstan-Russian mixed crude was carried out in a small-scale riser FCC unit. The influence of several catalysts and the LCC-A additive for increasing propylene yield on the distribution and quality of FCC products was analyzed. This article sets forth the possible issues arising from processing the Kazakhstan-Russian mixed crude in FCC unit and the response measures to be adopted.展开更多
β-Sialon/ZrN bonded corundum composites were synthesized using fused white corundum,alumina micro powder,zircon and carbon black by nitridation reaction sintering process. Phase composition and microstructure of the ...β-Sialon/ZrN bonded corundum composites were synthesized using fused white corundum,alumina micro powder,zircon and carbon black by nitridation reaction sintering process. Phase composition and microstructure of the synthesized composites were investigated by X-ray powder diffraction and scanning electronic microscope,and the formation process of the composites was discussed. The results show that the composites with different compositions can be obtained by controlling the heating temperature and contents of zircon and carbon black. The proper temperature to synthesize the composites is 1773 K.展开更多
基金Project(50774094) supported by the National Natural Science Foundation of ChinaProject(2010CB630905) supported the National Basic Research Program of China
文摘A detailed mineralogical characterization of a tin-polymetallic ore from Mengzi,Yunnan Province,China,was undertaken by automated electron microprobe-based mineral mapping and quantitative analysis methods.The results show that the most valuable metal is Sn（0.98%,mass fraction）.The main tin minerals are cassiterite and stannite,which account for 94.90% of total tin.Other metals,such as Cu（0.261%）,Zn（0.612%） and Pb（0.296%） can also be seen as valuable metal to be recovered.Minerals such as pyrrhotite,pyrite,arsenopyrite,sphalerite,galena and chalcopyrite are disseminated in the ore.Quartz,sericite and dolomite are the main gangue.The optimal grinding fineness should be chosen as 0.037 mm to make sure that most of the tin minerals can be liberated from other minerals.
基金Project(9140A12060110BQ03)supported by the National Key Laboratory of Science and Technology on Materials under Shock and Impact,China
文摘Electroless copper plating on diamond particles precoated with 1%Cr was carried out to evaluate the effects of various experimental parameters on coating quality and deposition rate to obtain the optimized reaction parameters. The formulated samples under optimized parameters were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectra and optical microscopy. The best parameters, where uniform and maximum coating thickness was achieved, are etching with 20%NaOH for 30 min, sensitization and activation with SnCl2 and PdCl2 for 5 and 20 min, respectively. The composition of the copper solution bath was 16 g/L CuSO4＆#183;5H2O, 35 mL/L formaldehyde （HCHO）, 23 g/L KNaC4H4O6 at 60 ℃, pH=13 and stirring at （350±15） r/min under ultrasonication.
文摘A new method for manufacturing explosive charge liner of petroleum perforation bullet, using hot press sintering technique, has been introduced in the paper. The sintering process of making explosive charge liner has been investigated. The mechanical test and SEM analysis indicate that the property of the liner produced by the process is satisfied.
基金Supported by the 973 Program (No. 2002CB312200)National High Tech. Project of China (863/CIMS 2004AA412050).
文摘A hybrid approach using MLD (mixed logical dynamical) framework to handle infeasibility and constraint prioritization issues in MPC (model predictive control) based on input-output model is introduced. By expressing constraint priorities as propositional logics and by transforming the propositional logics into inequalities,the infeasibility and constraint prioritization issues are solved in the MPC. Constraints with higher priorities are met first, and then these with lower priorities are satisfied as much as possible. This new approach is illustrated in the control of a heavy oil fractionator-Shell column. The overall control performance has been significantly improved through the infeasibility and control priorities handling.
基金Supported by College-level Special Fund of Sichuan Agricultural University(06070904)~~
文摘[Objective] This study aimed to investigate the optimal condition for extrac- tion of ellagic acid from pomegranate peels. [Method] With ellagic acid yield as an indicator, ultrasound extraction method was adopted to extract the ellagic acid from pomegranate peels, and the concentration of ellagic acid was measured by using ul- traviolet spectrophotometry; L9（34） orthogonal experiment was designed with four fac- tors at three levels, to investigate the effect of extraction temperature, extraction du- ration, solid-liquid ratio and ultrasound power on extraction rate of ellagic acid. [Re- sult] The optimal extraction condition for ellagic acid is extraction temperature of 30 ~C, solid-liquid ratio of 1：200, extraction duration of 20 min, and ultrasound power of 50 W. The relationship between primary and secondary factors affecting experimental indicators was solid-liquid ratio 〉 extraction duration 〉 ultrasound power 〉 extraction temperature. [Conclusion] Solid-liquid ratio has the maximum effect on extraction rate of ellagic acid. The ellagic acid extraction technology identified in this study is rea- sonable and feasible.
基金Supported by the National Natural Science Foundation of China (61104084, 61290323)the Guangdong Education University-Industry Cooperation Projects (2010B090400410)
文摘Advanced feedback control for optimal operation of mineral grinding process is usually based on the model predictive control (MPC) dynamic optimization. Since the MPC does not handle disturbances directly by controller design, it cannot achieve satisfactory effects in controlling complex grinding processes in the presence of strong disturbances and large uncertainties. In this paper, an improved disturbance observer (DOB) based MPC advanced feedback control is proposed to control the multivariable grinding operation. The improved DOB is based on the optimal achievable H 2 performance and can deal with disturbance observation for the nonminimum-phase delay systems. In this DOB-MPC advanced feedback control, the higher-level optimizer computes the optimal operation points by maximize the profit function and passes them to the MPC level. The MPC acts as a presetting controller and is employed to generate proper pre-setpoint for the lower-level basic feedback control system. The DOB acts as a compensator and improves the operation performance by dynamically compensating the setpoints for the basic control system according to the observed various disturbances and plant uncertainties. Several simulations are performed to demonstrate the proposed control method for grinding process operation.
文摘A new kind of solvent for deacidification of distillate oils was introduced in this paper. After successful laboratory study this technology had been applied in commercial scale successfully. Compared to traditional caustic wash of distillate oils, this technology has a lot of merits, such as the broad range of distillates to be processed, low caustic consumption, recycle of deacidifying agent, absence of waste caustic discharge, and low equipment revamp expenses, which can have promising perspectives for exploitation and application of this technology.
文摘Sudan Khartoum Refinery Co. has selected a unique route featuring delayed coking of crude in connection with the highly sour and high-calcium heavy crude extracted from Sudanese oil block No. 6.The crude oil after pretreatment for calcium removal is subjected to coking for removal of acids and metals with the coker products being further processed. The crude oil extracted from Sudanese oil block No. 6contains as high as 13 mg KOH/g of crude in addition to a calcium content of 1600 ppm. This article makes an analysis on problems related with the operation of commercial delayed coking unit for processing of highly sour crude and bring forth measures to solve these problems. The liquid yield resulted from coking of crude oil can reach 82m%, and the petroleum coke can meet the quality requirement for class 3B petroleum coke.
文摘In order to offer high grade concentrate to produce alumina by Bayer, the reverse-flotation technology of bauxite was investigated. The results show that sodium hexmetaphosphate has different depression on the flotation of diaspore and kaolinite. The recoveries of diaspore decrease markedly with the increase of the concentration of sodium hexmetaphosphate with dodecyl-amine as collector. Fourier transform infrared spectra indicate that the absorbance band 875cm -1 of the asymmetric stretching vibration of bridge oxygen P—O—P shifts to 880cm -1 , and the 1264cm -1 of the asymmetric stretching vibration of the bridge PO2 shifts to 1267cm -1 in the diaspore’s spectra. This demonstrates that sodium hexmetaphosphate interacts through bridging PO2 groups with the Al atoms exposed on the diaspore and kaolinite surfaces to form P—O—Al bond. Adsorption measurements also testify that sodium hexmetaphosphate adsorbs easily on the surface of diaspore. The adsorption density of PO-3 on the surface of diaspore is about 4.7×10 -6 mol/m2, while that on the kaolinite is only about 3.5×10 -7 mol/m2 when pH value is 6.
文摘The 40kt/a sulfur recovery unit for tail gas treating applying the reduction-absorption-recycling (RAR) technology is aimed at regeneration of the rich amine solution and recovery of sulfur to operate in tandem with the 1.2Mt/a diesel hydrofining unit. The process unit calibration data have revealed that the recovery of total sulfur reaches 99.86%, which is 6.65 percentage points higher than that before application of the RAR technology. The SO2 content in vented tail gas is 0.27 t/d, which is much less than the latest emission standard prescribed by the State. The factors that can affect the unit operation have been analyzed and corresponding measures have been suggested including the necessity to improve the control over the reaction temperature in the tail gas hydrogenation unit.
文摘The study on options for catalytic cracking of VGO derived from the Kazakhstan-Russian mixed crude was carried out in a small-scale riser FCC unit. The influence of several catalysts and the LCC-A additive for increasing propylene yield on the distribution and quality of FCC products was analyzed. This article sets forth the possible issues arising from processing the Kazakhstan-Russian mixed crude in FCC unit and the response measures to be adopted.
基金Project(50274021) supported by the National Natural Science Foundation of China and Baoshan Iron and Steel Co., Ltd.
文摘β-Sialon/ZrN bonded corundum composites were synthesized using fused white corundum,alumina micro powder,zircon and carbon black by nitridation reaction sintering process. Phase composition and microstructure of the synthesized composites were investigated by X-ray powder diffraction and scanning electronic microscope,and the formation process of the composites was discussed. The results show that the composites with different compositions can be obtained by controlling the heating temperature and contents of zircon and carbon black. The proper temperature to synthesize the composites is 1773 K.
