管网系统新型配水设施——多功能节制阀

多功能配水节制阀是一种新型地下管道工程配水专用阀门,集三通、阀门于一体,既有三通的作用也有阀门的功能,结构简单,操作方便,价格低,水头损失小。主要用于低压管道灌溉工程。

Improved Water Network Macroscopic Model Utilising Auto-Control Adjusting Valve by PLS

In order to overcome the low precision and weak applicability problems of the current municipal water network state simulation model, the water network structure is studied. Since the telemetry system has been applied increasingly in the water network, and in order to reflect the network operational condition more accurately, a new water network macroscopic model is developed by taking the auto-control adjusting valve opening state into consideration. Then for highly correlated or collinear independent variables in the model, the partial least squares (PLS) regression method provides a model solution which can distinguish between the system information and the noisy data. Finally, a hypothetical water network is introduced for validating the model. The simulation results show that the relative error is less than 5.2%, indicating that the model is efficient and feasible, and has better generalization performance.

Mixed refrigerant composition shift due to throttle valves opening in auto cascade refrigeration system

Auto cascade refrigeration(ACR) cycle with phase separators is widely used in the cryogenic system. The composition of mixed refrigerant has a great effect on the performance of the system. Based on the assumption of infinite volume of phase separator, ACR system with one phase separator is simulated in this paper. The variation of refrigerant composition under different valves opening is obtained. A related experimental system is set up to verify the variation. The result shows that when the valve opening connected to the evaporator increases or the valve opening under the phase separator decreases, the low-boiling component concentration of the working mixture passing through the compressor and condenser increases, while the high-boiling component concentration decreases. Furthermore, the variations of condensation pressure and evaporation pressure under different valves opening are also observed. This paper is helpful to deepen the understanding of ACR system.

Numerical Simulation on a Throttle Governing System with Hydraulic Butterfly Valves in a Marine Environment

Hydraulic butterfly valves have been widely applied in marine engineering because of their large switching torque, low pressure loss and suitability for large and medium diameter pipelines. Due to control problems resulting from switching angular speeds of the hydraulic butterfly valve, a throttle-governing control mode has been widely adopted, and detailed analysis has been carried out worldwide on the structural principle concerning speed-regulation and the load torque on the shaft while opening or closing a hydraulic butterfly valve. However relevant reports have yet been published on the change law, the error and the influencing factors of the rotational angular velocity of the hydraulic butterfly valve while opening and closing. In this article, research was based on some common specifications of a hydraulic butterfly valve with a symmetrical valve flap existing in a marine environment. The throttle governing system supplied by the accumulator to achieve the switching of the hydraulic control valve was adopted, and the mathematical models of the system were established in the actual conditions while the numerical simulations took place. The simulation results and analysis show that the rotational angular velocity and the error of the hydraulic butterfly valve while switching is influenced greatly by the drainage amount of the accumulator, resulting in pressure loss in the pipeline, the temperature of hydraulic medium and the load of the hydraulic butterfly valve. The simulation results and analysis provide a theoretical basis for the choice of the total capacity of the accumulator and pipeline diameters in a throttle governing system with a hydraulic butterfly valve.It also determines the type and specification of the hydraulic butterfly valve and the design of motion parameters of the transported fluid.

Energy-saving technologies for construction machinery:a review of electro-hydraulic pump-valve coordinated system

With the rapid development of the global economy,more and more attention has been paid to the energy conservation of construction machinery.The hydraulic system is the key component of construction machinery,and improving its energy utilization rate has become an important means to achieve energy conservation.In conventional valve-controlled or pump-controlled hydraulic systems of construction machinery,controllability and energy-saving performance typically cannot be considered at the same time.The pump-valve coordinated system combines the energy-saving characteristics of the pump-controlled system and the high-precision and high-frequency response of the valve-controlled system,which has the potential to become a primary research direction of electro-hydraulic systems.This review summarizes the recent research progress in energy-saving technologies based on pump-valve coordinated systems.Particularly,we discuss the structures of hydraulic systems in different categories of construction machinery,various control methods of the electro-hydraulic system,novel hydraulic hybrid energy regeneration systems,and key components.In addition,future directions and challenges of the pump-valve coordinated systems are described,such as independent metering system(IMS),common pressure rail(CPR),and hybrid power source(HPS).