As valuable energy in iron-and steel-making process,by-product gas is widely used in heating and technical processes in steel plant.After being used according to the technical requirements,the surplus by-product gas i...As valuable energy in iron-and steel-making process,by-product gas is widely used in heating and technical processes in steel plant.After being used according to the technical requirements,the surplus by-product gas is usually used for buffer boilers to produce steam.With the rapid development of energy conservation technology and energy consumption level,surplus gas in steel plant continues to get larger.Therefore,it is significant to organize surplus gas among buffer boilers.A dynamic programming model of that issue was established in this work,considering the ramp rate constraint of boilers and the influences of setting gasholders.Then a case study was done.It is shown that dynamic programming dispatch gets more steam generation and less specific gas consumption compared with current proportionate dispatch depending on nominal capacities of boilers.The ignored boiler ramp rate constraint was considered and its contribution to the result validity was pointed out.Finally,the significance of setting gasholders was studied.展开更多
Three types of low-carbon vehicle technologies in China are reviewed. Potential effects are listed for those integrated energy-saving technologies for conventional vehicles. Low carbon transitions, including alternati...Three types of low-carbon vehicle technologies in China are reviewed. Potential effects are listed for those integrated energy-saving technologies for conventional vehicles. Low carbon transitions, including alternative vehicle power train systems and fuels, are discussed on their development status and trends, including life cycle primary fossil energy use and greenhouse gas emissions of each pathway. To further support the low-carbon vehicle technologies development, integrated policies should seek to： （1） employ those integrated energy-saving technologies, （2） apply hybrid electric technology, （3） commercialize electric vehicles through battery technology innovation, （4） support fuel cell vehicles and hydrogen technology R＆D for future potential applications, （5） boost the R＆D of second generation biofuel technology, and （6） conduct further research on applying low-carbon technologies including CO2 capture and storage technology to coal-based transportation solutions.展开更多
The paper studies the metallurgical energy saving standards system, indicates the current siltutinon of standards and proposes a plan for the further standardizalion work. so as to promote new energy saving technologi...The paper studies the metallurgical energy saving standards system, indicates the current siltutinon of standards and proposes a plan for the further standardizalion work. so as to promote new energy saving technologies and application of new process to boost energy eonservation and emission reduction.展开更多
With the analysis on regulating system in 200 MW steam turbine, the necessity of appending the fast-opening function to the original system is set forth and a new type of fast-opening mechanism is devised. The mathema...With the analysis on regulating system in 200 MW steam turbine, the necessity of appending the fast-opening function to the original system is set forth and a new type of fast-opening mechanism is devised. The mathematical model of system is built up. With the use of AMESIM software, the displacement curve of the piston, the force curve of the cartridge valve spool, the pressure curve and the flux curve in the regulation process are obtained based on simulation. The performances of three fast-opening systems composed of cartridge valves with different diameters are compared. Based on the analysis on factors that affect the execution time of fast-opening, the dead zone of the fast-opening system is put forward. To overcome the defect, dif- ferent operation modes are adopted for different zones. The result shows that with the increase of the valve diameter, the regulating time in the dead zone significantly exceeds the fast-opening time in the whole journey. Accordingly, the optimization operation tactic in the dead zone and the qualification conditions are brought forward. The fast-opening system composed of 32 mm cartridge valves is taken as an example with use of the tactic. The simulation result shows that the maximum regulating time is shortened by 509 ms.展开更多
This article take cold regions of nlral residential building envelope as the research object, suitability technical theory as the theoretical basis, we evaluation of rural residential energy envelope because China＇s ...This article take cold regions of nlral residential building envelope as the research object, suitability technical theory as the theoretical basis, we evaluation of rural residential energy envelope because China＇s rural areas is chmacterized by large regional differences and to find a solution for the envelope. It could be considered as the useful reference for retrofit design of similar projects.展开更多
The paper use advantage of local natural resources, greening and sufficient water resources, combine natural ecological environment design with rural architecture, and fully consider local economic base and material t...The paper use advantage of local natural resources, greening and sufficient water resources, combine natural ecological environment design with rural architecture, and fully consider local economic base and material technical conditions, and takes site selection and planning, architectural design technology as the two core aspects to study rural residential energy conservation, improving thermal environment of indoor residential that use of nature building energy saving technique, efforts to reduce the use of mechanical equipment system, thereby reducing the rural residential building energy consumption.展开更多
基金Project(L2012082)supported by the Science and Technology Research Funds of Liaoning Provincial Education Department,China
文摘As valuable energy in iron-and steel-making process,by-product gas is widely used in heating and technical processes in steel plant.After being used according to the technical requirements,the surplus by-product gas is usually used for buffer boilers to produce steam.With the rapid development of energy conservation technology and energy consumption level,surplus gas in steel plant continues to get larger.Therefore,it is significant to organize surplus gas among buffer boilers.A dynamic programming model of that issue was established in this work,considering the ramp rate constraint of boilers and the influences of setting gasholders.Then a case study was done.It is shown that dynamic programming dispatch gets more steam generation and less specific gas consumption compared with current proportionate dispatch depending on nominal capacities of boilers.The ignored boiler ramp rate constraint was considered and its contribution to the result validity was pointed out.Finally,the significance of setting gasholders was studied.
基金co-supported by the China National Social Science Foundation(09&ZD029)MOE Project of Key Research Institute of Humanities and Social Sciences at Universities in China (2009JJD790029)+1 种基金Doctoral Thesis Fund of Beijing Municipal Science and Technology Commission (zz200923)the CAERC program(Tsinghua/ GM/SAIC-China)
文摘Three types of low-carbon vehicle technologies in China are reviewed. Potential effects are listed for those integrated energy-saving technologies for conventional vehicles. Low carbon transitions, including alternative vehicle power train systems and fuels, are discussed on their development status and trends, including life cycle primary fossil energy use and greenhouse gas emissions of each pathway. To further support the low-carbon vehicle technologies development, integrated policies should seek to： （1） employ those integrated energy-saving technologies, （2） apply hybrid electric technology, （3） commercialize electric vehicles through battery technology innovation, （4） support fuel cell vehicles and hydrogen technology R＆D for future potential applications, （5） boost the R＆D of second generation biofuel technology, and （6） conduct further research on applying low-carbon technologies including CO2 capture and storage technology to coal-based transportation solutions.
文摘The paper studies the metallurgical energy saving standards system, indicates the current siltutinon of standards and proposes a plan for the further standardizalion work. so as to promote new energy saving technologies and application of new process to boost energy eonservation and emission reduction.
基金Project (No. NCET-04-0545) supported by the "New Century Elitist Supporting Plan" Fund Project of Education Ministry of China
文摘With the analysis on regulating system in 200 MW steam turbine, the necessity of appending the fast-opening function to the original system is set forth and a new type of fast-opening mechanism is devised. The mathematical model of system is built up. With the use of AMESIM software, the displacement curve of the piston, the force curve of the cartridge valve spool, the pressure curve and the flux curve in the regulation process are obtained based on simulation. The performances of three fast-opening systems composed of cartridge valves with different diameters are compared. Based on the analysis on factors that affect the execution time of fast-opening, the dead zone of the fast-opening system is put forward. To overcome the defect, dif- ferent operation modes are adopted for different zones. The result shows that with the increase of the valve diameter, the regulating time in the dead zone significantly exceeds the fast-opening time in the whole journey. Accordingly, the optimization operation tactic in the dead zone and the qualification conditions are brought forward. The fast-opening system composed of 32 mm cartridge valves is taken as an example with use of the tactic. The simulation result shows that the maximum regulating time is shortened by 509 ms.
文摘This article take cold regions of nlral residential building envelope as the research object, suitability technical theory as the theoretical basis, we evaluation of rural residential energy envelope because China＇s rural areas is chmacterized by large regional differences and to find a solution for the envelope. It could be considered as the useful reference for retrofit design of similar projects.
文摘The paper use advantage of local natural resources, greening and sufficient water resources, combine natural ecological environment design with rural architecture, and fully consider local economic base and material technical conditions, and takes site selection and planning, architectural design technology as the two core aspects to study rural residential energy conservation, improving thermal environment of indoor residential that use of nature building energy saving technique, efforts to reduce the use of mechanical equipment system, thereby reducing the rural residential building energy consumption.
