针对全成形电脑横机高速准确的花型数据传输要求,设计一种采用分级控制的全成形电脑横机控制系统。该主系统采用STM32F407与Cyclone IV EP4CE30F23共同控制,子系统以FPGA架构建立,主子系统间通过FPGA建立并行总线。详细阐述高速通讯电...针对全成形电脑横机高速准确的花型数据传输要求,设计一种采用分级控制的全成形电脑横机控制系统。该主系统采用STM32F407与Cyclone IV EP4CE30F23共同控制,子系统以FPGA架构建立,主子系统间通过FPGA建立并行总线。详细阐述高速通讯电路的设计思路,包括LVDS接口设计、FIFO缓存区设计、LVDS传输的PCB设计等。仿真结果表明,该控制系统可实现花型数据大量、高速、准确的传输,并满足高速编织要求,为研发全成形电脑横机控制系统奠定基础。展开更多
The grey system theory, with the characteristics of fewer modeling data and higher accuracy, was employed to model the batch dyeing process for the purpose of accurate online control. The GM（1, 1） and GM （0, N） mo...The grey system theory, with the characteristics of fewer modeling data and higher accuracy, was employed to model the batch dyeing process for the purpose of accurate online control. The GM（1, 1） and GM （0, N） models of the grey system theory were discussed for their feasibilities of modding for batch dyeing process. The combination of direct dyestuff Fast Red F3B on cotton was chosen as a representative of the common dyeing method for describing the modeling process. Firstly, the GM（ 1, 1 ） model and the GM（1, 1） combined with GM（0, N） model were employed to model the equilibrium percentage of dyeing uptake rate. Secondly, an integrated dyeing uptake rate model with three factors （ temperature, salt concentration, and pH） was established based on the adsorption rate equation. Experimental results show that this model has higher accuracy and beetler generalization ability, which can predict the results of batch dyeing process. Due to the application of grey system theory, the model has a lot of advantages, such as being easy to determine the parameter value and small amount of calculation. So it can also be suitable for the same type of combination of dyestuff-fahric by changing the parameters value only.展开更多
Wood transportation begins from the landing or the forest road where the processed wood assortments are placed, they are loaded on trucks and then transported to the wood-working industry and/or the consumption center...Wood transportation begins from the landing or the forest road where the processed wood assortments are placed, they are loaded on trucks and then transported to the wood-working industry and/or the consumption centers. Wood transportation in Greece is carried out, almost exclusively, by trucks. The aim of this study is to analyze the evolution of timber trucking in Greece through the analysis of wood transportation waybills. A total of 1,471 waybills have been collected and analyzed that cover the period 1981-2008 from nine of the most productive and representative forest districts in Greece, in terms of timber production. The final dataset included information on the type and technical characteristics of truck types, the transported wood quantities and haulage distances. Furthermore, data on the wood transportation cost for the year 2010 have been collected and analyzed. According to the results, the number of two-axle trucks that dominated in the 1980s is reducing rapidly, mostly to the benefit of larger three-axle and four-axle trucks. More than three quarters （77%） of wood transportation is conducted in the period June-October. Mean vehicle load per vehicle type differs between conifer and broadleaved species from 7.1% up to 23.9%. Transportation of stacked wood with semitrailers is conducted with overloaded trucks, which could entail serious problems for public safety and the condition of road network. New design standards will enhance serviceability of the wood transportation routes and environmental protection.展开更多
文摘针对全成形电脑横机高速准确的花型数据传输要求,设计一种采用分级控制的全成形电脑横机控制系统。该主系统采用STM32F407与Cyclone IV EP4CE30F23共同控制,子系统以FPGA架构建立,主子系统间通过FPGA建立并行总线。详细阐述高速通讯电路的设计思路,包括LVDS接口设计、FIFO缓存区设计、LVDS传输的PCB设计等。仿真结果表明,该控制系统可实现花型数据大量、高速、准确的传输,并满足高速编织要求,为研发全成形电脑横机控制系统奠定基础。
基金National Natural Science Foundation of China(No.61074154)
文摘The grey system theory, with the characteristics of fewer modeling data and higher accuracy, was employed to model the batch dyeing process for the purpose of accurate online control. The GM（1, 1） and GM （0, N） models of the grey system theory were discussed for their feasibilities of modding for batch dyeing process. The combination of direct dyestuff Fast Red F3B on cotton was chosen as a representative of the common dyeing method for describing the modeling process. Firstly, the GM（ 1, 1 ） model and the GM（1, 1） combined with GM（0, N） model were employed to model the equilibrium percentage of dyeing uptake rate. Secondly, an integrated dyeing uptake rate model with three factors （ temperature, salt concentration, and pH） was established based on the adsorption rate equation. Experimental results show that this model has higher accuracy and beetler generalization ability, which can predict the results of batch dyeing process. Due to the application of grey system theory, the model has a lot of advantages, such as being easy to determine the parameter value and small amount of calculation. So it can also be suitable for the same type of combination of dyestuff-fahric by changing the parameters value only.
文摘Wood transportation begins from the landing or the forest road where the processed wood assortments are placed, they are loaded on trucks and then transported to the wood-working industry and/or the consumption centers. Wood transportation in Greece is carried out, almost exclusively, by trucks. The aim of this study is to analyze the evolution of timber trucking in Greece through the analysis of wood transportation waybills. A total of 1,471 waybills have been collected and analyzed that cover the period 1981-2008 from nine of the most productive and representative forest districts in Greece, in terms of timber production. The final dataset included information on the type and technical characteristics of truck types, the transported wood quantities and haulage distances. Furthermore, data on the wood transportation cost for the year 2010 have been collected and analyzed. According to the results, the number of two-axle trucks that dominated in the 1980s is reducing rapidly, mostly to the benefit of larger three-axle and four-axle trucks. More than three quarters （77%） of wood transportation is conducted in the period June-October. Mean vehicle load per vehicle type differs between conifer and broadleaved species from 7.1% up to 23.9%. Transportation of stacked wood with semitrailers is conducted with overloaded trucks, which could entail serious problems for public safety and the condition of road network. New design standards will enhance serviceability of the wood transportation routes and environmental protection.
