以联苯为原料,经傅克酰化、溴代、格氏和氧化反应,制备了4-(4-乙酰基苯基)苯甲酸;以苯甲醚为原料经傅克酰化,醚解制备了4-乙酰基苯酚;两者再经酯化、还原、脱水反应,合成了一种新型的双官能团聚合物材料单体4-(4-乙烯基)苯基苯甲酸-(4-...以联苯为原料,经傅克酰化、溴代、格氏和氧化反应,制备了4-(4-乙酰基苯基)苯甲酸;以苯甲醚为原料经傅克酰化,醚解制备了4-乙酰基苯酚;两者再经酯化、还原、脱水反应,合成了一种新型的双官能团聚合物材料单体4-(4-乙烯基)苯基苯甲酸-(4-乙烯基)苯酯,基于联苯的总收率为7%～10%,其结构经1 H NMR和FT-IR确认,并用偏光显微镜和差示扫描量热仪对其液晶性进行了研究。展开更多
Because of the toxic effects of plasticizers, mainly the phthalate DEHP, the Children＇s Hospital Kinderklinik Glanzing in Vienna, Austria started in 2000 replacing PVC-containing medical devices by PVC-free material....Because of the toxic effects of plasticizers, mainly the phthalate DEHP, the Children＇s Hospital Kinderklinik Glanzing in Vienna, Austria started in 2000 replacing PVC-containing medical devices by PVC-free material. After analysis of suspected PVC-containing medical products a PVC input-output balance was established. Through linkage with the consumption data PVC-containing articles could be identified. PVC-free alternatives for medical use were searched as well by literature research as by questioning the manufactures. Then medical producers were asked to confirm PVC free articles. PVC content of invasive medical products could be reduced from 343 kg and 14.6 % weight in 2001 to 178 kg and 7.6% weight in 2010.展开更多
Shirota's kinetic model and our kinetic model were used to treat the kinetic data of styrene (St) and N-phenylmaleimide (PMI) copolymerization in which charge-transfer complex (CTC) was formed. The results obtaine...Shirota's kinetic model and our kinetic model were used to treat the kinetic data of styrene (St) and N-phenylmaleimide (PMI) copolymerization in which charge-transfer complex (CTC) was formed. The results obtained by Shirota's kinetic model were disagreed with the experiments and the experimental phenomena could not be explained. The kinetic data of all feed fractions can be treated with our kinetic model, and the experimental phenomena can be explained from the propagation constants and reactivity ratios. Our kinetic model is also suitable for the kinetic data of methyl methacrylate (MMA) and PMI copolymerization in which CTC can not be formed.展开更多
Diblock copolymers containing polystyrene (PSt) andpolybutyl methacrylate (PBMA)segnents and random coplymer of styrene (St) and butyl methacrylate (BMA) havebeen prepared by atom transfer radical polymerizanon (ATRP)...Diblock copolymers containing polystyrene (PSt) andpolybutyl methacrylate (PBMA)segnents and random coplymer of styrene (St) and butyl methacrylate (BMA) havebeen prepared by atom transfer radical polymerizanon (ATRP). Diblock copolymers ofBAN and St with predetermined molecular weight (1× 104ed.5 × 104)and narrowermolecular weight distribution(1.25～1.5) were obained The random copolymercompositions were determined by 1HNMR spectroscopy and the reactivity ratios wereevaluated by the extended Kelen-Tudos method to be γst=0.91, γBMA=0.32.展开更多
Gamma-ray radiation has always been a convenient and effective way to modify the inter- facial properties in polymer blends. In this work, a small amount of trimethylolpropane triacrylate （TMPTA） was incorporated in...Gamma-ray radiation has always been a convenient and effective way to modify the inter- facial properties in polymer blends. In this work, a small amount of trimethylolpropane triacrylate （TMPTA） was incorporated into poly（ethylene terephthalate） （PET）/random terpolymer elastomer （ST2000） blends by melt-blending. The existence of TMPTA would induce the crosslinking of PET and ST2000 molecular chains at high temperatures of blend- ing, resulting in the improvement in the impact strength but the loss in the tensile strength. When the PET/ST2000 blends were irradiated by gamma-ray radiation, the integrated me- chanical properties could be enhanced significantly at a high absorbed dose. The irradiated sample at a dose of 100 kGy even couldn＇t be broken under the impact test load, and at the same time, has nearly no loss of tensile strength. Based on the analysis of the impact- fractured surface morphologies of the blends, it can be concluded that gamma-ray radiation at high absorbed dose can further in situ enhance the interfacial adhesion by promoting the crosslinking reactions of TMPTA and polymer chains. As a result, the toughness and strength of PET/ST2000 blend could be dramatically improved. This work provides a facial and practical way to the fabrication of polymer blends with high toughness and strength.展开更多
Amphiphilic graft copolymers are excellent additives for the development of antifouling membranes by nonsolvent induced phase separation. We report a convenient approach to the synthesis of novel graft copolymers with...Amphiphilic graft copolymers are excellent additives for the development of antifouling membranes by nonsolvent induced phase separation. We report a convenient approach to the synthesis of novel graft copolymers with hydrophobic polyacryloni- trile (PAN) backbones and hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA) side chains. Atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate was carried out with poly(acrylonitrile-co-p-chloromethyl styrene) (PAN-co-PCMS) as a macroinitiator in the presence of CuC1/2,2'-bipyridine at 50 ~C in dimethyl sulfoxide. Kinetics of the graft polymerization was also evaluated. The synthesis of poly(acrylonitrile-co-p-chloromethyl styrene-g-2-hydroxyethyl methacrylate) (PAN-co-(PCMS-g-PHEMA)) can be relatively controlled when CMS (the ATRP sites) unit in the macroinitia- tor is around 5 mol%. Both the macroinitiators and graft copolymers were characterized by FTIR, NMR and GPC. The surface morphology and wettability of the copolymer films were studied by AFM and water contact angle measurement, respectively. We demonstrate that phase segregation between the PAN-co-PCMS backbones and the PHEMA side chains takes place and the surface hydrophilicity of the graft copolymers increases with the length of the PHEMA side chains. Because these am- phiphilic graft copolymers can be synthesized in mass, they will be useful as latent additives for the fabrication of advanced PAN separation membranes.展开更多
文摘以联苯为原料,经傅克酰化、溴代、格氏和氧化反应,制备了4-(4-乙酰基苯基)苯甲酸;以苯甲醚为原料经傅克酰化,醚解制备了4-乙酰基苯酚;两者再经酯化、还原、脱水反应,合成了一种新型的双官能团聚合物材料单体4-(4-乙烯基)苯基苯甲酸-(4-乙烯基)苯酯,基于联苯的总收率为7%～10%,其结构经1 H NMR和FT-IR确认,并用偏光显微镜和差示扫描量热仪对其液晶性进行了研究。
文摘Because of the toxic effects of plasticizers, mainly the phthalate DEHP, the Children＇s Hospital Kinderklinik Glanzing in Vienna, Austria started in 2000 replacing PVC-containing medical devices by PVC-free material. After analysis of suspected PVC-containing medical products a PVC input-output balance was established. Through linkage with the consumption data PVC-containing articles could be identified. PVC-free alternatives for medical use were searched as well by literature research as by questioning the manufactures. Then medical producers were asked to confirm PVC free articles. PVC content of invasive medical products could be reduced from 343 kg and 14.6 % weight in 2001 to 178 kg and 7.6% weight in 2010.
基金Supported by the Doctoral Foundation of the Education Commission of China.
文摘Shirota's kinetic model and our kinetic model were used to treat the kinetic data of styrene (St) and N-phenylmaleimide (PMI) copolymerization in which charge-transfer complex (CTC) was formed. The results obtained by Shirota's kinetic model were disagreed with the experiments and the experimental phenomena could not be explained. The kinetic data of all feed fractions can be treated with our kinetic model, and the experimental phenomena can be explained from the propagation constants and reactivity ratios. Our kinetic model is also suitable for the kinetic data of methyl methacrylate (MMA) and PMI copolymerization in which CTC can not be formed.
文摘Diblock copolymers containing polystyrene (PSt) andpolybutyl methacrylate (PBMA)segnents and random coplymer of styrene (St) and butyl methacrylate (BMA) havebeen prepared by atom transfer radical polymerizanon (ATRP). Diblock copolymers ofBAN and St with predetermined molecular weight (1× 104ed.5 × 104)and narrowermolecular weight distribution(1.25～1.5) were obained The random copolymercompositions were determined by 1HNMR spectroscopy and the reactivity ratios wereevaluated by the extended Kelen-Tudos method to be γst=0.91, γBMA=0.32.
文摘Gamma-ray radiation has always been a convenient and effective way to modify the inter- facial properties in polymer blends. In this work, a small amount of trimethylolpropane triacrylate （TMPTA） was incorporated into poly（ethylene terephthalate） （PET）/random terpolymer elastomer （ST2000） blends by melt-blending. The existence of TMPTA would induce the crosslinking of PET and ST2000 molecular chains at high temperatures of blend- ing, resulting in the improvement in the impact strength but the loss in the tensile strength. When the PET/ST2000 blends were irradiated by gamma-ray radiation, the integrated me- chanical properties could be enhanced significantly at a high absorbed dose. The irradiated sample at a dose of 100 kGy even couldn＇t be broken under the impact test load, and at the same time, has nearly no loss of tensile strength. Based on the analysis of the impact- fractured surface morphologies of the blends, it can be concluded that gamma-ray radiation at high absorbed dose can further in situ enhance the interfacial adhesion by promoting the crosslinking reactions of TMPTA and polymer chains. As a result, the toughness and strength of PET/ST2000 blend could be dramatically improved. This work provides a facial and practical way to the fabrication of polymer blends with high toughness and strength.
基金supported by the National Natural Science Foundation of China (21174124)
文摘Amphiphilic graft copolymers are excellent additives for the development of antifouling membranes by nonsolvent induced phase separation. We report a convenient approach to the synthesis of novel graft copolymers with hydrophobic polyacryloni- trile (PAN) backbones and hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA) side chains. Atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate was carried out with poly(acrylonitrile-co-p-chloromethyl styrene) (PAN-co-PCMS) as a macroinitiator in the presence of CuC1/2,2'-bipyridine at 50 ~C in dimethyl sulfoxide. Kinetics of the graft polymerization was also evaluated. The synthesis of poly(acrylonitrile-co-p-chloromethyl styrene-g-2-hydroxyethyl methacrylate) (PAN-co-(PCMS-g-PHEMA)) can be relatively controlled when CMS (the ATRP sites) unit in the macroinitia- tor is around 5 mol%. Both the macroinitiators and graft copolymers were characterized by FTIR, NMR and GPC. The surface morphology and wettability of the copolymer films were studied by AFM and water contact angle measurement, respectively. We demonstrate that phase segregation between the PAN-co-PCMS backbones and the PHEMA side chains takes place and the surface hydrophilicity of the graft copolymers increases with the length of the PHEMA side chains. Because these am- phiphilic graft copolymers can be synthesized in mass, they will be useful as latent additives for the fabrication of advanced PAN separation membranes.
