期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
生物活性碳纤维处理苯酚模拟废水的研究 被引量:3
1
作者 蔡巧巧 胡中华 《高科技纤维与应用》 CAS 2006年第5期15-18,共4页
实验以预处理和改性的活性碳纤维(AC F)为载体,经菌种筛选、驯化和生物循环挂膜,形成生物活性碳纤维(BAC F),然后将苯酚模拟废水通过BACF柱,检测了BACF去除苯酚模拟废水的性能。实验结果表明,在水样温度为1 6~20℃,pH为6.5左右,碳床接... 实验以预处理和改性的活性碳纤维(AC F)为载体,经菌种筛选、驯化和生物循环挂膜,形成生物活性碳纤维(BAC F),然后将苯酚模拟废水通过BACF柱,检测了BACF去除苯酚模拟废水的性能。实验结果表明,在水样温度为1 6~20℃,pH为6.5左右,碳床接触时间为30 min时,水样流速为4.2 ml/mi n,BACF对苯酚模拟废水的平均去除率高达为97.5%,表明BACF技术对苯酚废水有优异的处理效果,并且出水水质稳定,处理量大。因此作为一种新型的苯酚废水处理技术,BACF技术将具有广阔的应用前景。 展开更多
关键词 生物活性碳纤维 苯酚模拟废水 水处理
下载PDF
含酚模拟废水电催化氧化实验研究 被引量:4
2
作者 钟耀 王建中 +2 位作者 娄红波 张萍 沙净 《节水灌溉》 北大核心 2008年第9期18-20,共3页
电催化氧化法因其特有的优点,现已成为水处理领域研究的热点。实验采用自制实验装置,用电池中碳棒为电极,对含酚模拟废水进行电催化氧化处理。着重考察溶液温度、电解时间、电解质浓度、电压、溶液pH值等影响因素在电解过程中对苯酚... 电催化氧化法因其特有的优点,现已成为水处理领域研究的热点。实验采用自制实验装置,用电池中碳棒为电极,对含酚模拟废水进行电催化氧化处理。着重考察溶液温度、电解时间、电解质浓度、电压、溶液pH值等影响因素在电解过程中对苯酚去除率的影响,并分析其原因。实验表明:在常温、电压为5.5V、电解质(Na2SO4)浓度为20.0g/L、pH值为8.0~9.0、电解120min时,苯酚去除率接近100.0%。因此电催化氧化法作为一种高效、简便的废水处理技术具有一定的应用潜力。 展开更多
关键词 电催化氧化 苯酚模拟废水 去除率 电解质
下载PDF
Easy removing of phenol from wastewater using vegetable oil-based organic solvent in emulsion liquid membrane process 被引量:4
3
作者 Norasikin Othman Norul Fatiha Mohamed Noah +4 位作者 Lim Yin Shu Zing-Yi Ooi Norela Jusoh Mariani Idroas Masahiro Goto 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2017年第1期45-52,共8页
Phenol is considered as pollutant due to its toxicity and carcinogenic effect.Thus,variety of innovative methods for separation and recovery of phenolic compounds is developed in order to remove the unwanted phenol fr... Phenol is considered as pollutant due to its toxicity and carcinogenic effect.Thus,variety of innovative methods for separation and recovery of phenolic compounds is developed in order to remove the unwanted phenol from wastewater and obtain valuable phenolic compound.One of potential method is extraction using green based liquid organic solvent.Therefore,the feasibility of using palm oil was investigated.In this research,palm oil based organic phase was used as diluents to treat a simulated wastewater containing 300×10^(-6) of phenol solution using emulsion liquid membrane process(ELM).The stability of water-in-oil(W/O) emulsion on diluent composition and the parameters affecting the phenol removal efficiency and stability of the emulsion;such as emulsification speed,emulsification time,agitation speed,surfactant concentration,pH of external phase,contact time,stripping agent concentration and treat ratio were carried out.The results of ELM study showed that at ratio7 to 3 of palm oil to kerosene,5 min and 1300 r·min^(-1) of emulsification process the stabile primary emulsion were formed.Also,no carrier is needed to facilitate the phenol extraction.In experimental conditions of500 r·min^(-1) of agitation speed,3%Span 80,pH 8 of external phase,5 min of contact time,0.1 mol·L^(-1) NaOH as stripping agent and 1:10 of treat ratio,the ELM process was very promising for removing the phenol from the wastewater.The extraction performance at about 83%of phenol was removed for simulated wastewater and an enrichment of phenol in recovery phase as phenolate compound was around 11 times. 展开更多
关键词 Vegetable palm oil-based Liquid membrane Phenol removal Wastewater
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部