A binary alloy consisting of poly（phenylene-sulfide） （PPS）/poly（ethylene terephthalate-co-l,4- cyclohexanedimethanol） （PETG） was prepared by the melt blending technology using a twin-screw extruder. The morpho...A binary alloy consisting of poly（phenylene-sulfide） （PPS）/poly（ethylene terephthalate-co-l,4- cyclohexanedimethanol） （PETG） was prepared by the melt blending technology using a twin-screw extruder. The morphology and crystallization behavior of the alloy material were investigated by means of SEM, POM and DSC. The SEM study of the alloy samples revealed that PPS and PETG comprised an incompatible system and the interface structure of two phases could be observed distinctly when the composition of the binary alloy was being changed. The POM results had revealed that incorporation of PETG into PPS could lead to formation of larger spherulite crystals in the course of PPS crystallization, but small and grainy spherulite crystals appeared with further increase in the PETG concentration. The DSC analyses revealed that addition of PETG to the alloy composition could shift the PPS crystallization temperature towards the high-temperature region.展开更多
Binary alloy samples consisting of poly（phenylene sulfide） （PPS）/poly（ethylene terephthalate-co-cyclohexane 1,4-dimethanol terephthalate） （PETG） blend were prepared by the melt blending technology using a twin...Binary alloy samples consisting of poly（phenylene sulfide） （PPS）/poly（ethylene terephthalate-co-cyclohexane 1,4-dimethanol terephthalate） （PETG） blend were prepared by the melt blending technology using a twin-screw extruder. The nonisothermal crystallization kinetics of binary alloys made of poly（phenylene sulfide） （PPS） and poly（ethyleneco-cyclohexane 1,4-dimethanol terephthalate） （PETG） was studied by the differential scanning calorimetry （DSC） at different cooling rates. The test results revealed that the addition of PETG could shift the crystallization temperature of PPS toward the high-temperature direction. The nonisothermal crystallization kinetic parameters of the PPS/PETG alloy samples were calculated by the methods proposed by Avrami and Mo. Test results demonstrated that the PPS/PETG alloy could give birth to apparent secondary crystallization. The value of Avrami exponent was lower relatively, while Mo＇s method was more suited to the nonisothermal crystallization process of the PPS/PETG alloy.展开更多
Experimental data on density and viscosity at 303.15K and 323.15K are presented for the binary mixtures of p-xylene with cyclohexane, n-heptane, n-octane, sulfolane, N-methyl-2-pyrrolidone and acetic acid.From these d...Experimental data on density and viscosity at 303.15K and 323.15K are presented for the binary mixtures of p-xylene with cyclohexane, n-heptane, n-octane, sulfolane, N-methyl-2-pyrrolidone and acetic acid.From these data, the excess molar volume and deviations in viscosity have been calculated. The computed quantities have been fitted to the Redlich-Kister Equation to derive coefficients and estimate the standard error values. Results are discussed in terms of intermolecular interactions.展开更多
文摘A binary alloy consisting of poly（phenylene-sulfide） （PPS）/poly（ethylene terephthalate-co-l,4- cyclohexanedimethanol） （PETG） was prepared by the melt blending technology using a twin-screw extruder. The morphology and crystallization behavior of the alloy material were investigated by means of SEM, POM and DSC. The SEM study of the alloy samples revealed that PPS and PETG comprised an incompatible system and the interface structure of two phases could be observed distinctly when the composition of the binary alloy was being changed. The POM results had revealed that incorporation of PETG into PPS could lead to formation of larger spherulite crystals in the course of PPS crystallization, but small and grainy spherulite crystals appeared with further increase in the PETG concentration. The DSC analyses revealed that addition of PETG to the alloy composition could shift the PPS crystallization temperature towards the high-temperature region.
文摘Binary alloy samples consisting of poly（phenylene sulfide） （PPS）/poly（ethylene terephthalate-co-cyclohexane 1,4-dimethanol terephthalate） （PETG） blend were prepared by the melt blending technology using a twin-screw extruder. The nonisothermal crystallization kinetics of binary alloys made of poly（phenylene sulfide） （PPS） and poly（ethyleneco-cyclohexane 1,4-dimethanol terephthalate） （PETG） was studied by the differential scanning calorimetry （DSC） at different cooling rates. The test results revealed that the addition of PETG could shift the crystallization temperature of PPS toward the high-temperature direction. The nonisothermal crystallization kinetic parameters of the PPS/PETG alloy samples were calculated by the methods proposed by Avrami and Mo. Test results demonstrated that the PPS/PETG alloy could give birth to apparent secondary crystallization. The value of Avrami exponent was lower relatively, while Mo＇s method was more suited to the nonisothermal crystallization process of the PPS/PETG alloy.
文摘Experimental data on density and viscosity at 303.15K and 323.15K are presented for the binary mixtures of p-xylene with cyclohexane, n-heptane, n-octane, sulfolane, N-methyl-2-pyrrolidone and acetic acid.From these data, the excess molar volume and deviations in viscosity have been calculated. The computed quantities have been fitted to the Redlich-Kister Equation to derive coefficients and estimate the standard error values. Results are discussed in terms of intermolecular interactions.
