Tensile properties of as-deformed 2A50 aluminum alloy were investigated in the high temperature solid and semi-solid states. The results show that temperature has almost no effect on the maximum tensile stress between...Tensile properties of as-deformed 2A50 aluminum alloy were investigated in the high temperature solid and semi-solid states. The results show that temperature has almost no effect on the maximum tensile stress between 500 ℃ and 530 ℃, and the maximum tensile stress decreases rapidly when the temperature is above 532 ℃. The ductility decreases with increasing temperature and has an obvious fall when the temperature is above solidus temperature. This alloy almost has no ductility above 537 ℃, and cannot sustain tensile stress above 550℃. A brittle temperature range in which this alloy is prone to form microcracks was derived. The relation between microstructure, fraction solid and tensile properties were also investigated by examining the metallograph and fracture surface morphology of tested specimens, which could provide reference for forecasting the microcracks in this alloy occurring in semi-solid processing.展开更多
Deformation of ductile cuttings from sandstone in the mechanical compaction process was designed through the "experimental system of triaxial rock deformation",and the influence on porosity was studied by lo...Deformation of ductile cuttings from sandstone in the mechanical compaction process was designed through the "experimental system of triaxial rock deformation",and the influence on porosity was studied by looking into the deformation characteristics of ductile cuttings. The design indexes are as follows: simulated depth 0- 4 000 m,interval depth 500 m,and pressure range 0- 120 MPa at interval of 1. 5 MPa. The experimental results show that the porosity decreases as buried depth increases,indicating a negative relationship between them. The amount of compression was mainly obtained by porosity reduction and cutting deformation. Deformation of ductile cuttings is mainly ductile deformation; and deformation of crystal fragments is mainly expressed as brittle fracture,resulting in decrease of particle size. The research is of certain value for the exploration and development of oil and gas.展开更多
We revisit quantum gravitational contributions to quantum gauge field theories in the gauge condition independent Vilkovisky-DeWitt formalism based on the background field method.With the advantage of Landau-DeWitt ga...We revisit quantum gravitational contributions to quantum gauge field theories in the gauge condition independent Vilkovisky-DeWitt formalism based on the background field method.With the advantage of Landau-DeWitt gauge,we explicitly obtain the gauge condition independent result for the quadratically divergent gravitational corrections to gauge couplings.By employing,in a general way,a scheme-independent regularization method that can preserve both gauge invariance and original divergent behavior of integrals,we show that the resulting gauge coupling is power-law running and asymptotically free.The regularization scheme dependence is clarified by comparing with results obtained by other methods.The loop regularization scheme is found to be applicable for a consistent calculation.展开更多
基金Projects(50774026, 50875059) supported by the National Natural Science Foundation of ChinaProject(20070420023) supported by the China Postdoctoral Science FoundationProject(2008AA03A239) supported by the National High-tech Research and Development Program of China
文摘Tensile properties of as-deformed 2A50 aluminum alloy were investigated in the high temperature solid and semi-solid states. The results show that temperature has almost no effect on the maximum tensile stress between 500 ℃ and 530 ℃, and the maximum tensile stress decreases rapidly when the temperature is above 532 ℃. The ductility decreases with increasing temperature and has an obvious fall when the temperature is above solidus temperature. This alloy almost has no ductility above 537 ℃, and cannot sustain tensile stress above 550℃. A brittle temperature range in which this alloy is prone to form microcracks was derived. The relation between microstructure, fraction solid and tensile properties were also investigated by examining the metallograph and fracture surface morphology of tested specimens, which could provide reference for forecasting the microcracks in this alloy occurring in semi-solid processing.
基金Supported by joint project of CNOOC with Jilin University(No.CCL2012TJXSBS0282)
文摘Deformation of ductile cuttings from sandstone in the mechanical compaction process was designed through the "experimental system of triaxial rock deformation",and the influence on porosity was studied by looking into the deformation characteristics of ductile cuttings. The design indexes are as follows: simulated depth 0- 4 000 m,interval depth 500 m,and pressure range 0- 120 MPa at interval of 1. 5 MPa. The experimental results show that the porosity decreases as buried depth increases,indicating a negative relationship between them. The amount of compression was mainly obtained by porosity reduction and cutting deformation. Deformation of ductile cuttings is mainly ductile deformation; and deformation of crystal fragments is mainly expressed as brittle fracture,resulting in decrease of particle size. The research is of certain value for the exploration and development of oil and gas.
基金Supported in part by the National Science Foundation of China under Grant Nos. 10821504,10975170the Key Project of Knowledge Innovation Program of Chinese Academy of Science
文摘We revisit quantum gravitational contributions to quantum gauge field theories in the gauge condition independent Vilkovisky-DeWitt formalism based on the background field method.With the advantage of Landau-DeWitt gauge,we explicitly obtain the gauge condition independent result for the quadratically divergent gravitational corrections to gauge couplings.By employing,in a general way,a scheme-independent regularization method that can preserve both gauge invariance and original divergent behavior of integrals,we show that the resulting gauge coupling is power-law running and asymptotically free.The regularization scheme dependence is clarified by comparing with results obtained by other methods.The loop regularization scheme is found to be applicable for a consistent calculation.
