The property of the contact surface between geosynthetics and soil directly affects the whole structure＇s stability. The interface property is one of the most important indices for the reinforced structure. Systemati...The property of the contact surface between geosynthetics and soil directly affects the whole structure＇s stability. The interface property is one of the most important indices for the reinforced structure. Systematic direct-shear tests with large direct-shear apparatus are carded out for geobelt reinforced clay under different normal stresses and water content. A reinforcement-sand-clay layer system improving the interface behavior greatly is designed. The stress-strain relationship is investigated on the basis of the experimental results. The results show that with the increase of the normal stress, the shear strength between the clay and the reinforcement increases nonlinearly, and with the increase of the water content, the friction coefficient between the clay and the reinforcement decreases dramatically and the cohesion between the clay and the polypropylene geobelt increases initially, then decreases. There is an optimal value for the water content between the clay and the polypropylene geobelt, which is 2% lower than the optimal water content of clay compaction. This reinforcement-sand-clay layer system improves the shear strength of the interface remarkably. Therefore, the clay-sand-reinforcement layer system is a rather good design for practical use in reinforcement engineering.展开更多
This paper aims to present a theoretical method to study the bearing performance of vertically loaded large-diameter pipe pile groups.The interactions between group piles result in different bearing performance of bot...This paper aims to present a theoretical method to study the bearing performance of vertically loaded large-diameter pipe pile groups.The interactions between group piles result in different bearing performance of both a single pile and pile groups.Considering the pile group effect and the skin friction from both outer and inner soils,an analytical solution is developed to calculate the settlement and axial force in large-diameter pipe pile groups.The analytical solution was verified by centrifuge and field testing results.An extensive parametric analysis was performed to study the bearing performance of the pipe pile groups.The results reveal that the axial forces in group piles are not the same.The larger the distance from central pile,the larger the axial force.The axial force in the central pile is the smallest,while that in corner piles is the largest.The axial force on the top of the corner piles decreases while that in the central pile increases with increasing of pile spacing and decreasing of pile length.The axial force in side piles varies little with the variations of pile spacing,pile length,and shear modulus of the soil and is approximately equal to the average load shared by one pile.For a pile group,the larger the pile length is,the larger the influence radius is.As a result,the pile group effect is more apparent for a larger pile length.The settlement of pile groups decreases with increasing of the pile number in the group and the shear modulus of the underlying soil.展开更多
The objective of this study was to investigate the effect of moisture content, size and loading orientation on mechanical properties such as force, deformation and energy absorbed per unit volume for fracturing Irania...The objective of this study was to investigate the effect of moisture content, size and loading orientation on mechanical properties such as force, deformation and energy absorbed per unit volume for fracturing Iranian sunflower seed and its kernel （Azargol as a case study） under quasi-static loading. Sunflower seeds and their kernels were quasi-statically loaded in horizontal and vertical orientations with moisture content in three levels： 3%, 7% and 14%, and size category in three levels： small, medium and large. The obtained results showed that rupture force for both sunflower seed and its kernel decreased with increasing moisture content while the absorbed energy and deformation at rupture point increased for all size categories in both horizontal and vertical loading orientations. Also, seeds in the vertical orientation developed hull cracks at a higher level of force than those loaded in the horizontal orientation. However, for the kernels it was the opposite. In addition, the average forces required to cause kernel rupture were lower （11.64-39.9 N） than those required to rupture the seed （30.06-117.46 N） in both orientations. Seeds loaded in a vertical orientation absorbed more energy （87.67 mJ） prior to rupture than those loaded in the horizontal （46.60 mJ） orientation. However, for the kernels it was the opposite.展开更多
In order to investigate the energy absorption characteristics of multi-cell polygonal tubes with different cross-sectional configurations,firstly,the theoretical formulae of the mean crushing force under axial load fo...In order to investigate the energy absorption characteristics of multi-cell polygonal tubes with different cross-sectional configurations,firstly,the theoretical formulae of the mean crushing force under axial load for four multi-cell polygonal tubes were derived by combining the Super Folding Element theory with Zhang’s research results.These formulae can be used to validate the numerical model and quickly evaluate the energy absorption ability of multi-cell polygonal tubes.Furthermore,a comparative study on the energy absorption performance of eight multi-cell polygonal tubes under axial and oblique loads was conducted.The results show that all tubes have a stable mixed deformation mode under axial load.The multi-cell decagon tube has better energy-absorption ability compared with other tubes.Whenθis less than 10°,all the tubes maintain a stable deformation mode,and the multi-cell decagon tube also has the biggest crushing force efficiency and specific energy absorption among these eight tubes;meanwhile compared with the results atθ=0°,the specific energy absorption of all tubes decreases by about 8%-21%,while the crushing force efficiency increases by 20%-56%.However,at large angles 20°and 30°,all of the tubes collapse in bending modes and lose their effectiveness at energy absorption.展开更多
文摘The property of the contact surface between geosynthetics and soil directly affects the whole structure＇s stability. The interface property is one of the most important indices for the reinforced structure. Systematic direct-shear tests with large direct-shear apparatus are carded out for geobelt reinforced clay under different normal stresses and water content. A reinforcement-sand-clay layer system improving the interface behavior greatly is designed. The stress-strain relationship is investigated on the basis of the experimental results. The results show that with the increase of the normal stress, the shear strength between the clay and the reinforcement increases nonlinearly, and with the increase of the water content, the friction coefficient between the clay and the reinforcement decreases dramatically and the cohesion between the clay and the polypropylene geobelt increases initially, then decreases. There is an optimal value for the water content between the clay and the polypropylene geobelt, which is 2% lower than the optimal water content of clay compaction. This reinforcement-sand-clay layer system improves the shear strength of the interface remarkably. Therefore, the clay-sand-reinforcement layer system is a rather good design for practical use in reinforcement engineering.
基金supported by the Joint High Speed Railway Key Program of National Natural Science Foundation of China (Grant No.U1134207)the National Natural Science Foundation of China (Grant No.51378177)+1 种基金the Program for Excellent University Talents in New Century (Grant No.NCET-12-0843)the Fundamental Research Fund for the Central Universities (Grant No.106112014CDJZR200007)
文摘This paper aims to present a theoretical method to study the bearing performance of vertically loaded large-diameter pipe pile groups.The interactions between group piles result in different bearing performance of both a single pile and pile groups.Considering the pile group effect and the skin friction from both outer and inner soils,an analytical solution is developed to calculate the settlement and axial force in large-diameter pipe pile groups.The analytical solution was verified by centrifuge and field testing results.An extensive parametric analysis was performed to study the bearing performance of the pipe pile groups.The results reveal that the axial forces in group piles are not the same.The larger the distance from central pile,the larger the axial force.The axial force in the central pile is the smallest,while that in corner piles is the largest.The axial force on the top of the corner piles decreases while that in the central pile increases with increasing of pile spacing and decreasing of pile length.The axial force in side piles varies little with the variations of pile spacing,pile length,and shear modulus of the soil and is approximately equal to the average load shared by one pile.For a pile group,the larger the pile length is,the larger the influence radius is.As a result,the pile group effect is more apparent for a larger pile length.The settlement of pile groups decreases with increasing of the pile number in the group and the shear modulus of the underlying soil.
文摘The objective of this study was to investigate the effect of moisture content, size and loading orientation on mechanical properties such as force, deformation and energy absorbed per unit volume for fracturing Iranian sunflower seed and its kernel （Azargol as a case study） under quasi-static loading. Sunflower seeds and their kernels were quasi-statically loaded in horizontal and vertical orientations with moisture content in three levels： 3%, 7% and 14%, and size category in three levels： small, medium and large. The obtained results showed that rupture force for both sunflower seed and its kernel decreased with increasing moisture content while the absorbed energy and deformation at rupture point increased for all size categories in both horizontal and vertical loading orientations. Also, seeds in the vertical orientation developed hull cracks at a higher level of force than those loaded in the horizontal orientation. However, for the kernels it was the opposite. In addition, the average forces required to cause kernel rupture were lower （11.64-39.9 N） than those required to rupture the seed （30.06-117.46 N） in both orientations. Seeds loaded in a vertical orientation absorbed more energy （87.67 mJ） prior to rupture than those loaded in the horizontal （46.60 mJ） orientation. However, for the kernels it was the opposite.
基金Projects(U1334208,51405516,51275532)supported by the National Natural Science Foundation of ChinaProjects(2015zzts210,2016zzts331)supported by the Fundamental Research Funds for the Central Universities,China
文摘In order to investigate the energy absorption characteristics of multi-cell polygonal tubes with different cross-sectional configurations,firstly,the theoretical formulae of the mean crushing force under axial load for four multi-cell polygonal tubes were derived by combining the Super Folding Element theory with Zhang’s research results.These formulae can be used to validate the numerical model and quickly evaluate the energy absorption ability of multi-cell polygonal tubes.Furthermore,a comparative study on the energy absorption performance of eight multi-cell polygonal tubes under axial and oblique loads was conducted.The results show that all tubes have a stable mixed deformation mode under axial load.The multi-cell decagon tube has better energy-absorption ability compared with other tubes.Whenθis less than 10°,all the tubes maintain a stable deformation mode,and the multi-cell decagon tube also has the biggest crushing force efficiency and specific energy absorption among these eight tubes;meanwhile compared with the results atθ=0°,the specific energy absorption of all tubes decreases by about 8%-21%,while the crushing force efficiency increases by 20%-56%.However,at large angles 20°and 30°,all of the tubes collapse in bending modes and lose their effectiveness at energy absorption.
