期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
大豆异黄酮超临界流体萃取工艺与动力学模型 被引量:8
1
作者 潘利华 罗建平 《农业机械学报》 EI CAS CSCD 北大核心 2010年第6期137-141,共5页
通过单因素和L9(34)正交试验确定了超临界流体萃取大豆异黄酮最佳萃取条件为:CO2流量8 L/h,静萃取120m in,动萃取60min,每克脱脂豆粕的乙醇用量3mL,萃取温度55℃,萃取压力30MPa。借鉴固定床层吸附/脱附理论建立了萃取动力学模型,并采用B... 通过单因素和L9(34)正交试验确定了超临界流体萃取大豆异黄酮最佳萃取条件为:CO2流量8 L/h,静萃取120m in,动萃取60min,每克脱脂豆粕的乙醇用量3mL,萃取温度55℃,萃取压力30MPa。借鉴固定床层吸附/脱附理论建立了萃取动力学模型,并采用BP神经网络和试差法确定了模型参数kLa,确定参数后的动力学模型较为精确地定量描述了萃取床层的溶质分布。 展开更多
关键词 超临界流体 大豆异黄酮 工艺 染料木苷 萃取动力学模型 神经网络
下载PDF
超临界二氧化碳流体萃取大黄蒽醌动力学模型 被引量:3
2
作者 未作君 刘迎新 倪晋仁 《化工学报》 EI CAS CSCD 北大核心 2006年第3期582-589,共8页
通过对萃取固定床层进行质量衡算建立了超临界CO2流体萃取动力学模型.然后采用BP神经网络拟合实验条件下的萃取动力学曲线,并将之与动力学模型试差法求解所得的萃出曲线进行对照确定模型参数kLa.结果表明,BP神经网络能很好地模拟大黄蒽... 通过对萃取固定床层进行质量衡算建立了超临界CO2流体萃取动力学模型.然后采用BP神经网络拟合实验条件下的萃取动力学曲线,并将之与动力学模型试差法求解所得的萃出曲线进行对照确定模型参数kLa.结果表明,BP神经网络能很好地模拟大黄蒽醌的萃取动力学曲线,网络训练误差和预测误差分别为1.5%和3.5%.确定参数后的动力学模型可用于对萃取床层作较为精确的定量描述:模拟所得萃取穿透曲线与大黄蒽醌萃取实验结果相比AARD误差在10%左右.与前人模型相比,该模型具有精度好,获取参数时的实验条件相对宽松等优点. 展开更多
关键词 超临界二氧化碳流体 大黄蒽醌 萃取动力学模型 神经网络
下载PDF
超临界流体萃取模型在土壤修复中的应用
3
作者 江明华 王卫京 +1 位作者 徐继润 戴秀雯 《大连大学学报》 2014年第3期68-72,共5页
针对超临界流体萃取土壤污染物的传质过程数据的缺失,分析了当前超临界流体萃取模型的优缺点,并在超临界流体萃取土壤污染物的过程是内扩散控制过程的基础之上,建立起基于微分床单元的质量守恒模型,再对模型进行求解与分析从而来模拟超... 针对超临界流体萃取土壤污染物的传质过程数据的缺失,分析了当前超临界流体萃取模型的优缺点,并在超临界流体萃取土壤污染物的过程是内扩散控制过程的基础之上,建立起基于微分床单元的质量守恒模型,再对模型进行求解与分析从而来模拟超临界流体萃取土壤污染物的传质过程。 展开更多
关键词 土壤修复 超临界流体 超临界CO2 萃取动力学模型
下载PDF
Kinetics of cerium(Ⅳ) and fluoride extraction from sulfuric solutions using bifunctional ionic liquid extractant(Bif-ILE)[A336][P204] 被引量:7
4
作者 杨华玲 陈继 +3 位作者 张冬丽 王威 崔红敏 刘郁 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2014年第6期1937-1945,共9页
The extraction kinetics of Ce(Ⅳ) and Ce(Ⅳ)-F^- mixture systems from sulfuric solutions to n-heptane solution containing Bif-ILE[A336][P204]([trialkylmethylammonium][di-2-ethylhewanxylphosphinate]) with a const... The extraction kinetics of Ce(Ⅳ) and Ce(Ⅳ)-F^- mixture systems from sulfuric solutions to n-heptane solution containing Bif-ILE[A336][P204]([trialkylmethylammonium][di-2-ethylhewanxylphosphinate]) with a constant interfacial area cell with laminar flow were studied,just to elucidate the extraction mechanism and the mass transfer models.The data were analyzed in terms of pseudo-first-order constants.The effects of stirring speed,specific interfacial area and temperature on the extraction rate in both systems were discussed,suggesting that the extractions were mixed bulk phases-interfacial control process.Supported by the experimental data,the corresponding rate equations for Ce(Ⅳ) extraction system and Ce(Ⅳ)-F^- mixture extraction system were obtained.The experimental results indicated the rate-controlling step.The kinetics model was deduced from the rate-controlling step and consistent with the rate equation. 展开更多
关键词 Ce(Ⅳ)-F--system Bif-ILE kinetics model extraction kinetics constant interfacial area cell with laminar flow
下载PDF
Dissolution kinetics of copper from multi-metal copper alloy roasted in oxygen
5
作者 卢伟红 尹周澜 +1 位作者 丁治英 刘洋 《Journal of Central South University》 SCIE EI CAS CSCD 2017年第2期335-340,共6页
A kinetic study on the sulfuric acid leaching of multi-metal oxide, which is the product of multi-metal copper alloy with iron trioxide roasted in oxygen, was carried out. The effects of leaching time, stirring speed,... A kinetic study on the sulfuric acid leaching of multi-metal oxide, which is the product of multi-metal copper alloy with iron trioxide roasted in oxygen, was carried out. The effects of leaching time, stirring speed, sulfuric acid concentration, reaction temperature, and particle size of the multi-metal oxide on the kinetics and mechanism of copper extraction were studied. It was found that the reaction kinetic model about the copper extraction from multi-metal oxide follows the mixed kinetic shrinking core mode: 1/31n(1-X)+(1-X)-l/3-1=680.5C(H2SO4)0.4297dp0.75115exp(-Ea/RT)t. 展开更多
关键词 leaching kinetic multi-metal copper alloy ROASTING
下载PDF
Study on Kinetics for Desulfurization of Model Diesel 被引量:2
6
作者 Qian Jianhua Zhou Yuenan +3 位作者 Liu Lin Wang Yue Xing Jinjuan Lü Hong 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS 2009年第2期43-47,共5页
In this study,by means of the experiments for desulfurization of model diesel through oxidative extraction,the changes associated with the rate of desulfurization of diesel and the mechanism for oxidation of sulfides ... In this study,by means of the experiments for desulfurization of model diesel through oxidative extraction,the changes associated with the rate of desulfurization of diesel and the mechanism for oxidation of sulfides in diesel were explored. Through studying the mechanism for oxidation of sulfides and the principle of solvent extraction,the kinetic equation of desulfurization via oxidative extraction were determined. By means of the evaluation of model parameters and curve fitting,the reaction order between organic sulfide and sulfone,the intrinsic oxidation rate constant of organic sulfide and sulfone,and the equilibrium constant between sulfone in model diesel and extractive solvent were determined. The experimental values of the desulfurization rate and the theoretical values of the corresponding model equation had closely demonstrated that the desulfurization reaction rate had high accuracy. And the reaction kinetics could provide an important basis for diesel desulfurization process in the future. 展开更多
关键词 oxidative desulfurization kinetic equation curve fitting equilibrium constant
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部