As for drying the thick timber of Schima superba, the drying time is longer while using a normal temperature drying technology. By means of organically combining normal temperature drying with normal pressure superhea...As for drying the thick timber of Schima superba, the drying time is longer while using a normal temperature drying technology. By means of organically combining normal temperature drying with normal pressure superheated steam drying, not only could the drying time be reduce but drying quality was improved by the new technology. The key technology is controling temperature and humidity appropriately when drying technology was changed from normal pressure superheated steam to normal temperature.展开更多
The precision of atmospheric dry delay model is closely correlated with the accuracy of GPS water vapor in the process of GPS (Global Position System) remote sensing. Radiosonde data (from 1996 to 2001) at Qingyuan ar...The precision of atmospheric dry delay model is closely correlated with the accuracy of GPS water vapor in the process of GPS (Global Position System) remote sensing. Radiosonde data (from 1996 to 2001) at Qingyuan are used to calculate the exact values of the atmospheric dry delay. Base on these calculations and the surface meteorological parameters, the local year and month correction models of dry delay at the zenith angle of 0° are established by statistical methods. The analysis result shows that the local model works better and is slight more sensitive to altitude angle than universal models and that it is not necessary to build models for each month due to the slight difference between year model and month model. Furthermore, when the altitude angle is less than 75°, the difference between curve path and straight path increases rapidly with altitude angle’s decrease.展开更多
In kiln drying of softwood timber, external heat and moisture mass transfercoefficients are important in defining boundary temperature and moisture content at the woodsurface. In addition, superheated steam drying of ...In kiln drying of softwood timber, external heat and moisture mass transfercoefficients are important in defining boundary temperature and moisture content at the woodsurface. In addition, superheated steam drying of wood is a promising technology but this has notbeen widely accepted commercially, partially due to the lack of understanding of the dryingphenomena occurred during drying. In this work, experimental investigation was performed to quantifythe heat transfer between wood surface and surrounding moist air or superheated steam. In theexperiment, saturated radiata pine sapwood samples were dried using dry-bulb/wet-bulb temperaturesof 60℃/50℃, 90℃/60℃, 120℃/70℃, 140℃/90℃, 160℃/90℃, 140℃/100℃ and 160℃/100℃. The lasttwo schedules were for superheated steam drying as the wet-bulb temperature was set at 100℃. Thecirculation velocity over the board surface was controlled at 4.2m·s^(-1). Two additional runs(90℃/60℃) using air velocities of 2.4 m·s^(-1) and 4.8 m·s^(-1) were performed to check theeffect of the circulation velocity. During drying, sample weight and temperatures at wood surfaceand different depths were continuously measured. Prom these measurements, changes in woodtemperature and moisture content were calculated and external heat-transfer coefficient wasdetermined for both the moist air and the superheated steam drying.展开更多
文摘As for drying the thick timber of Schima superba, the drying time is longer while using a normal temperature drying technology. By means of organically combining normal temperature drying with normal pressure superheated steam drying, not only could the drying time be reduce but drying quality was improved by the new technology. The key technology is controling temperature and humidity appropriately when drying technology was changed from normal pressure superheated steam to normal temperature.
基金Sino-Italian Cooperation Project "An Integrated System for the Planning, Monitoring and Real-time Forecasting of Floods Risks"
文摘The precision of atmospheric dry delay model is closely correlated with the accuracy of GPS water vapor in the process of GPS (Global Position System) remote sensing. Radiosonde data (from 1996 to 2001) at Qingyuan are used to calculate the exact values of the atmospheric dry delay. Base on these calculations and the surface meteorological parameters, the local year and month correction models of dry delay at the zenith angle of 0° are established by statistical methods. The analysis result shows that the local model works better and is slight more sensitive to altitude angle than universal models and that it is not necessary to build models for each month due to the slight difference between year model and month model. Furthermore, when the altitude angle is less than 75°, the difference between curve path and straight path increases rapidly with altitude angle’s decrease.
文摘In kiln drying of softwood timber, external heat and moisture mass transfercoefficients are important in defining boundary temperature and moisture content at the woodsurface. In addition, superheated steam drying of wood is a promising technology but this has notbeen widely accepted commercially, partially due to the lack of understanding of the dryingphenomena occurred during drying. In this work, experimental investigation was performed to quantifythe heat transfer between wood surface and surrounding moist air or superheated steam. In theexperiment, saturated radiata pine sapwood samples were dried using dry-bulb/wet-bulb temperaturesof 60℃/50℃, 90℃/60℃, 120℃/70℃, 140℃/90℃, 160℃/90℃, 140℃/100℃ and 160℃/100℃. The lasttwo schedules were for superheated steam drying as the wet-bulb temperature was set at 100℃. Thecirculation velocity over the board surface was controlled at 4.2m·s^(-1). Two additional runs(90℃/60℃) using air velocities of 2.4 m·s^(-1) and 4.8 m·s^(-1) were performed to check theeffect of the circulation velocity. During drying, sample weight and temperatures at wood surfaceand different depths were continuously measured. Prom these measurements, changes in woodtemperature and moisture content were calculated and external heat-transfer coefficient wasdetermined for both the moist air and the superheated steam drying.
