A novel vapor-liquid distributor was developed on the basis of sufficient study on the existing distributors applied in hydroprocessing reactors. The cold model test data showed that the fluid distribution performance...A novel vapor-liquid distributor was developed on the basis of sufficient study on the existing distributors applied in hydroprocessing reactors. The cold model test data showed that the fluid distribution performance of the novel vapor-liquid distributor was evidently better than the traditional one. Com- mercial tests of the new distributor were carded out in the 300 kt/a gas oil hydrotreating reactor at SINOPEC Changling Branch Company, showing that the new vapor-liquid distributor could improve the fluid distribution, promote the hydrotreating efficiency and lead to better performance than the traditional one.展开更多
As the performance of an air-cooled condenser is apt to be affected by the fluctuating ambient condition, some difficulties are brought to the use of a steam feeding water pump in an air-cooled unit. This paper introd...As the performance of an air-cooled condenser is apt to be affected by the fluctuating ambient condition, some difficulties are brought to the use of a steam feeding water pump in an air-cooled unit. This paper introduces a new design of for steam feeding the water pump of an air-cooled unit using the back-pressure steam turbine as the prime motor. Using variable condition analysis on a 600 MW direct air-cooled unit, and with consideration of the effect on the ambient conditions, the feasibility, economy, and adaptability of the design are verified.展开更多
An evaporator-condenser-separated mechanical vapor compression (MVC) system was presented. The better effect of descaling and antiscaling was obtained by the new system. This study focused on the method of thermodynam...An evaporator-condenser-separated mechanical vapor compression (MVC) system was presented. The better effect of descaling and antiscaling was obtained by the new system. This study focused on the method of thermodynamic analysis, and the energy and exergy flow diagrams were established by using the first and second law of thermodynamics analysis. The results show that the energy utilization rate is very high and the specific power consumption is low. Exergy analysis indicates that the exergy efficiency is low, and the largest exergy loss occurs within the evaporator-condenser and the compressor.展开更多
文摘A novel vapor-liquid distributor was developed on the basis of sufficient study on the existing distributors applied in hydroprocessing reactors. The cold model test data showed that the fluid distribution performance of the novel vapor-liquid distributor was evidently better than the traditional one. Com- mercial tests of the new distributor were carded out in the 300 kt/a gas oil hydrotreating reactor at SINOPEC Changling Branch Company, showing that the new vapor-liquid distributor could improve the fluid distribution, promote the hydrotreating efficiency and lead to better performance than the traditional one.
文摘As the performance of an air-cooled condenser is apt to be affected by the fluctuating ambient condition, some difficulties are brought to the use of a steam feeding water pump in an air-cooled unit. This paper introduces a new design of for steam feeding the water pump of an air-cooled unit using the back-pressure steam turbine as the prime motor. Using variable condition analysis on a 600 MW direct air-cooled unit, and with consideration of the effect on the ambient conditions, the feasibility, economy, and adaptability of the design are verified.
文摘An evaporator-condenser-separated mechanical vapor compression (MVC) system was presented. The better effect of descaling and antiscaling was obtained by the new system. This study focused on the method of thermodynamic analysis, and the energy and exergy flow diagrams were established by using the first and second law of thermodynamics analysis. The results show that the energy utilization rate is very high and the specific power consumption is low. Exergy analysis indicates that the exergy efficiency is low, and the largest exergy loss occurs within the evaporator-condenser and the compressor.
