The aim of this study was investigate the effects of heat treatment on the contact angle of Chinese fir, and the indicators affecting the change of contact an-gle change. It was determined that the duration of treatme...The aim of this study was investigate the effects of heat treatment on the contact angle of Chinese fir, and the indicators affecting the change of contact an-gle change. It was determined that the duration of treatment had significant effect on the change curves of contact angle of Chinese fir wood due to the change curves of contact angle became more centralized and orderly after the specimens heat treated at 180 ℃. Compared with the untreated wood, the contact angle in-creased from 51＆#176; to 124＆#176; after 4 h treatment, and hydroxyl absorbance of hy-drophilic functional groups decreased from 2.08 to 1.63, while carbonyl absorbance from 0.92 to 0.62. The surface roughness has not significant influence on the con-tact angle. Heat treatment of the Chinese fir caused surface morphological change, which produced hol owed-out phenomenon. The increased surface contact angle caused by heat treatment can be used for outdoor and sauna facilities.展开更多
Saturated vapor pressure was calculated from the nucleation experimental data using the thermodynamically consistent nucleation theory in which the effect of real gas is considered. The cubic polynomial fit equations ...Saturated vapor pressure was calculated from the nucleation experimental data using the thermodynamically consistent nucleation theory in which the effect of real gas is considered. The cubic polynomial fit equations of saturation pressure for several substances were obtained based on the calculation. The results of the calculations were compared to those of thermodynamic equilibrium equation and the empirical equation and applied to the predictions of the classical nucleation theory. The results show that the saturation pressures estimated from the nucleation data agree fairly well with those of empirical equations for the substances investigated, and this indicates that the predictions from the classical nucleation theory are close to the experimental data.展开更多
Five different kinds of hydrophilic organic salts were used to modify commercial activated carbon in order to prepare hydrophilic carbon materials. Properties of the samples were analyzed by surface area analyzer and ...Five different kinds of hydrophilic organic salts were used to modify commercial activated carbon in order to prepare hydrophilic carbon materials. Properties of the samples were analyzed by surface area analyzer and SEM-EDX. The hydrophilic organic salts with different properties were introduced into activated carbon and significantly affected the properties of the samples.During adsorption experiments, the water vapor adsorption amount in modified samples increases by 0.57-17.12 times in temperature range from 303 to 323 K and at relative pressure below 0.50. Water molecules combined with surface hydrophilic groups through H-bonding exhibit good thermo stability. The effects of temperature, oxygen content and properties of the hydrophilic organic salts on water vapor adsorption were studied. It is indicated that water vapor adsorption in modified samples is mainly affected by the surface oxygen content. The carboxylate radicals in the hydrophilic organic salts greatly affect the micropore structure of the modified samples, while the metal ions in them exhibit limited influence. Different adsorption capacity of modified samples can be explained with the electronegativity of elements presented by Pauling.展开更多
The technology that waste activated carbon after extracting gold is regenerated with steam under microwave heating was studied. The influence of the activation temperature, activation duration and steam flow rate on i...The technology that waste activated carbon after extracting gold is regenerated with steam under microwave heating was studied. The influence of the activation temperature, activation duration and steam flow rate on iodine adsorption value and regeneration yield of activated carbon was investigated. The response surface methodology （RSM） technique was utilized to optimize the process conditions. The optimum conditions for the preparation of activated carbon are identified to be activation temperature of 831 ℃, activation duration of 40 min and steam flow rate of 2.67 mL/min. The optimum conditions result in an activated carbon with an iodine number of 1048 mg/g and a yield of 40%, and the BET surface area evaluated using nitrogen adsorption isotherm is 1493 m2/g, with total pore volume of 1.242 cm3/g. And the pore structure of activated carbon regenerated is mainly composed of micropores and a small amount of mesopores.展开更多
The steady multi component vapor flows between two closed surfaces of evaporation and condensation are investigated numerically by the nonlinear Bhatnagar Gross Krook equation. The mathematical model will make it poss...The steady multi component vapor flows between two closed surfaces of evaporation and condensation are investigated numerically by the nonlinear Bhatnagar Gross Krook equation. The mathematical model will make it possible to determine the profiles of the process variables between two surfaces of evaporation and condensation if the conditions of evaporation and condensation surfaces are taken into consideration. It is used to simulate the vapor behaviors of the pure dibutylphthalate and the ethylhexyl phthalate ethylhexyl sebacate mixture. The effects of the liquid composition of the evaporation surface, the evaporation temperature, the condensation temperature and the distance between evaporation and condensation surfaces on the evaporation efficiency and separation factor are discussed.展开更多
To satisfy the requirement of surface energy budget research on the meso- and micro-scale, a parameterization is developed to calculate high spatial resolution, clear-sky downward longwave radiation （DLR） from HJ-IB...To satisfy the requirement of surface energy budget research on the meso- and micro-scale, a parameterization is developed to calculate high spatial resolution, clear-sky downward longwave radiation （DLR） from HJ-IB thermal data. The DLR algorithm is established based on extensive radiative transfer simulation and statistical analysis. To address the problem that HJ-1B has a single thermal channel and lacks atmospheric information, the brightness temperature of HJ-1B and water vapor content are used in the algorithm. An accuracy evaluation and error analysis for the algorithm is conducted using a simulated radiation da- taset. The result shows that the algorithm performs well in most circumstances, but there is obvious underestimation when wa- ter vapor content is greater than 4 g/cm2. Error analysis indicates the accuracy of estimated DLRs is affected by uncertainties in input parameters, including water vapor content and top-of-atmosphere radiance. It is also affected by the difference between ground and near-surface air temperature. The algorithm is applied to actual HJ-1B data, and validated by ground data from six stations in the Heihe River and Haihe River basins. The estimated DLRs have good consistency with measured data except at Huazhaizi, and root mean square errors at most sites are around 20 W/m2, which is slightly better than the result of MODIS. There is significant overestimation of DLR at Huazhaizi during summer, which is mainly produced by the large ground-air temperature difference. A correction process based on temperature difference is proposed and applied at Huazhaizi. The result shows that the positive bias is largely diminished after correction.展开更多
Experimental investigations of non-equilibrium spontaneous condensation in transonic steam flow were carded out in linear blade cascade. The linear cascade consists of the stator blades of the last stage of low pressu...Experimental investigations of non-equilibrium spontaneous condensation in transonic steam flow were carded out in linear blade cascade. The linear cascade consists of the stator blades of the last stage of low pressure steam turbine. The applied experimental test section is a part of a small scale steam power plant located at Silesian Uni- versity of Technology in Gliwice. The steam parameters at the test section inlet correspond to the real conditions in low pressure part of 200MWe steam turbine. The losses in the cascade were estimated using measured static pressure and temperature behind the cascade and the total parameters at inlet. The static pressure measurements on the blade surface as well as the Schlieren pictures were used to assess the flow field in linear cascade of steam turbine stator blades.展开更多
基金Supported by Science and Technology Programs of Liangqing District of Nanning City(201304A)Science and Technology Program of Guangxi University(XJZ120270)~~
文摘The aim of this study was investigate the effects of heat treatment on the contact angle of Chinese fir, and the indicators affecting the change of contact an-gle change. It was determined that the duration of treatment had significant effect on the change curves of contact angle of Chinese fir wood due to the change curves of contact angle became more centralized and orderly after the specimens heat treated at 180 ℃. Compared with the untreated wood, the contact angle in-creased from 51＆#176; to 124＆#176; after 4 h treatment, and hydroxyl absorbance of hy-drophilic functional groups decreased from 2.08 to 1.63, while carbonyl absorbance from 0.92 to 0.62. The surface roughness has not significant influence on the con-tact angle. Heat treatment of the Chinese fir caused surface morphological change, which produced hol owed-out phenomenon. The increased surface contact angle caused by heat treatment can be used for outdoor and sauna facilities.
基金Ⅵ. ACKN0WLEDGMENTS This work was supported Science Foundation of China by the National Natural （No.10272099）.
文摘Saturated vapor pressure was calculated from the nucleation experimental data using the thermodynamically consistent nucleation theory in which the effect of real gas is considered. The cubic polynomial fit equations of saturation pressure for several substances were obtained based on the calculation. The results of the calculations were compared to those of thermodynamic equilibrium equation and the empirical equation and applied to the predictions of the classical nucleation theory. The results show that the saturation pressures estimated from the nucleation data agree fairly well with those of empirical equations for the substances investigated, and this indicates that the predictions from the classical nucleation theory are close to the experimental data.
基金Projects(21376274,51206192)supported by the National Natural Science Foundation of China
文摘Five different kinds of hydrophilic organic salts were used to modify commercial activated carbon in order to prepare hydrophilic carbon materials. Properties of the samples were analyzed by surface area analyzer and SEM-EDX. The hydrophilic organic salts with different properties were introduced into activated carbon and significantly affected the properties of the samples.During adsorption experiments, the water vapor adsorption amount in modified samples increases by 0.57-17.12 times in temperature range from 303 to 323 K and at relative pressure below 0.50. Water molecules combined with surface hydrophilic groups through H-bonding exhibit good thermo stability. The effects of temperature, oxygen content and properties of the hydrophilic organic salts on water vapor adsorption were studied. It is indicated that water vapor adsorption in modified samples is mainly affected by the surface oxygen content. The carboxylate radicals in the hydrophilic organic salts greatly affect the micropore structure of the modified samples, while the metal ions in them exhibit limited influence. Different adsorption capacity of modified samples can be explained with the electronegativity of elements presented by Pauling.
基金Project(2013AA064003)supported by the National High Technology Research and Development Program of ChinaProject(2012HB008)supported by Young and Middle-aged Academic Technology Leader Backup Talent Cultivation Program in Yunnan Province,China
文摘The technology that waste activated carbon after extracting gold is regenerated with steam under microwave heating was studied. The influence of the activation temperature, activation duration and steam flow rate on iodine adsorption value and regeneration yield of activated carbon was investigated. The response surface methodology （RSM） technique was utilized to optimize the process conditions. The optimum conditions for the preparation of activated carbon are identified to be activation temperature of 831 ℃, activation duration of 40 min and steam flow rate of 2.67 mL/min. The optimum conditions result in an activated carbon with an iodine number of 1048 mg/g and a yield of 40%, and the BET surface area evaluated using nitrogen adsorption isotherm is 1493 m2/g, with total pore volume of 1.242 cm3/g. And the pore structure of activated carbon regenerated is mainly composed of micropores and a small amount of mesopores.
文摘The steady multi component vapor flows between two closed surfaces of evaporation and condensation are investigated numerically by the nonlinear Bhatnagar Gross Krook equation. The mathematical model will make it possible to determine the profiles of the process variables between two surfaces of evaporation and condensation if the conditions of evaporation and condensation surfaces are taken into consideration. It is used to simulate the vapor behaviors of the pure dibutylphthalate and the ethylhexyl phthalate ethylhexyl sebacate mixture. The effects of the liquid composition of the evaporation surface, the evaporation temperature, the condensation temperature and the distance between evaporation and condensation surfaces on the evaporation efficiency and separation factor are discussed.
基金supported by Knowledge Innovation Program of the Chinese Academy of Sciences(Grant No.KZCX2-YW-Q10-2-2)National Natural Science Foundation of China(Grant No.40971204)+1 种基金National High-tech R&D Program of China(Grant No.2012AA12A304)R&D Special Fund for Public Welfare Industry(Meteorology)(Grant No.GYHY200706046-1)
文摘To satisfy the requirement of surface energy budget research on the meso- and micro-scale, a parameterization is developed to calculate high spatial resolution, clear-sky downward longwave radiation （DLR） from HJ-IB thermal data. The DLR algorithm is established based on extensive radiative transfer simulation and statistical analysis. To address the problem that HJ-1B has a single thermal channel and lacks atmospheric information, the brightness temperature of HJ-1B and water vapor content are used in the algorithm. An accuracy evaluation and error analysis for the algorithm is conducted using a simulated radiation da- taset. The result shows that the algorithm performs well in most circumstances, but there is obvious underestimation when wa- ter vapor content is greater than 4 g/cm2. Error analysis indicates the accuracy of estimated DLRs is affected by uncertainties in input parameters, including water vapor content and top-of-atmosphere radiance. It is also affected by the difference between ground and near-surface air temperature. The algorithm is applied to actual HJ-1B data, and validated by ground data from six stations in the Heihe River and Haihe River basins. The estimated DLRs have good consistency with measured data except at Huazhaizi, and root mean square errors at most sites are around 20 W/m2, which is slightly better than the result of MODIS. There is significant overestimation of DLR at Huazhaizi during summer, which is mainly produced by the large ground-air temperature difference. A correction process based on temperature difference is proposed and applied at Huazhaizi. The result shows that the positive bias is largely diminished after correction.
基金supported by the National Science Centre funds within the project with nr.2011/03/B/ST8/06425
文摘Experimental investigations of non-equilibrium spontaneous condensation in transonic steam flow were carded out in linear blade cascade. The linear cascade consists of the stator blades of the last stage of low pressure steam turbine. The applied experimental test section is a part of a small scale steam power plant located at Silesian Uni- versity of Technology in Gliwice. The steam parameters at the test section inlet correspond to the real conditions in low pressure part of 200MWe steam turbine. The losses in the cascade were estimated using measured static pressure and temperature behind the cascade and the total parameters at inlet. The static pressure measurements on the blade surface as well as the Schlieren pictures were used to assess the flow field in linear cascade of steam turbine stator blades.
