期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
柱状分层固体媒质的声散射 被引量:2
1
作者 王耀俊 《物理学进展》 CSCD 北大核心 2003年第2期125-144,共20页
本文评述了各向同性和横向各向同性柱状分层固体声散射理论和实验研究进展 ,介绍了描述圆柱状界面薄层特性的弹簧模型 ,也讨论了该领域中有待进一步研究的一些问题。
关键词 各向同性 柱状分层固体媒质 超声散射 弹簧模型 各向异性 力学特性 圆柱状界面薄层 平面声波
下载PDF
路面养护中热界面薄层罩面应用分析 被引量:3
2
作者 冯莉娟 曾飞 《运输经理世界》 2020年第15期133-134,共2页
为了综合了解热界面薄层罩面技术的应用情况,通过立足实际,在论述热界面薄层罩面养护技术内涵的基础上,依托某路路面工程实例对该技术的应用要点进行了综合探讨,获得热界面薄层罩面的平整度良好、渗水性小、抗滑性能平稳的结果,总结出... 为了综合了解热界面薄层罩面技术的应用情况,通过立足实际,在论述热界面薄层罩面养护技术内涵的基础上,依托某路路面工程实例对该技术的应用要点进行了综合探讨,获得热界面薄层罩面的平整度良好、渗水性小、抗滑性能平稳的结果,总结出热界面薄层罩面技术的运用方法及其优点,可以给该领域的工作人员提供相应的借鉴。 展开更多
关键词 公路工程 路面养护 界面薄层罩面
原文传递
路面养护施工中热界面薄层罩面应用分析
3
作者 何延明 《运输经理世界》 2021年第1期27-28,共2页
在高速公路路面养护工程施工阶段,热界面薄层罩面技术属于近年来常见的一项技术,该技术的应用机理主要是通过沥青混合料的加热摊铺提高路面基层的质量,对促进路面养护工程项目的开展有着积极的作用。为了能够对热界面薄层罩面技术的应... 在高速公路路面养护工程施工阶段,热界面薄层罩面技术属于近年来常见的一项技术,该技术的应用机理主要是通过沥青混合料的加热摊铺提高路面基层的质量,对促进路面养护工程项目的开展有着积极的作用。为了能够对热界面薄层罩面技术的应用效果有更为全面的了解,通过立足实际,在阐述热界面薄层罩面技术发展现状的同时,对热界面薄层罩面技术在路面养护工程中的应用要点进行了深入探讨,希望给同类工程提供参考。 展开更多
关键词 高速公路 路面养护 界面 界面薄层罩面
原文传递
曲面工件超声外圆轴向检测探头与对比试块曲率半径选择问题的探讨 被引量:2
4
作者 刘英和 王树功 +1 位作者 闫皓 李安营 《无损探伤》 2016年第5期16-19,共4页
超声检测标准规定,检测面曲率半径小于250mm对接接头超声检测,如检测面曲率半径R≤W2/4时,应采用与检测面曲率相同的对比试块。实际检测中,由于大量曲率半径小于250mm的对接接头不适合上述计算方法,并同时缺少对探头表面曲率的要求,致... 超声检测标准规定,检测面曲率半径小于250mm对接接头超声检测,如检测面曲率半径R≤W2/4时,应采用与检测面曲率相同的对比试块。实际检测中,由于大量曲率半径小于250mm的对接接头不适合上述计算方法,并同时缺少对探头表面曲率的要求,致使曲面工件检测时,其工件曲率与所用探头及对比试块的曲率达不到合理的耦合要求,使检测灵敏度与信噪比无法得到有效控制。本文通过不同厚度"薄层界面对声强透射率"的影响,对直径600mm以下曲面工件检测所用探头与对比试块曲率的确定进行了论述。 展开更多
关键词 轴向曲率 耦合层 薄层界面 声强透射率 检测系统
原文传递
Formation of efficient dye-sensitized solar cells by introducing an interfacial layer of hierarchically ordered macro-mesoporous TiO_2 film 被引量:6
5
作者 HALPERT Jonathan E 《Science China Chemistry》 SCIE EI CAS 2011年第6期930-935,共6页
Hierarchically ordered macro-mesoporous TiO2 films (Ti-Ma-Me) were fabricated on fluorine-doped tin oxide (FTO) substrates through the confinement self-assembly method. The prepared Ti-Ma-Me possesses periodically ord... Hierarchically ordered macro-mesoporous TiO2 films (Ti-Ma-Me) were fabricated on fluorine-doped tin oxide (FTO) substrates through the confinement self-assembly method. The prepared Ti-Ma-Me possesses periodically ordered structure and a large specific surface area, which was applied as an interfacial layer between the nanocrystalline TiO2 film (P25-TiO2) and FTO electrode in the dye-sensitized solar cell (DSSC). The introduction of a Ti-Ma-Me interfacial layer increased the shortcircuit current density (Jsc) from 7.49 to 10.65 mA/cm2 and the open-circuit voltage (Voc) from 0.65 to 0.70 V as the result of its improved light harvesting efficiency by allowing for the high roughness factor and enhanced multiple internal reflection or scattering as well as reducing the back-transport reaction by blocking direct contact between the electrolyte and FTO electrode. Therefore, the photovoltaic conversion efficiency (η) was improved by 83% from 3.04% to 5.55%, as compared to a device using a bare P25 TiO2 photoanode. 展开更多
关键词 dye-sensitized solar cells hierarchical ordered macro-mesoporous PHOTOANODE
原文传递
SnO_2 nanosheet as a photoanode interfacial layer for dyesensitized solar cells 被引量:1
6
作者 蔡锋石 王菁 +1 位作者 袁志好 段月琴 《Optoelectronics Letters》 EI 2011年第5期321-324,共4页
SnO2 nanosheet films about 200 nm in thickness are successfully fabricated on fluorine-doped tin oxide (FTO) glass by a facile solution-grown approach. The prepared SnO2 nanosheet film is appfied as an interfacial l... SnO2 nanosheet films about 200 nm in thickness are successfully fabricated on fluorine-doped tin oxide (FTO) glass by a facile solution-grown approach. The prepared SnO2 nanosheet film is appfied as an interfacial layer between the nanocrystalline TiO2 film and the FTO substrate in dye-sensitized solar cells (DSCs). Experimental results show that the introduction of a SnO2 nanosheet film not only suppresses the electron back-transport reaction at the electrolyte/FTO interface but also provides an efficient electron transition channel along the SnO2 nanosheets, and as a result, increasing the open circuit voltage and short current density, and finally improving the conversion efficiency for the DSCs from 3.89% to 4.62%. 展开更多
关键词 Conversion efficiency Electron transitions FLUORINE Interfaces (materials) NANOCOMPOSITES Open circuit voltage Oxide films Photoelectrochemical cells Solar cells Tin Tin oxides Titanium dioxide
原文传递
Gas Absorption by Wavy Falling Liquid Film Formed on Inner Surface of Vertical lubes
7
作者 Akio Miyara Tomoki Yamamoto +1 位作者 Toru Iemura Takashi Shimada 《Journal of Thermal Science》 SCIE EI CAS CSCD 2003年第1期57-61,共5页
An experimental study on gas absorption into falling liquid film formed on inner surface of vertical tubes has been carried out in order to clarify fundamental characteristics of the gas absorption and enhancement by ... An experimental study on gas absorption into falling liquid film formed on inner surface of vertical tubes has been carried out in order to clarify fundamental characteristics of the gas absorption and enhancement by surface waves. The water supplied into the test tubes is periodically disturbed by fluctuating a silicon tube before the test section with a speaker and the wavy films absorb the oxygen filled in the tubes. Imposing the periodic disturbance enhances the gas absorption and the enhancement has a maximum at around 20-30 Hz, where the gas absorption is 20-30% higher. Mass transfer coefficients obtained with five tubes agree well with those obtained with single tube. Two-dimensional numerical simulations have also been conducted for gas absorption by wavy film and the enhancement mechanism of the gas absorption is discussed. 展开更多
关键词 falling liquid film gas absorption surface wave vertical tube mass transfer enhancement.
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部