In routine design of tensioned membrane structures, the membrane is generally modeled using space membrane elements and the cables by space cable elements, with no sliding allowed between the membrane and the cables. ...In routine design of tensioned membrane structures, the membrane is generally modeled using space membrane elements and the cables by space cable elements, with no sliding allowed between the membrane and the cables. On the other hand, large deflections are expected and sliding between the membrane and the cables is inevitable. In the present paper, the general finite element code ABAQUS was employed to investigate the influence of cable sliding on membrane surface on the structural behavior. Three analysis models were devised to fulfill this purpose: (1) The membrane element shares nodes with the cable element; (2) The cable can slide on the membrane surface freely (without friction) and (3) The cable can slide on the membrane surface, but with friction between the cable and the membrane. The sliding problem is modeled using a surface - based contact algorithm. The results from three analysis models are compared, showing that cable sliding has only little influence on the structure shape and on the stress distributions in the membrane. The main influence of cable sliding may be its effect on the dynamic behavior of tensioned membrane structures.展开更多
We report the fabrication of CuI-Si heterojunction solar cells with carbon nanotubes （CNTs） as a transparent electrode. A flexible CNT network was transferred onto tile top of a polycrystalline CuI layer, making a c...We report the fabrication of CuI-Si heterojunction solar cells with carbon nanotubes （CNTs） as a transparent electrode. A flexible CNT network was transferred onto tile top of a polycrystalline CuI layer, making a conformal coating with good contact with the underlying CuI. The solar cells showed power conversion efficiencies in the range of 6% to 10.5%, while the efficiency degradation was less than 10% after the device was stored in air for 8 days. Compared with conventional rigid electrodes such as indium tin oxide （ITO） glass, the flexibility of the CNT films ensures better contact with the active layers and removes the need for press-contact electrodes. Degraded cells can recover their original performance by acid doping of the CNT electrode. Our results suggest that CNT films are suitable electrical contacts for rough materials and structures with an uneven surface.展开更多
In-situ prepared MoO3 thin layer has been introduced to suppress the formation of too thick Mo(S,Se)2layer in Cu2ZnSnSxSe4–x(CZTSSe) solar cells. This MoO3 layer effectively improves the back interfacial contact betw...In-situ prepared MoO3 thin layer has been introduced to suppress the formation of too thick Mo(S,Se)2layer in Cu2ZnSnSxSe4–x(CZTSSe) solar cells. This MoO3 layer effectively improves the back interfacial contact between CZTSSe absorber layer and Mo substrate without poisoning the carrier transport. Up to 10.58% power conversion efficiency has been achieved.展开更多
文摘In routine design of tensioned membrane structures, the membrane is generally modeled using space membrane elements and the cables by space cable elements, with no sliding allowed between the membrane and the cables. On the other hand, large deflections are expected and sliding between the membrane and the cables is inevitable. In the present paper, the general finite element code ABAQUS was employed to investigate the influence of cable sliding on membrane surface on the structural behavior. Three analysis models were devised to fulfill this purpose: (1) The membrane element shares nodes with the cable element; (2) The cable can slide on the membrane surface freely (without friction) and (3) The cable can slide on the membrane surface, but with friction between the cable and the membrane. The sliding problem is modeled using a surface - based contact algorithm. The results from three analysis models are compared, showing that cable sliding has only little influence on the structure shape and on the stress distributions in the membrane. The main influence of cable sliding may be its effect on the dynamic behavior of tensioned membrane structures.
基金This work is supported by the National Natural Science Foundation of China （NSFC, Grant No.50972067） and the 863 Program （No. 2009AA05Z423）. A. Cao acknowledges the support by the National Science Foundation of China （NSFC, No. 51072005） and C. Huang acknowledges NSFC No. 90922004 for financial support.
文摘We report the fabrication of CuI-Si heterojunction solar cells with carbon nanotubes （CNTs） as a transparent electrode. A flexible CNT network was transferred onto tile top of a polycrystalline CuI layer, making a conformal coating with good contact with the underlying CuI. The solar cells showed power conversion efficiencies in the range of 6% to 10.5%, while the efficiency degradation was less than 10% after the device was stored in air for 8 days. Compared with conventional rigid electrodes such as indium tin oxide （ITO） glass, the flexibility of the CNT films ensures better contact with the active layers and removes the need for press-contact electrodes. Degraded cells can recover their original performance by acid doping of the CNT electrode. Our results suggest that CNT films are suitable electrical contacts for rough materials and structures with an uneven surface.
基金financially supported by the National Natural Science Foundation of China (91733301, 51761145042, 51627803, 21501183, 51402348, 11474333, 91433205 and 51421002)the Knowledge Innovation Program and the Strategic Priority Research Program (Grant XDB 12010400) of the Chinese Academy of Sciences
文摘In-situ prepared MoO3 thin layer has been introduced to suppress the formation of too thick Mo(S,Se)2layer in Cu2ZnSnSxSe4–x(CZTSSe) solar cells. This MoO3 layer effectively improves the back interfacial contact between CZTSSe absorber layer and Mo substrate without poisoning the carrier transport. Up to 10.58% power conversion efficiency has been achieved.
