《丛薄行诗意图》与《清高宗大阅图》考析——清代多民族国家形成的图像见证

《丛薄行诗意图》与《清高宗大阅图》是以乾隆皇帝为主角的两幅场面宏大、气势非凡的巨幅画卷,是意大利画家郎世宁奉旨于乾隆二十三年十月间先后绘成。乾隆皇帝为什么要在这一年同时绘制两幅巨画?它们之间有无联系?绘制这两幅画卷的意义何在?本文通过对画面内容的分析和对清军平息南疆大小和卓木叛乱时布鲁特民族主动归顺这一重要历史事件的论述,阐明了乾隆皇帝在平准平回战争中,以不同的民族宗教政策,区别对待有别于满蒙民族的信仰回教的布鲁特部,从而顺利推进了清廷统一西北的战争。这两幅巨图,既体现了乾隆优待礼遇布鲁特部的重要举措,又是清代形成多民族国家的历史见证。

Corrosion behavior of tinplate in NaCl solution

The corrosion process of tinplate in 0.5 mol/L NaCl solution was investigated using the electrochemical impedance spectroscopy（EIS）,and the morphology and structure of the corrosion products were characterized by scanning electron microscope（SEM）,scanning probe microscopy（SPM）,X-ray diffraction（XRD） and X-ray photoelectron spectroscopy（XPS）.The results showed that the resistance of tin coating,Rc,was essentially constant but the charge transfer resistance,Rct,decreased by 2 orders of magnitude,which indicated that the tin coating was not seriously corroded while the carbon steel substrate was corroded continuously.The corrosion of tinplate in 0.5 mol/L NaCl solution was mainly the dissolution of carbon steel substrate because of the defects in the tin layer and the corrosion product was mainly γ-FeOOH.

Effects of tribological behavior of DLC film on micro-deep drawing processes

To decrease the size effects of friction in microforming, three kinds of surface coatings, such as diamond-like carbon（DLC）, TiN and MoS2, were deposited on surfaces of dies with plasma based ion implantation and deposition（PBII D） method and magnetron sputtering technique, respectively. The tribological behavior of surface coatings was analyzed considering plastic deformation of specimen at contact interface. The analyses indicate that there is a lower coefficient of friction（COF） and a high wear resistance under the condition of large strain/stress when using the DLC film. The graphitization of DLC film occurs after 100 times of tests. The mechanism of graphitization was analyzed considering energy induced by friction work. The effects of DLC film properties on qualities of micro-deep drawn parts were investigated by analyzing the reduction of wall thickness, etc. The results indicate that DLC film is very helpful for improving the qualities of the micro-parts.

ZnO Films Synthesized by Solid-Source Chemical Vapor Deposition with c-Axis Parallel to Substrate

ZnO films with c -axis parallel to the substrate are reported.ZnO films are synthesized by solid-source chemical vapor deposition,a novel CVD technique,using zinc acetate dihydrate (solid) as the source material.The properties are characterized by X-ray diffraction,atomic force microscopy and transmission spectra.The parallel oriented ZnO films with mixed orientation for (100) and (110) planes are achieved on glass at the substrate temperature of 200℃ and the source temperature of 280℃,and a qualitative explanation is given for the forming of the mixed orientation.AFM images show that the surface is somewhat rough for the parallel oriented ZnO films.The transmission spectrum exhibits a high transmittance of about 85% in the visible region and shows an optical band gap about 3.25eV at room temperature.

Comparative Study of _(99m)TcN(NOEt)_2 and ^(99m)Tc-MIBI Imaging in Mice Bearing Ehrlich Ascites Tumor

Objective To evaluate and compare the ability to detect tumor by bis (N-ethoxy-N-ethyl dithiocarbamato) nitrido99mTc(V) [99mTcN(NOEt)2] and99mTc hexakis-2- methoxyisobutyl isonitrile [99mTc-MIBI]. Methods 99mTcN(NOEt)2 was prepared and quality control was performed using ascending thin-layer chromatography. Four mice bearing Ehrich ascites tumor cells underwent whole body planar imaging at 30 min, 2 h and 4 h after injection of99mTc-MIBI or99mTcN(NOEt)2. ROIs were drawn around the tumor, head, chest, and contralateral limbs in whole body planar images, and ratios of radioactivity in tumor in head (T/H), chest (T/C), and contralateral limbs (T/L) were calculated. The mice of99mTcN (NOEt)2 group were killed, then blood was collected, and the tumor and organs were excised, weighed and the radioactivity was measured. Results 99mTcN(NOEt)2 was stable after 4h at the room temperature.99mTcN(NOEt)2 was delivered to the tumor selectively and efficiently.99mTcN(NOEt)2 was found to provide excellent tumor-to-nontumor contrast for all the tissue except the abdomen. The T/L ratios increased to their maximums (4.87) at 2 h after injection. There was significant difference between the99mTcN(NOEt)2 imaging group and99mTc-MIBI imaging group. In vitro the radioactivity ratios per unit weight of tumor to blood, muscle, skeleton, lung, heart, and spleen were much higher than those of tumor to liver, instestine. Conclusion In mice bearing Ehrich ascites tumor,99mTcN(NOEt)2 exhibits a set of features essential for a good tracer for tumor imaging, including a rapid washout from blood, high uptake rate in tumor tissue, prolonged retention and high tumor-to-nontumor uptake ratio. The imaging quality of99mTcN(NOEt)2 was superior to that of99mTc-MIBI. These features indicate that99mTcN(NOEt)2 may be a better tracer to detect tumor than99mTc-MIBI. Key words tumor - radionuclide imaging - NOEt - MIBI

Crack Quantification of Bolted Joints by Using a Parallelogram Eddy Current Array Sensing Film

Crack monitoring at the bolt hole edge is one of the important focuses of aircraft structural health monitoring.In this study,a novel eddy current sensing film based on a parallelogram coil array is developed to quantitatively monitor the crack characteristics near the bolt hole with fewer layers and coils,compared with the existing methods.The parallelogram coil array configuration is designed and optimized to improve the quantitative monitoring ability of the crack.A 3×3 parallelogram coil array is used to quantify the crack parameters of aluminum bolted joints.Finite element simulation and experiments show that the proposed parallelogram coil array could not only accurately and quantitatively identify the crack angle at the edge of the bolt hole,but also track the crack length along the radial direction of the bolt hole and the depth along the axial direction.

Eliminating shrinkage defects and improving mechanical performance of large thin-walled ZL205A alloy castings by coupling travelling magnetic fields with sequential solidification

ZL205 A alloys with large thin-walled shape were continuously processed by coupling travelling magnetic fields(TMF)with sequential solidification,to eliminate the shrinkage defects and optimize the mechanical performance.Through experiments and simulations,the parameter optimization of TMF and the influence on feeding behavior,microstructure and properties were systematically studied.The results indicate that the magnetic force maximizes at the excitation current of 20 A and frequency of 200 Hz under the experimental conditions of this study,and increases from center to side-walls,which is more convenient to process thin-walled castings.TMF can break secondary dendritic arm and dendrites overlaps,widen feeding channels,prolong the feeding time,optimize the feeding paths,eliminate shrinkage defects and improve properties.Specifically,for as-cast state,TMF with excitation current of 20 A increases ultimate tensile strength,elongation and micro-hardness from 186 MPa,7.3%and 82.1 kg/mm^(2) to 221 MPa,11.7%and 100.5 kg/mm^(2),decreases porosity from 1.71%to 0.22%,and alters brittle fracture to ductile fracture.

Sorption and Diffusion Behavior of Carbon Dioxide into Poly（l-lactic acid） Films at Elevated Pressures

Equilibrium sorption amount, desorption diffusion coefficients and sorption diffusion coefficients of CO2 in poly（l-lactic acid） （PLLA） films at elevated pressures were determined by the gravimetric method, in which the Fick＇s diffusion model was applied to analyze both the desorption and sorption processes. The equilibrium sorption amount of CO2 in PLLA increased with lowering temperature and elevating pressure at the temperature range from 40 to 60 ℃ and pressure from 10^4 to 2x10^4 kPa. Desorption diffusion coefficients were greatly influenced by the equilibrium sorption amount, and they were in the same order of magnitude as the sorption diffusion coefficients. The scan electron microscope （SEM） photos demonstrated that there was no foaming phenomenon of the PLLA film during desorption and sorption processes. The XRD spectra implied that the crystalline degree of PLLA film decreased after CO2 processing. It was concluded that PLLA polymer could be well swollen and plasticized by supercritical CO2.

Transport phenomena in meniscus region of horizontal single belt casting

The horizontal single belt casting(HSBC)incorporating a single-impingement feeding system was simulated with an improved numerical model.Physical experiments were carried out on the pilot-scale caster for validation.The results show that the meniscus turbulence neither comes from the tundish region,nor from the impingement between the melt and the moving belt.It is the moving belt that gives rise to this high turbulence region,and this region can stir the melt near the meniscus.The feeding system studied and the moving belt give rise to a buffer region,which can optimize casting parameter variations,especially melt depth changes in the tundish.The temperature change rate of the bottom surface of the strip is around 4 times faster than that of the upper surface.

Shape optimization of plate with static and dynamic constraints via virtual laminated element

The virtual laminated element method (VLEM) can resolve structural shap e optimization problems with a new method. According to the characteristics of V LEM , only some characterized layer thickness values need be defined as design v ariables instead of boundary node coordinates or some other parameters determini ng the system boundary. One of the important features of this method is that it is not necessary to regenerate the FE(finite element) grid during the optimizati on process so as to avoid optimization failures resulting from some distortion grid elements. Th e thickness distribution in thin plate optimization problems in other studies be fore is of stepped shape. However, in this paper, a continuous thickness distrib ution can be obtained after optimization using VLEM, and is more reasonable. Fur thermore, an approximate reanalysis method named ″behavior model technique″ ca n be used to reduce the amount of structural reanalysis. Some typical examples are offered to prove the effectiveness and practicality of the proposed method.

Collapse behavior evaluation of hybrid thin-walled member by stacking condition

The recent trend of vehicle design aims at crash safety and environmentally-friendly aspect. For the crash safety aspect, the energy absorbing members should absorb collision energy sufficiently but for the environmentally-friendly aspect, the vehicle structure must be light weight in order to improve the fuel efficiency and reduce the tail gas emission. Therefore, the light weight of vehicle must be achieved in a securing safety status of crash. An aluminum or carbon fiber reinforced plastics (CFRP) is representative one of the light-weight materials. Based on the respective collapse behavior of aluminum and CFRP member, the collapse behavior of hybrid thin-walled member was evaluated. The hybrid members were manufactured by wrapping CFRP prepreg sheets outside the aluminum hollow members in the autoclave. Because the CFRP is an anisotropic material whose mechanical properties, such as strength and elasticity, change with its stacking condition, the effects of the stacking condition on the collapse behavior evaluation of the hybrid thin-walled member were tested. The collapse mode and energy absorption capability of the hybrid thin-walled member were analyzed with the change of the fiber orientation angle and interface number.

Mapping relationship analysis of welding assembly properties for thin-walled parts with finite element and machine learning algorithm

The finite element(FE)-based simulation of welding characteristics was carried out to explore the relationship among welding assembly properties for the parallel T-shaped thin-walled parts of an antenna structure.The effects of welding direction,clamping,fixture release time,fixed constraints,and welding sequences on these properties were analyzed,and the mapping relationship among welding characteristics was thoroughly examined.Different machine learning algorithms,including the generalized regression neural network(GRNN),wavelet neural network(WNN),and fuzzy neural network(FNN),are used to predict the multiple welding properties of thin-walled parts to mirror their variation trend and verify the correctness of the mapping relationship.Compared with those from GRNN and WNN,the maximum mean relative errors for the predicted values of deformation,temperature,and residual stress with FNN were less than 4.8%,1.4%,and 4.4%,respectively.These results indicate that FNN generated the best predicted welding characteristics.Analysis under various welding conditions also shows a mapping relationship among welding deformation,temperature,and residual stress over a period of time.This finding further provides a paramount basis for the control of welding assembly errors of an antenna structure in the future.

Evolution of Goss texture in thin-walled copper tube at different heat treatment temperatures

The evolution of microstructure,textures,and mechanical properties of thin-walled copper tube during heat treatment was investigated using EBSD technique and tensile test.The results show that the initial deformation textures of pre-drawn thin-walled copper tube are mainly composed of Copper and Y components,while with the increase of temperatures,the textures are transformed into a strong Goss texture gradually.The high-resolution microstructural characterizations indicate that the new Goss recrystallized grains nucleate and grow up within the deformed Copper grains and Y grains in different mechanisms,respectively.The tensile strength of the thin-walled copper tube decreases gradually with the increase of the temperature,while the elongation increases first and then decreases sharply due to the action of grain sizes and texture components.

Multi-Functioning in Virtual Monitoring of Thin-Walled Bridges

Multi-functioning in virtual monitoring and assessment of ultimate dynamics of thin-walled bridges is treated in present paper. The approach enables multiple functions in virtual monitoring of the bridges made of integrated thin-walled members with their hierarchical configuration. Theoretical, numerical and experimental in situ assessments of the problem are presented. Some results of structural application are submitted.

Some Aspects of the Behavior for Orthotropic Thin Plates with Clamped Edges

In most structural applications, composite structures can be idealized as beams, plates or shells. The analysis is reduced from three-dimensional elasticity problem to a one-dimensional, or two-dimensional problem, based on certain simplifying assumptions that can be made because the structure is thin. In this article is presented the mathematical model properly thin orthotropic plates, based on simplifying assumptions Love- Kirchhoff and small deformations. Proposed analytical solutions are considered both for solving equation orthotropic rectangular plates and for modal analysis, in the case of plates with clamped edges. The purposed solutions were analysed considering a FEM solution for comparison and the experimental test results.

Ion-Conductive-Polymer-Film Actuators with Pt Electrodes Selectively Grown using Non-Electrolyzed Plating

Organic soft actuators are of special interest in many fields including intravascular neurosurgery. Ion conductive polymer film （ICPF） actuators have been one of the strong candidates. The ICPF investigated here was a cation-exchange membrane （Nation 117, Du Pont）. When a voltage is given between the metal eIectrodes of an ICPF actuator, the ICPF actuator bends in the water due to the motion of Li＋ cations with associated water. In order to increase the freedom of the deformation of the ICPF actuator, structures of independent electrode pairs were proposed. The electrodes were selectively deposited by non-electrokvzed plating including the Pt [（NH3）6]^4＋ deposition process in a [Pt（NH3）6]Cl4 solution and the reduction process in a NaBH4 solution. Here, an elastomer adhesive tape with a fine electrode patterns was used performances were reported in detail. as a mask. The actuators processing conditions and their actuator

Macroscopic and microscopic trans-scale characteristics of pore structure of mine grouting materials

The pore structure and porosity of three kinds of mine grouting materials were characterized based on a thin-section analysis and low-field nuclear magnetic resonance (NMR) technique. The macroscopic pore interconnectivity was investigated using binary images captured from thin sections and a random walk pore spectral dimension (RWPSD) algorithm. The experimental results show that the microstructure of the grouting materials used consisted of interlayer pores, gel pores, capillary pores, circular air holes, and small fractures, and tailings can fill some gaps in the hydration product structure and dense hydration products. There is a positive correlation between pore interconnectivity and curing time. In addition, there is a relationship between pore interconnectivity and porosity. With increasing porosity and pore interconnectivity, a non-uniform pore structure occurs in mine grouting materials with an accelerator and results in reduced setting time and later strength.

Corrosion Behavior of Anodic Oxidized TiO_2 Film in Seawater

TiO2 films were formed on metallic titanium substrates by the anodic oxidation method in H2SO4 solution under the 80V D.C..Phase component and microstructure were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM).Water contact angles on titanium oxide film surface were measured under both dark and sunlight illumination conditions.Corrosion tests were carried out in seawater under different illumination conditions by electrochemistry impedance spectrum (EIS) and polarization curves.The result showed that the TiO2 film prepared by the anodic oxidation method was anatase with a uniform structure and without obvious pores or cracks on its surface.The average water contact angle of the film was 116.4? in dark, in contrast to an angle of 42.7? under the UV illumination for 2 hours, which demonstrates good hydrophobic property.The anti-corrosion behavior of the TiO2 film was declining with the extended immersion time.Under dark conditions, however, the hydrophobic TiO2 film retarded the water infiltrating into the substrate.The impedance changed slowly and the corrosion current density was 2 orders of magnitude lower than that with the film illuminated by sunlight.All of those mentioned above indicate that the TiO2 film possesses much better performance under dark condition, and it can be applied as an engineering material under dark seawater environment.

Microstructure and abrasive wear behaviour of anodizing composite films containing Si C nanoparticles on Ti6Al4V alloy

Anodized composite films containing Si C nanoparticles were synthesized on Ti6Al4 V alloy by anodic oxidation procedure in C4O6H4Na2 electrolyte. Scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray photoelectron spectroscopy(XPS) were employed to characterize the morphology and composition of the films fabricated in the electrolytes with and without addition of Si C nanoparticles. Results show that Si C particles can be successfully incorporated into the oxide film during the anodizing process and preferentially concentrate within internal cavities and micro-cracks. The ball-on-disk sliding tests indicate that Si C-containing oxide films register much lower wear rate than the oxide films without Si C under dry sliding condition. Si C particles are likely to melt and then are oxidized by frictional heat during sliding tests. Potentiodynamic polarization behavior reveals that the anodized alloy with Si C nanoparticles results in a reduction in passive current density to about 1.54×10-8 A/cm2, which is more than two times lower than that of the Ti O2 film(3.73×10-8 A/cm2). The synthesized composite film has good anti-wear and anti-corrosion properties and the growth mechanism of nanocomposite film is also discussed.

Electrochemical Behavior of Electrodeposited Sn Films： Possible Negative Electrode for Na^＋ Rechargeable Batteries

Tin films on copper substrate, obtained by electrodeposition procedure, were structural and electrochemical characterized. In particular to investigate the possibility to use such metal as possible negative electrode in Na＋ rechargeable batteries, EPS （electrochemical potential spectroscopy） and galvanostatic charge/discharge cycling of the electrodes were investigated, at room temperature in organic electrolyte. Three crystalline and one amorphous phases were identified as well as high discharge capacity （738 mAb/g） was obtained after 4 cycles. Unfortunately material fading, due to the internal stress during sodiation/desodiation process, causes poor cyclability.