This paper presents a new electromagnetic functional material developed byelectron-less nickel deposition technique, with a single hollow micro-sphere as the core templateand a thin nickel layer as the shell. The micr...This paper presents a new electromagnetic functional material developed byelectron-less nickel deposition technique, with a single hollow micro-sphere as the core templateand a thin nickel layer as the shell. The micrograph taken by a scanning electron microscope showsthe microstructures of the materials in detail. Scattering parameters of the waveguide sample holderfilled with the materials have been obtained over X band. The electromagnetic parameters computedfrom the measured S parameters show that the material with metallic hollow spheres has as highrelative permeability μ'_r as 19.0 with about 0.6 magnetic loss tangent over the whole bandwidth.Compared to the material with non-metallic spheres, the permeability μ'_r and the magnetic losstangent μ'_r increase greatly, while the permittivity remains lower than 1.8.展开更多
Molecular layer deposition （MLD） for the deposition of polyimide （PI） at low temperature of 110 ℃ has been firstly introduced into the field of membrane separation. With the optimized MLD deposition parameters, s...Molecular layer deposition （MLD） for the deposition of polyimide （PI） at low temperature of 110 ℃ has been firstly introduced into the field of membrane separation. With the optimized MLD deposition parameters, such low de- position temperature has successfully expanded the application of MLD for the surface modification of polymeric materials. Globular PI particulates grow on both the free surfaces as well as the pore walls of the polypropylene （PP） membranes as isolated islands during progressive precursor exposures. The PI-deposited PP membranes ex- hibit synergistically improved performances in various aspects. Evidently improved surface hydrophilicity and per- meation performance （30%） have been achieved v/a the MLD deposition of polyimide films. The overall separation efficiency maintained higher than 85% even after 250 cycles of MLD deposition. More importantly, the thermal sta- bility has been improved and the integrity of the porous structure for PI-deposited PP membranes has been well preserved even after harsh treatment, which ensures its potential application in industries.展开更多
Silica gel impregnated with 1% aqueous solutions of different metal cations （Li^＋, Mg^2＋, Zn^2＋, Cu^2＋, Co^2＋, Ni^2＋, Ba^2＋and Th^4＋） has been used for the analysis of nonionic and cationic surfaetants using...Silica gel impregnated with 1% aqueous solutions of different metal cations （Li^＋, Mg^2＋, Zn^2＋, Cu^2＋, Co^2＋, Ni^2＋, Ba^2＋and Th^4＋） has been used for the analysis of nonionic and cationic surfaetants using simple aqueous acetone as mobile phase system. Co^2＋ was found the most suitable impregnant for the mutual separation of nonionic surfactants （Brij-35 and Brij-57） and cationic from nonionic surfactants （tetmdecyltrimethylammonium bromide and Cween-20）. Zinc sulphate impregnation （Zn^2＋-silica gel） shows identical chromatographic behavior and these layers are useful to separate nonionic surfactant （Brij-35） from cationic surfaetant （cetylpyridinium chloride）. The mutual separation of B J-35 and B J-57 is not influenced by the presence of optical brightener in the sample.展开更多
We investigated the higher structure of konjac glucomannan (KGM) in the amorphous state and solution using a laser particle size analyzer and a water activity meter. The results show that the thermodynamic structures ...We investigated the higher structure of konjac glucomannan (KGM) in the amorphous state and solution using a laser particle size analyzer and a water activity meter. The results show that the thermodynamic structures of native KGM were primarily composed of the lamella structure units, which involve both granular crystalline and amorphous regions, and that the connection zones of such units contained both loose and tight aggregation regions. The value of surface tension (σ) of native KGM, resting with the density of its hydroxyl groups' self-association, was an important parameter to analyze the higher structures of native KGM in the thermodynamic swelling model of native KGM.展开更多
Titanium dioxide (TiO2) thin film was deposited on the surface of the light addressable potentiometric sensor (LAPS) to modify the sensor surface for the non-labeled detection of DNA molecules. To evaluate the effect ...Titanium dioxide (TiO2) thin film was deposited on the surface of the light addressable potentiometric sensor (LAPS) to modify the sensor surface for the non-labeled detection of DNA molecules. To evaluate the effect of ultraviolet (UV) treatment on the silanization level of TiO2 thin film by 3-aminopropyltriethoxysilane (APTS),fluorescein isothiocyanate (FITC) was used to label the amine group on the end of APTS immobilized onto the TiO2 thin film. We found that,with UV irradiation,the silanization level of the irradiated area of the TiO2 film was improved compared with the non-irradiated area under well-controlled conditions. This result indicates that TiO2 can act as a coating material on the biosensor surface to improve the effect and efficiency of the covalent immobilization of biomolecules on the sensor surface. The artificially synthesized probe DNA molecules were covalently linked onto the surface of TiO2 film. The hybridization of probe DNA and target DNA was monitored by the recording of I-V curves that shift along the voltage axis during the process of reaction. A significant LAPS signal can be detected at 10 μmol/L of target DNA sample.展开更多
文摘This paper presents a new electromagnetic functional material developed byelectron-less nickel deposition technique, with a single hollow micro-sphere as the core templateand a thin nickel layer as the shell. The micrograph taken by a scanning electron microscope showsthe microstructures of the materials in detail. Scattering parameters of the waveguide sample holderfilled with the materials have been obtained over X band. The electromagnetic parameters computedfrom the measured S parameters show that the material with metallic hollow spheres has as highrelative permeability μ'_r as 19.0 with about 0.6 magnetic loss tangent over the whole bandwidth.Compared to the material with non-metallic spheres, the permeability μ'_r and the magnetic losstangent μ'_r increase greatly, while the permittivity remains lower than 1.8.
基金Supported by the National Basic Research Program of China(2015CB655301)the Jiangsu Natural Science Foundation(BK20150063)+1 种基金the Natural Science Research Program of the Jiangsu Higher Education Institutions(13KJA430005)the Project of Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘Molecular layer deposition （MLD） for the deposition of polyimide （PI） at low temperature of 110 ℃ has been firstly introduced into the field of membrane separation. With the optimized MLD deposition parameters, such low de- position temperature has successfully expanded the application of MLD for the surface modification of polymeric materials. Globular PI particulates grow on both the free surfaces as well as the pore walls of the polypropylene （PP） membranes as isolated islands during progressive precursor exposures. The PI-deposited PP membranes ex- hibit synergistically improved performances in various aspects. Evidently improved surface hydrophilicity and per- meation performance （30%） have been achieved v/a the MLD deposition of polyimide films. The overall separation efficiency maintained higher than 85% even after 250 cycles of MLD deposition. More importantly, the thermal sta- bility has been improved and the integrity of the porous structure for PI-deposited PP membranes has been well preserved even after harsh treatment, which ensures its potential application in industries.
文摘Silica gel impregnated with 1% aqueous solutions of different metal cations （Li^＋, Mg^2＋, Zn^2＋, Cu^2＋, Co^2＋, Ni^2＋, Ba^2＋and Th^4＋） has been used for the analysis of nonionic and cationic surfaetants using simple aqueous acetone as mobile phase system. Co^2＋ was found the most suitable impregnant for the mutual separation of nonionic surfactants （Brij-35 and Brij-57） and cationic from nonionic surfactants （tetmdecyltrimethylammonium bromide and Cween-20）. Zinc sulphate impregnation （Zn^2＋-silica gel） shows identical chromatographic behavior and these layers are useful to separate nonionic surfactant （Brij-35） from cationic surfaetant （cetylpyridinium chloride）. The mutual separation of B J-35 and B J-57 is not influenced by the presence of optical brightener in the sample.
文摘We investigated the higher structure of konjac glucomannan (KGM) in the amorphous state and solution using a laser particle size analyzer and a water activity meter. The results show that the thermodynamic structures of native KGM were primarily composed of the lamella structure units, which involve both granular crystalline and amorphous regions, and that the connection zones of such units contained both loose and tight aggregation regions. The value of surface tension (σ) of native KGM, resting with the density of its hydroxyl groups' self-association, was an important parameter to analyze the higher structures of native KGM in the thermodynamic swelling model of native KGM.
基金Project supported by the National Natural Science Foundation of China (Nos. 30627002 and 60725102)the Interdisciplinary Research Foundation of Zhejiang University (No. 2009-15), China
文摘Titanium dioxide (TiO2) thin film was deposited on the surface of the light addressable potentiometric sensor (LAPS) to modify the sensor surface for the non-labeled detection of DNA molecules. To evaluate the effect of ultraviolet (UV) treatment on the silanization level of TiO2 thin film by 3-aminopropyltriethoxysilane (APTS),fluorescein isothiocyanate (FITC) was used to label the amine group on the end of APTS immobilized onto the TiO2 thin film. We found that,with UV irradiation,the silanization level of the irradiated area of the TiO2 film was improved compared with the non-irradiated area under well-controlled conditions. This result indicates that TiO2 can act as a coating material on the biosensor surface to improve the effect and efficiency of the covalent immobilization of biomolecules on the sensor surface. The artificially synthesized probe DNA molecules were covalently linked onto the surface of TiO2 film. The hybridization of probe DNA and target DNA was monitored by the recording of I-V curves that shift along the voltage axis during the process of reaction. A significant LAPS signal can be detected at 10 μmol/L of target DNA sample.
