螺旋双曲面齿轮修形及啮合特性

为了改善螺旋双曲面齿轮啮合特性,对小轮齿面进行修形设计.用抛物线齿廓的产形齿条展成修形插齿刀齿面,模拟插齿刀和被加工齿轮的啮合运动关系,建立齿轮齿面的数学模型;根据两齿面在啮合过程中连续相切条件,建立了考虑安装误差的轮齿接触分析(TCA)模型;齿轮副的啮合仿真结果表明,刀具齿廓抛物线修形可以获得中凸的抛物线传动误差,调整修形参数可改变传动误差幅值和对称性;轴交角的变化影响齿轮副的重合度、接触椭圆、安装误差敏感性.

Tooth surface error correction of hypoid gears machined by duplex helical method

In this work,synchronous cutting of concave and convex surfaces was achieved using the duplex helical method for the hypoid gear,and the problem of tooth surface error correction was studied.First,the mathematical model of the hypoid gears machined by the duplex helical method was established.Second,the coordinates of discrete points on the tooth surface were obtained by measurement center,and the normal errors of the discrete points were calculated.Third,a tooth surface error correction model is established,and the tooth surface error was corrected using the Levenberg-Marquard algorithm with trust region strategy and least square method.Finally,grinding experiments were carried out on the machining parameters obtained by Levenberg-Marquard algorithm with trust region strategy,which had a better effect on tooth surface error correction than the least square method.After the tooth surface error is corrected,the maximum absolute error is reduced from 30.9μm before correction to 6.8μm,the root mean square of the concave error is reduced from 15.1 to 2.1μm,the root mean square of the convex error is reduced from 10.8 to 1.8μm,and the sum of squared errors of the concave and convex surfaces was reduced from 15471 to 358μm^(2).It is verified that the Levenberg-Marquard algorithm with trust region strategy has a good accuracy for the tooth surface error correction of hypoid gear machined by duplex helical method.

Virtual System Solution of CNC Machine for Spiral Bevel and Hypoid Gears

A virtual computerized numerical control C CNC） processing system is built for spiral bevel and hypoid gears. The pre-designed process of the solution to locate the way of realization is investigated. A kind of combined programming method and principle of solid modeling are chosen. Multienvironmental programming thought and the inter-connected mechanisms between different environments are applied in the proposed system. The problems of data exchange and compatibility of modules are settled. Environment of the system is founded with object oriented programming thought. AutoCAD is located as the graphic environment. Matlab is used for editing the computation module. Virtual C ＋＋6.0 is the realization environment of the main module. Windows is the platform for realizing the multi-environmental method. Through establishing the virtual system based windows message handling mechanism and the component object model, the application of multienvironmental programming is realized in the manufacture system simulation. The virtual gear product can be achieved in the accomplished software.

Tooth surface geometry optimization of spiral bevel and hypoid gears generated by duplex helical method with circular profile blade

In order to effectively improve meshing performance of spiral bevel and hypoid gears generated by the duplex helical method, the effects of straight lined and circular cutting edges profile on meshing and contact of spiral bevel and hypoid gears were investigated analytically. Firstly, a mathematical model of spiral bevel and hypoid gears with circular blade profile was established according to the cutting characteristics of the duplex helical method. Based on a hypoid gear drive, the tooth bearings and the functions of transmission errors of four design cases were analyzed respectively by the use of the tooth contact analysis(TCA), and the contact stresses of the four design cases were analyzed and compared using simulation software. Finally, the curvature radius of the circular profile blade was optimized. The results show that the contact stresses are availably reduced, and the areas of edge contact and severe contact stresses can be avoided by selecting appropriate circular blade profile. In addition, the convex and concave sides are separately modified by the use of different curvature radii of inside and outside blades, which can increase the flexibility of the duplex helical method.

NC Machining of Spiral Bevel Gear and Hypoid Gear Based on Unity Transformation Model

A unity transformation model (UTM) was presented for flexible NC machining of spiral bevel gears and hypoid gears. The model can support various machining methods for Gleason spiral bevel gears and hypoid gears, including generation machining and formation machining for wheel or pinion on a universal five-axis machining center, and then directly produce NC codes for the selected machining method. Wheel machining and pinion machining under UTM were simulated in Vericut 6.0 and tested on a five-axis machining center TDNC-W2000 with NC unit TDNC-H8. The results from simulation and real-cut verify the feasibility of gear machining under UTM as well as the correctness of NC codes.