Propeller blade width measurement has been extensively studied in the past using direct and indirect methods, and it plays a great role in determining the quality of the finished products. It has surveyed that previou...Propeller blade width measurement has been extensively studied in the past using direct and indirect methods, and it plays a great role in determining the quality of the finished products. It has surveyed that previous techniques are usually time-consuming and erroneous due to a large number of points to be processed in blade width measurement. This paper proposes a new method of measuring blade width using two images acquired from different viewpoints of the same blade. And a new feature points matching approach for propeller blade image is proposed in stereo vision measurement. Based on these, pixel coordinates of contour points of the blade in two images are extracted and converted to real world coordinates by image algorithm and binocular stereo machine vision theory. Then, from the real world coordinates, the blade width at any position can be determined by simple geometrical method.展开更多
This paper presents the characteristics of a double helix capacitance sensor for measurement of the liquid holdup in horizontal oil–water two-phase flow. The finite element method is used to calculate the sensitivity...This paper presents the characteristics of a double helix capacitance sensor for measurement of the liquid holdup in horizontal oil–water two-phase flow. The finite element method is used to calculate the sensitivity field of the sensor in a pipe with 20 mm inner diameter and the effect of sensor geometry on the distribution of sensitivity field is presented. Then, a horizontal oil–water two-phase flow experiment is carried out to measure the response of the double helix capacitance sensor, in which a novel method is proposed to calibrate the liquid holdup based on three pairs of parallel-wire capacitance probes. The performance of the sensor is analyzed in terms of the flow structures detected by mini-conductance array probes.展开更多
We numerically study the dynamics of meandering spiral waves in the excitable system subjected to a feedback signal coming from two measuring points located on a straight line together with the initial spiral core. Th...We numerically study the dynamics of meandering spiral waves in the excitable system subjected to a feedback signal coming from two measuring points located on a straight line together with the initial spiral core. The core location and size radius of the final attractors are computed, and they change with the position of the moving measuring point in a unique way. By the Fourier Spectral analysis, we find the frequency-locked behaviors different from the driving scheme of the external periodic force. It when the moving measuring point approaches closely is also found that the meandering spiral wave can be eliminated the boundary and its feedback gain is large enough. This offers an effective and convenient method for eliminating meandering spiral waves.展开更多
In this work,synchronous cutting of concave and convex surfaces was achieved using the duplex helical method for the hypoid gear,and the problem of tooth surface error correction was studied.First,the mathematical mod...In this work,synchronous cutting of concave and convex surfaces was achieved using the duplex helical method for the hypoid gear,and the problem of tooth surface error correction was studied.First,the mathematical model of the hypoid gears machined by the duplex helical method was established.Second,the coordinates of discrete points on the tooth surface were obtained by measurement center,and the normal errors of the discrete points were calculated.Third,a tooth surface error correction model is established,and the tooth surface error was corrected using the Levenberg-Marquard algorithm with trust region strategy and least square method.Finally,grinding experiments were carried out on the machining parameters obtained by Levenberg-Marquard algorithm with trust region strategy,which had a better effect on tooth surface error correction than the least square method.After the tooth surface error is corrected,the maximum absolute error is reduced from 30.9μm before correction to 6.8μm,the root mean square of the concave error is reduced from 15.1 to 2.1μm,the root mean square of the convex error is reduced from 10.8 to 1.8μm,and the sum of squared errors of the concave and convex surfaces was reduced from 15471 to 358μm^(2).It is verified that the Levenberg-Marquard algorithm with trust region strategy has a good accuracy for the tooth surface error correction of hypoid gear machined by duplex helical method.展开更多
基金Supported by the Natural Science Foundation of China (50975133)the Innovative Foundation for Ph.D of the Jiangsu Province, China (2010-227)
文摘Propeller blade width measurement has been extensively studied in the past using direct and indirect methods, and it plays a great role in determining the quality of the finished products. It has surveyed that previous techniques are usually time-consuming and erroneous due to a large number of points to be processed in blade width measurement. This paper proposes a new method of measuring blade width using two images acquired from different viewpoints of the same blade. And a new feature points matching approach for propeller blade image is proposed in stereo vision measurement. Based on these, pixel coordinates of contour points of the blade in two images are extracted and converted to real world coordinates by image algorithm and binocular stereo machine vision theory. Then, from the real world coordinates, the blade width at any position can be determined by simple geometrical method.
基金Supported by the National Natural Science Foundation of China(50974095,41174109,61104148)the National Science and Technology Major Projects(2011ZX05020-006)
文摘This paper presents the characteristics of a double helix capacitance sensor for measurement of the liquid holdup in horizontal oil–water two-phase flow. The finite element method is used to calculate the sensitivity field of the sensor in a pipe with 20 mm inner diameter and the effect of sensor geometry on the distribution of sensitivity field is presented. Then, a horizontal oil–water two-phase flow experiment is carried out to measure the response of the double helix capacitance sensor, in which a novel method is proposed to calibrate the liquid holdup based on three pairs of parallel-wire capacitance probes. The performance of the sensor is analyzed in terms of the flow structures detected by mini-conductance array probes.
基金Supported by the National Natural Science Foundation of China under Grant No. 11005030Science Foundations of Hebei Education Department under Grant No. 2009135+1 种基金Science Foundations of Inner Mongolia Education Department under Grant No. NJ09178Science Foundation of Hebei Normal University
文摘We numerically study the dynamics of meandering spiral waves in the excitable system subjected to a feedback signal coming from two measuring points located on a straight line together with the initial spiral core. The core location and size radius of the final attractors are computed, and they change with the position of the moving measuring point in a unique way. By the Fourier Spectral analysis, we find the frequency-locked behaviors different from the driving scheme of the external periodic force. It when the moving measuring point approaches closely is also found that the meandering spiral wave can be eliminated the boundary and its feedback gain is large enough. This offers an effective and convenient method for eliminating meandering spiral waves.
基金Projects(52075552,51575533,51805555,11662004)supported by the National Natural Science Foundation of China。
文摘In this work,synchronous cutting of concave and convex surfaces was achieved using the duplex helical method for the hypoid gear,and the problem of tooth surface error correction was studied.First,the mathematical model of the hypoid gears machined by the duplex helical method was established.Second,the coordinates of discrete points on the tooth surface were obtained by measurement center,and the normal errors of the discrete points were calculated.Third,a tooth surface error correction model is established,and the tooth surface error was corrected using the Levenberg-Marquard algorithm with trust region strategy and least square method.Finally,grinding experiments were carried out on the machining parameters obtained by Levenberg-Marquard algorithm with trust region strategy,which had a better effect on tooth surface error correction than the least square method.After the tooth surface error is corrected,the maximum absolute error is reduced from 30.9μm before correction to 6.8μm,the root mean square of the concave error is reduced from 15.1 to 2.1μm,the root mean square of the convex error is reduced from 10.8 to 1.8μm,and the sum of squared errors of the concave and convex surfaces was reduced from 15471 to 358μm^(2).It is verified that the Levenberg-Marquard algorithm with trust region strategy has a good accuracy for the tooth surface error correction of hypoid gear machined by duplex helical method.
