HL-2M装置中心螺旋管线圈结构和制造工艺概述

HL-2M装置中心螺旋管(CS)线圈采用了AB两组交替缠绕、内外层轴向反向绕制的结构,AB两组引线对称引出。在中心螺旋管线圈制造过程中,开展了中空铜导线焊接工艺、绝缘包扎工艺、绕制工艺、内外层跳线连接工艺、加热固化工艺等试验。研制的线圈满足对地主绝缘耐压60kV、A/B组匝间耐压1kV的设计要求。

经颅磁刺激线圈的磁聚焦优化设计

经颅磁刺激是利用变化磁场产生的感应电场作用于可兴奋人体脑组织的过程,磁聚焦性能是经颅磁刺激线圈设计的一项重要指标。根据磁刺激线圈感应电场理论,我们设计了半圆螺线管用于经颅磁刺激,计算了其载流线圈随刺激深度的感应电场分布,并与传统的经颅磁刺激8字形线圈作比较。结果表明,半圆螺旋管线圈既继承了8字形线圈感应电场的主瓣聚焦性强的优良特性,又摒弃了其相对较大的旁瓣对浅表非靶组织的兴奋刺激的不良影响,完全达到了磁聚焦优化设计的目的,也更利于磁刺激兴奋点的定位。

线性测微电感的精化

为提高测微电感传感器的测量精度,提出了基于赫姆霍兹线圈理论设计螺线管线圈的方法,改善了螺线管线圈内轴向上磁场的分布均匀性。首先,分析了螺线管线圈模型,建立了螺线管线圈参数与轴向磁场强度分布相互关系的广义函数模型。然后,通过线圈与磁芯的尺寸确定了系统轴向磁场强度分布函数模型,结合磁芯移动区间范围设置磁场均匀度最小误差目标函数,通过对目标函数寻优得到各螺线管线圈的各项参数。最后,搭建了测微电感传感器的测试系统,测试了传感器性能。实验结果表明:与传统线圈相比,改进型螺线管线圈在100μm测量范围内的线性度由0.46%提高到0.30%。实验显示通过对不同规格的螺线管线圈进行组合,可使得螺线管内轴向上磁场强度分布均匀,从而提高了测量精度。

Experimental Verification to Estimate Ground Thermal Conductivity Using Spiral Coil Type Ground Heat Exchangers

This paper presents an experimental study on the evaluation of thermal response of a spiral coil type GHE （ground heat exchanger）. This GHE was installed on partially saturated landfill ground that was composed of silt and clay in the runway area of Incheon International airport. TRT （thermal response test） was conducted for more than 65 hours under continuous operation conditions. Ground thermal conductivity was derived based on line source theory, which has usually been found to be appropriate for line type GHEs such as U, W and 2U types. A reasonable method to derive ground thermal conductivity using the infinite line source theory for a spiral coil type GHE was introduced. Ground thermal conductivity from the TRT using spiral coil type GHE was compared with those from the analytical equivalent model of ground thermal conductivity.