Creep aging behavior of retrogression and re-aged(RRAed)7150 aluminum alloy(AA7150)was systematically investigated using the creep aging experiments,mechanical properties tests,electrical conductivity tests and transm...Creep aging behavior of retrogression and re-aged(RRAed)7150 aluminum alloy(AA7150)was systematically investigated using the creep aging experiments,mechanical properties tests,electrical conductivity tests and transmission electron microscope(TEM)observations.Creep aging results show that the steady-state creep mechanism of RRAed alloys is mainly dislocation climb(stress exponent≈5.8),which is insensitive to the grain interior and boundary precipitates.However,the total creep deformation increases over the re-aging time.In addition,the yield strength and tensile strength of the four RRAed samples are essentially the same after creep aging at 140℃ for 16 h,but the elongation decreases slightly with the re-aging time.What’s more,the retrogression and re-aging treatment are beneficial to increase the hardness and electrical conductivity of the creep-aged 7150 aluminum alloy.It can be concluded that the retrogression and re-aging treatment before creep aging forming process can improve the microstructure within grain and at grain boundary,forming efficiency and comprehensive performance of mechanical properties and electrical conductivity of 7150 aluminum alloy.展开更多
The torsional fretting wear tests of 7075 aluminum alloy flat against 52100 steel ball in dry condition were carried out on a new high-precision torsional fretting-wear tester.The kinetics behaviors and damage mechani...The torsional fretting wear tests of 7075 aluminum alloy flat against 52100 steel ball in dry condition were carried out on a new high-precision torsional fretting-wear tester.The kinetics behaviors and damage mechanism of 7075 aluminum alloy under different angular displacement amplitudes were investigated in detail.The results show that the torsional fretting running behaviors of 7075 aluminum alloy can be defined by three fretting regimes(i.e.partial slip regime(PSR),mixed fretting regime(MFR) and slip regime(SR)) with the increase of angular displacement amplitudes.In PSR,the damage occurs at the lateral portion of the contact zone with a slight annular shape.However,in MFR and SR,more severe damages are observed and the debris layer covers the wear scars.Friction torque and dissipation energy which are strongly dependent upon the imposed angular displacement amplitudes and presented in three stages were discussed in detail.The mechanisms of torsional fretting wear of aluminum alloy are mainly oxidative wear,abrasive wear and delamination in the three fretting regimes.In addition,the oxidative debris plays an important role during the torsional fretting wear processes.展开更多
We report a phenomenon of asymmetric evolution of two two-level atoms which results from pump laser phase based on the model of[Phys.Rev.Lett.101(2008) 153601].Other than investigating the dynamical behavior of whole ...We report a phenomenon of asymmetric evolution of two two-level atoms which results from pump laser phase based on the model of[Phys.Rev.Lett.101(2008) 153601].Other than investigating the dynamical behavior of whole system,in this paper we investigate the effects of the pump laser phase on dynamic behavior of each atom.We find that two atoms show asymmetry both in time evolution of(population) excitation probability and quantum correlation with environment due to the quantum interference induced by pump laser phase as well as the dipole-dipole interaction.These phenomena are deeply related to the dynamical behavior of the whole system,therefore we can understand the dynamical behavior of whole system caused by pump laser phase from this point of view.展开更多
基金Project(2017YFB0306300)supported by the National Key Research and Development Program of ChinaProject(2017ZX04005001)supported by the National Science and Technology Major Project,China+2 种基金Project(JCKY2014203A001)supported by National Defense Program of ChinaProjects(51905551,51675538,51601060)supported by the National Natural Science Foundation of ChinaProjects(Kfkt2018-03,zzYJKT2019-11)supported by State Key Laboratory of High-Performance Complex Manufacturing,China。
文摘Creep aging behavior of retrogression and re-aged(RRAed)7150 aluminum alloy(AA7150)was systematically investigated using the creep aging experiments,mechanical properties tests,electrical conductivity tests and transmission electron microscope(TEM)observations.Creep aging results show that the steady-state creep mechanism of RRAed alloys is mainly dislocation climb(stress exponent≈5.8),which is insensitive to the grain interior and boundary precipitates.However,the total creep deformation increases over the re-aging time.In addition,the yield strength and tensile strength of the four RRAed samples are essentially the same after creep aging at 140℃ for 16 h,but the elongation decreases slightly with the re-aging time.What’s more,the retrogression and re-aging treatment are beneficial to increase the hardness and electrical conductivity of the creep-aged 7150 aluminum alloy.It can be concluded that the retrogression and re-aging treatment before creep aging forming process can improve the microstructure within grain and at grain boundary,forming efficiency and comprehensive performance of mechanical properties and electrical conductivity of 7150 aluminum alloy.
基金Project(2007CB714704) supported by the National Basic Research Program of ChinaProjects(50775192,50821063) supported by the National Natural Science Foundation of China
文摘The torsional fretting wear tests of 7075 aluminum alloy flat against 52100 steel ball in dry condition were carried out on a new high-precision torsional fretting-wear tester.The kinetics behaviors and damage mechanism of 7075 aluminum alloy under different angular displacement amplitudes were investigated in detail.The results show that the torsional fretting running behaviors of 7075 aluminum alloy can be defined by three fretting regimes(i.e.partial slip regime(PSR),mixed fretting regime(MFR) and slip regime(SR)) with the increase of angular displacement amplitudes.In PSR,the damage occurs at the lateral portion of the contact zone with a slight annular shape.However,in MFR and SR,more severe damages are observed and the debris layer covers the wear scars.Friction torque and dissipation energy which are strongly dependent upon the imposed angular displacement amplitudes and presented in three stages were discussed in detail.The mechanisms of torsional fretting wear of aluminum alloy are mainly oxidative wear,abrasive wear and delamination in the three fretting regimes.In addition,the oxidative debris plays an important role during the torsional fretting wear processes.
基金Supported by the National Natural Science Foundation of China under Grant No.11174109
文摘We report a phenomenon of asymmetric evolution of two two-level atoms which results from pump laser phase based on the model of[Phys.Rev.Lett.101(2008) 153601].Other than investigating the dynamical behavior of whole system,in this paper we investigate the effects of the pump laser phase on dynamic behavior of each atom.We find that two atoms show asymmetry both in time evolution of(population) excitation probability and quantum correlation with environment due to the quantum interference induced by pump laser phase as well as the dipole-dipole interaction.These phenomena are deeply related to the dynamical behavior of the whole system,therefore we can understand the dynamical behavior of whole system caused by pump laser phase from this point of view.
