粘弹性材料特慢蠕变的局部结构导数本构模型

为描述粘弹性材料特慢力学行为,该文给出了局部结构导数本构模型。该模型以ln^(α)(1+t/τ_(0))为结构函数,物理意义清楚,能够准确描述粘弹性材料特慢力学行为的对数律依赖现象。传统整数阶和分形导数本构模型均不能描述粘弹性材料的特慢力学行为。目前,常用于粘弹性材料特慢力学行为的模型是Lomnitz模型,但该模型是一个经验本构,物理意义不清楚。为比较这4类模型在描述特慢力学行为上的差异,文章以混凝土的特慢蠕变过程为例,结合不同实验条件下的蠕变实验数据,验证了局部结构导数模型在刻画特慢蠕变行为的可行性和有效性。此外,文章也给出了特慢蠕变的局部结构导数Kelvin本构模型,并与上述的局部结构导数Maxwell本构模型进行了对比分析,给出了不同模型的适用范围。

论我国对“伊吉拉特”恐怖活动犯罪的刑法规制

"伊吉拉特"行为是我国跨境流动恐怖活动犯罪的常见形式,不光在国内造成了严重危害,对国际社会同样形成巨大威胁,具有刑事处罚的必要性。"伊吉拉特"行为虽然具有出境的外在表现形式,但因其不法与答责性程度远远超出偷越国(边)境罪可能涵盖的范围,所以不应当以偷越国(边)境罪的原刑法条文予以规制,《刑法修正案(九)》将该行为视为恐怖活动犯罪的预备犯,从而加重处罚,具有处断上的合理性。

HIERARCHIC GREY QUASI-PREFERRED ANALYSIS MODEL AND ITS APPLICATION

The grey quasi-preferred analysis (GQPA) is one of important methods for realizing system analysis to conquer the limitations of the existing GQPA model, without any considerations to the difference of the different behavioral factor′s importance. It could not be used to analyze the complex system with multi-hierarchy correlation factors, the weighted synthetic method for calculating abstract incidence degrees between the system beha-vioral characteristics and correlative factors in different hierarchies is given out,and the hierarchic grey quasi-preferred analysis (HGQPA) model is established. The effectiveness of the HGQPA model is tested by the scientific-technical system of Jiangsu Province. The depth and the range of the application of GQPA are developed, and the HGQPA model is regarded as a new approach to systemically analyze the complex systems with multi-hierarchy correlation factors.

SIMULATION STUDY OF CHAOS IN DC-DC CONVERTER

A DC DC buck converter c on trolled by naturally sampled, constant frequency PWM is considered. The existe nce of chaotic solutions and the output performance of the system under differen t circuit parameters are studied. The transforming pattern of system behavior fr om steady state to chaotic is discovered by the cascades of period doubling bi furcation and the cascades of periodic orbit in V I phase space. Accordingl y, it is validated that change of values of the circuit parameters may lead DC DC converter to chaotic motion. Performances of the output ripples fro m steady state to chaotic are analyzed in time and frequency domains respective ly. Some important conclusions are helpful for opt imization design of DC DC converter.

Action recognition using a hierarchy of feature groups

To improve the recognition performance of video human actions,an approach that models the video actions in a hierarchical way is proposed. This hierarchical model summarizes the action contents with different spatio-temporal domains according to the properties of human body movement.First,the temporal gradient combined with the constraint of coherent motion pattern is utilized to extract stable and dense motion features that are viewed as point features,then the mean-shift clustering algorithm with the adaptive scale kernel is used to label these features.After pooling the features with the same label to generate part-based representation,the visual word responses within one large scale volume are collected as video object representation.On the benchmark KTH（Kungliga Tekniska H？gskolan）and UCF （University of Central Florida）-sports action datasets,the experimental results show that the proposed method enhances the representative and discriminative power of action features, and improves recognition rates.Compared with other related literature,the proposed method obtains superior performance.

在语文教学中培养智障学生的创造力

一、提高智障学生的合作能力智障学生面对的最基本的难题就是如何与人沟通、进行思想情感交流及合作交往。创造力的形成也往往与合作交流密不可分。俗话说:"三个臭皮匠,赛过诸葛亮",合作对于智障学生的重要性更加显著。《培智学校义务教育课程设置实验方案》指出。

Ontogenetic development in the morphology and behavior of loach(Misgurnus anguillicaudatus) during early life stages

Loach （Misgurnus anguillicaudatus） is a commercially important fish in China and an ideal aquaculture species. However, culturists experience high larval and juvenile mortality during mass production. To provide insight into ways to improve larviculture techniques, we describe the morphological characteristics and behavior of loach during the larval and early juvenile stages. Yolksae larvae ranged from 2.8 to 4.0 mm body length （BL） between days 0 to 4; preflexion larvae ranged from 3.6 to 5.5 mm BL between days 4 to 6; flexion larvae ranged from 4.8 to 8.1 mm BL between days 5 and 14; and post-flexion larvae ranged from 7. l to 15.7 mm BL between days 11 to 27; the minimum length and age of juveniles was 14.1 mm BL and 23 d, respectively. Loach are demersal from hatch through to the early juvenile stages. A suite of morphological characteristics （e.g., external gill filament and ventral mouth opening） and behavioral traits have developed to adapt to demersal living. We observed positive allometric growth in eye diameter, head length, head height, and pectoral fin length during the early larval stages, reflecting the priorities in the development of the organs essential for survival. Our results provide a basis for developing techniques to improve the survival of larval and juvenile loach during mass production.

Effects of photoperiod on daily activity rhythm of juvenile sea cucumber, Apostichopus japonicus (Selenka)

In nature, Apostichopus japonicus exhibits a behavioral characteristic of emerging at night and sheltering during the day. Hence, it was commonly believed that longer and darker light conditions are better for a population of A. japonicus. In aquaculture situations therefore, animals have commonly been cultured without lighting, especially during juvenile-hatching culture. However, how the length of darkness each day affects .4.japonicus and what the mechanism is of behavioral response of A. japonicus to different photoperiods remain unclear, and are specifically addressed in this study. We applied nine photoperiod treatments （light：dark （LD） cycles at 0：24, 3：21, 6：18, 9：15, 12：12, 15：9, 18：6, 21：3, and 24：0 under 500Ix） to 60 individuals （29.73±0.23 g） per treatment （with 3 replicates）. The enviroramental conditions were set as： water temperature = 16.9±0.3℃, dissolved oxygen〉6.0 rag/L, ammonia〈0.3 mg/L, pH=7.8-8.2, and salinity=30-32. Under experimental conditions of continuous darkness as well as continuous light, cyclic nocturnal activity patterns of A. japonicus （viz. the animals emerged and fed at night and sheltered during the day） were observed. However, they spent more and less time, respectively, moving and feeding under continuous darkness and continuous light, than those under a natural light cycle. Under photoperiods with 6-12 h of light, the animals showed one sheltering behavior transition and two emerging behavior transitions. These behavior transitions appeared to be governed by some internal physiological factors and induced by daily light variation. The behavior of the animals was significantly affected by different photoperiods, and the distribution rate （DR） of the animals emerging at ＂daytime＂ increased with lengthening ＂light time＂ （except for the LD 3：21 cycle）. We also found that there was no significant difference in mean DR per day under LD cycles of 6：18, 9：15, 15：9, and 12：12. Mean DRs per day were significantly lower for these photoperiods, than for those under LD cycles of 0：24 and 3：21, and significantly higher than for those under LD cycles of 18：6, 21：3 and 24：0. These results imply that 6-15 h light per day were the similar photoperiods to natural sunlight. From the viewpoint of activity and feeding behaviors, these might be the optimal photoperiods for rearing A. japonicus.

Effects of behavioral characteristics of taxi drivers on safety and capacity of signalized intersections

Comparative analyses were conducted to compare the effects of the behavioral characteristics of the drivers of taxis and private cars on the capacity and safety of signalized intersections. Data were collected at sixteen signalized intersections in the Nanjing area in China. The risk-taking behaviors of the drivers of taxis and private cars were compared. The results suggest that 19.9% of taxi drivers have committed at least one of the identified risky behaviors, which is 2.37 times as high as that of the drivers of private cars(8.4%). The traffic conflicts technique was used to estimate the safety effects of taxis and private cars. The overall conflict rate for taxis is 21.4% higher than that for private cars, implying that taxis are more likely to be involved in conflicts. Almost all of the identified traffic conflicts can be attributed to certain levels of risk-taking behaviors committed by either taxi drivers or the drivers of private cars, and taxi drivers are more likely to be at fault in a conflict. Failure to yield to right-of-way and improper lane change is the leading causes of the conflicts in which taxis are at-fault. The research team further studied the effects of taxis on the queue discharge characteristics at signalized intersections. The results show that the presence of taxis significantly reduces both start-up lost time and saturation headways. The effects of taxis on saturation flow rates are dependent on the proportion of taxis in the discharge flow, and the saturation flow rates increase with the increase in the proportion of taxis. The adjustment factors for various proportions of taxis for different turning movements are then calculated to quantitatively evaluate the effects of taxis on the capacity of signalized intersections.

A New Study on Combustion Behavior of Pine Sawdust Characterized by the Weibull Distribution

An isothermal operation is implemented by employing a thermogravimetric analyzer (TGA) for simulating the thermal decomposition behavior of 58μm pine sawdust in air atmosphere.An independent parallel reaction model is adopted in this study to describe the thermal decomposition mechanism.The Weibull distribution function is used to record and analyze the weight loss during isothermal decomposition at different temperatures(500,600,700,and 800°C).The total weight loss of the pine sawdust is assumed as a linear combination of individual weight loss from three components,including the char and two volatile matters.The plot of the thermal decomposition rate curve leads to kinetic parameters such as the reaction rate constants and the reaction order.The results show that the Weibull distribution function successfully represents decomposition curves of three components,and fits the experimental data very well.Therefore,this study provides a simple way to evaluate the decomposition rate of biomass combustion in a real combustor.

Comparison of Behavioral Characteristics between Korean Native Chickens and Commercial Broilers

Commercial broilers （CB） have been generally reared in Korea; however, Korean native chicken （KNC） is also bred for meat production. This study was performed to evaluate the behavioral characteristics of Korean native chickens （Han-hyup） and commercial broilers （Ross 308）. In the study, KNC and CB were separately housed in 4 pens （30 birds/pen）, so there were two replicates for each treatment. Chickens were observed by video recording throughout the 8 weeks growth period for 12 hours each day. The time spent （standing, sitting, and walking） and frequencies （drinking, feeding, preening, dust-bathing, flapping, aggressive pecking, and ground pecking） of chicken＇s behavior were evaluated. Behavior was compared between the earlier period （1 to 4 weeks） and the later one （5 to 8 weeks） to know the changes in each behavior as they matured. Results showed that more time was spent on standing by KNC than CB. On the contrary, time spent for sitting behavior was less in KNC. The frequencies of most behaviors in KNC were higher than CB in the earlier period except feeding and dust-bathing. The greatest decreasing behavior as they matured was walking in both treatments, and a large number of commercial broilers did not walk, but instead rested as days passed. Feeding behavior of CB was more frequent in the earlier stage, but gradually reversed in the later period. The active behaviors such as fe, eding, preening, pecking, flapping and aggressive pecking in the KNC group were higher than the CB group, declining as time passed in both treatments; except dust-bathing that showed opposite pattern. These results were showed that KNC are much more active compared to CB, especially for walking, preening and pecking behavior. This may conclude that they may have fewer tendencies to develop potential health problems like dermatitis or even disease like sudden death syndrome.

The Behavior of Amphiphile at Oil-Water Interface by Monte Carlo Simulation

A novel simple two-dimensional square-lattice model of amphiphile at oil-water interface is developed,in which oil and water act as solvent and occupy empty sites and amphiphile occupies chains of sites. In this model, the oil-water interface is fixed, And amphiphile molecules will be enriched at the oil-water interface. The interfacial concentration of amphiphile calculated by Monte Carlo method shows that it is easier for the hydrophilic-hydrophobic balanced amphiphile to stay at the interface. And the adsorption of amphiphile increases with the increase of amphiphile concentration and the decrease with temperature.

Curing and mechanical property of single-componentpolyurethane porous elastic mixture

The viscosity-time curve of a single-component polyurethane(PU)was examined to determine the mixing and compacting temperatures of its mixture and investigate the curing and mechanical properties of single-component PU porous elastic mixture(PPEM).The curing properties of the single-component PU and PPEM were studied with Fourier transform infrared spectroscopy(FTIR)and Marshall test.The mechanical properties of PPEM were explored via the following tests:rutting test,3-point bending test,soaked Marshall stability test,freeze-thaw splitting test,and Cantabro test.The effects of a water bath on the stability of aggregate-PU/asphalt mortar-aggregate systems were evaluated through a pull-out test and a shear test.The results show that the recommended mixing temperatures of toluene diisocyanate and methylene diphenyl diisocyanate range from 75 to 80℃and from 64 to 68℃,respectively.Room temperature(25℃)can be adopted as the compacting temperature of PPEM.PPEM can be fully cured in 4 d.Nevertheless,the water sprinkle method can obviously shorten the full curing time of PPEM.PPEM exhibites good resistance to rutting,brittle cracking,and raveling.The adhesive and shear strength of aggregate-PU/asphalt mortar-aggregate systems are negatively related to water bath duration.

Research on key technologies in design of middle pylon of Taizhou Bridge

At the middle pylon of a three-pylon two-span suspension bridge, the effect of unbalanced loads on the adjacent spans may result in a series of technical bottlenecks in design, such as stability and anti-slippage between saddles and main cables. This article presents the researches conducted on structure selection and behavior characteristics of middle pylon, interaction mechanism between main cables and saddles and their anti-slippage safety performance, elastic and plastic stability analysis and safety assessment of steel middle pylon, and fatigue design load and method for steel pylon of Taizhou Bridge. According to the research results, a longitudinal inverted Y shape steel middle pylon is used in design, effectively solving many technical difficulties, and this type of pylon has become a suitable middle pylon structural form for many three-ovlon two-soan susoension bridges.

Resistivity and thermal infrared precursors associated with cemented backfill mass

The stability of cemented backfill mass is important to keep miners and equipment safe in underground backfill miming.The stress-strain behavior, resistivity and thermal infrared(TIR) characteristics of backfill mass under uniaxial compression were investigated. The monitoring system consisted of a TIR observation system, a stress-strain monitoring system and a resistivity measurement system. Precursory information for impending failure of cemented backfill mass was collected, including TIR, strain and resistivity precursors. The sensitivity and difference of different monitoring information to the same failure event were compared.The results show that the time-space evolution process of the resistivity and TIR is basically the same as the whole process from compression deformation to failure of backfill mass, and the time variation of resistivity and TIR is obviously characterized by stage.The resistivity precursor turns out earlier than the TIR and the strain. The resistivity relation with loading compression is anti-symmetry, decreasing as the compression stress increases before the peak strength of backfill mass. However, when the backfill mass enters into the phase of failure, the resistivity starts to increase as the stress increases. The change of the resistivity growth direction can be regarded as the resistivity-caution-point for the failure of backfill mass under uniaxial compression. It is also indicated that the TIR information mainly represents the surface temperature evolution in the process of compression before the backfill enters into the plastic-yield state. It can be a valuable tool to obtain the precursors for failure of cemented backfill mass for backfill mines.

Degradation of joint surface morphology, shear behavior and closure characteristics during cyclic loading

In order to investigate the failure mechanism of rock joint,a series of laboratory tests including cyclic direct shear tests under constant normal load(CNL)conditions were conducted.Morphology parameters of the rock joint surface were precisely calculated by means of a three-dimensional laser scanning machine.All test results were analyzed to investigate the shear behavior and normal displacement behavior of rock joints under CNL conditions.Degradation of rock joint surface during cyclic shear tests was also analyzed.The comparison results of the height parameters and the hybrid parameters of the joint surface during cyclic tests show that the degradation of the surface mostly happens in the first shear and the constant normal loads imposed on the joints have significant promotion effects on the morphology degradation.During cyclic shear tests,joints surfaces evolve from rough state to smooth state but keep an overall undulation.Dilatancy of rock joints degrades with the degradation of joint surface and the increase of normal loads.The closure deformation of joint is larger than that of the intact rock,and the normal stiffness increases with the increase of shearing times.

Creep characteristic simulation of deep soft rock roadway and long-term mechanical analysis of lining support

By the generalized Kelvin creep model,rheological characteristics of deep softrock and long-term mechanical behaviors of support structures were simulated.Mechanicaldeformation characteristics of support structures under different lining circumstanceswere also analyzed on the basis of deducing the relationship between the generalizedKelvin creep model and implicit creep equations in ANSYS FEM software.The resultsshow that high stress of deep tunnels is the main factor in creep damage;the surroundingrock's deformation binding effect due to lining increases as the thickness increases but theeffect becomes very weak when it increases to a certain value;contact pressure on thelining decreases as its thickness decreases.

Electrochemical dissolution and passivation of laser additive manufactured Ti6Al4V controlled by elements segregation and phases distribution

The electrochemical dissolution and passivation of laser additive manufactured Ti6Al4V were investigated through Tafel polarization,potentiostatic polarization and AC impedance measurements.The results show that the solution treatment−aging(STA)process aggravates the element micro-segregation compared to the annealing process,leading to varied Al and V contents of the phases from different samples.It is proven that either Al-rich or V-rich condition can highly affect the electrochemical dissolution behaviors due to thermodynamical instability caused by element segregation.The dissolution rate in the metastable passivation process is controlled by the stability of the produced film that is affected by phases distribution,especially the difficult-to-dissolve phase.And then,the dissolution rate of the phases in the transpassivation region is consistent with the rank in the activation process because the dense film is not capable of being produced.Compared to the annealed sample,the higher dissolution rate of the STA sample is beneficial to the electrochemical machining(ECM)of Ti6Al4V.

Physicochemical properties of arsenic-bearing lime-ferrate sludge and its leaching behaviors

Physicochemical properties and leaching behaviors of two typical arsenic-bearing lime?ferrate sludges(ABLFS),waste acid residue(WAR)and calcium arsenate residue(CAR),are comprehensively described.The chemical composition,morphological features,phase composition and arsenic occurrence state of WAR and CAR are analyzed by ICP?AES,SEM?EDS,XRD,XPS and chemical phase analysis.The toxicity leaching test and three-stage BCR sequential extraction procedure are utilized to investigate arsenic leaching behaviors.The results show that the contents of arsenic in WAR and CAR are2.5%and21.2%and mainly present in the phases of arsenate and arsenic oxides dispersed uniformly or agglomerated in amorphous particles.The leaching concentrations of arsenic excess119and1063times of TCLP standard regulatory level with leaching rates of47.66%and50.15%for WAR and CAR,respectively.About90%of extracted arsenic is in the form of acid soluble and reducible,which is the reason of high arsenic leaching toxicity and environmental activity of ABLFS.This research provides comprehensive information on harmless disposal of ABLFS from industrial wastewater treatment of lime?ferrate process.

Elastoplastic modeling of mechanical behavior of weak sandstone at different time scales

A unified constitutive model is proposed to describe the mechanical behavior of weak sandstone at different time scales.The instantaneous behavior of this material is characterized by the Drucker-Prager elastoplastic model,while the time-dependent deformation is described in terms of the microstructure evolution.This evolution is numerically simulated by progressive degradation of the elastic modulus and failure strength of the material.The proposed model is used to simulate the instantaneous triaxial compression and the multi-loading creep tests.Generally,good concordance is obtained between numerical simulations and experimental data.The proposed model is capable of describing the main features of these rocks,particularly irreversible deformations,pressure dependency,volumetric transition between compaction and dilatancy,and creep behavior.