采用分段行-列核2DPCA的高光谱图像降维

二维主成分方法计算时间少,降维效果好,被成功应用到高光谱图像降维中。基于二维主成分方法,为挖掘高光谱图像的非线性信息,实现了分段行-列核2DPCA方法的降维,并对比分析了行-列2DPCA方法、分段行-列2DPCA方法和行-列核2DPCA方法的降维效果。利用相关性将高光谱图像划分为5个子空间,通过转换数据结构来实现行和列的核2DPCA变换,最后将行和列结果进行融合得到降维结果。降维结果表明,在较高信息保持率情况下,分段行-列核2DPCA方法具有最高的图像清晰度和边缘强度。不同地物像元像素折线图表明,分段行-列核2DPCA方法能更好地区分不同地物,可以很好地应用于地物分类和目标识别。

分段潜行移植胸锁乳突肌双头单蒂肌瓣修复半侧颜面萎缩临床疗效分析

目的探讨分段潜行移植胸锁乳突肌胸骨头及锁骨头双头单蒂肌瓣对半侧颜面萎缩的修复效果。方法我科采用分段潜行移植胸锁乳突肌双头带蒂肌瓣修复5例半侧颜面萎缩患者,观察术后伤口愈合及颈部功能情况,术后随访半年以上。结果 5例移植肌瓣存活良好,颜面部萎缩畸形均得到良好矫正,颈部功能活动无异常。结论通过分段潜行胸锁乳突肌胸骨头及锁骨头双头带蒂肌瓣移位术,既达到了半侧颜面萎缩凹陷畸形的有效整复,又不会影响颈部外观及功能,明显改善患者生存质量,符合功能外科修复的发展要求,是一种临床应用效果比较理想的方法,值得推广。

分段潜行外剥内扎加选择性断桥缝合术治疗环状混合痔的临床疗效

目的:探讨采用分段潜行外剥内扎和选择性断桥缝合术对环状混合痔的治疗效果。方法:选取近1年收治的环状混合痔患者100例,随机分为观察组和对照组。观察组(50例)采用分段潜行外剥内扎加选择性断桥缝合术治疗,对照组(50例)采用外剥内扎治疗,对比两组患者的疗效。结果:观察组患者与对照组患者总有效率比较差异无统计学意义(χ~2=2.83,P>0.05),观察组患者在手术后切口疼痛程度、并发症发生率、住院时间以及伤口愈合时间都低于对照组(P<0.05)。结论:治疗环状混合痔采用分段潜行外剥内扎加选择性断桥缝合术,能达到同样治疗效果前提下,可缩短住院时间、促进恢复、减少术后疼痛。

一种简单有效的手写体数字特征提取算法

综合统计特征提取法与结构特征提取法的优点,设计了一种新的基于圈、左右轮廓特征与行分段特征来获取数字字符特征向量的方法。该办法用较少的特征向量就能够保留数字字符拓扑结构中的关键信息,适应性很强。仿真实验中,首先根据字符容易获取的结构特征(圈)对字符进行大体分类,然后利用基于级联结构的AD AdaBoost神经网络根据余下的特征值进行逐层淘汰识别。结果表明,该办法在识别速度与识别正确率方面都有所改进。

Tensile stress-strain behavior of metallic alloys

Tensile stress-strain curves of five metallic alloys,i.e.,SKH51,STS316L,Ti-6Al-4V,Al6061and Inconel600were analyzed to investigate the working hardening behavior.The constitutive parameters of three constitutive equations,i.e.,the Hollomon,Swift and Voce equations,were compared by using different methods.A new working hardening parameter was proposed to characterize the working hardening behavior in different deformation stages.It is found that Voce equation is suitable to describe stress-strain curves in large strain region.Meanwhile,the predicting accuracy of ultimate tensile strength by Voce equation is the best.The working hardening behavior of SKH51is different from the other four metallic alloys.

Assessment of grid inherent vulnerability considering open circuit fault under potential energy framework

A potential energy framework for assessment of grid vulnerability was presented.In the framework,the branch potential energy function model was constructed.Two indexes,current vulnerability and forecasting vulnerability,were calculated.The current vulnerability was used to identify the current vulnerable area through calculating the distance between the current transmitted power and initial transmitted power;and the forecast vulnerability under variation of power injection was used to predict the vulnerable area of next step and verify the current vulnerable area.Numerical simulation was performed under variant operating conditions with IEEE-30 bus system,which shows that almost area of 90% overlaps between current vulnerable area and forecasting vulnerable area,the overlapped area is termed as inherent vulnerable area of grid.When considering N-1 contingency,the assessment results of this method proposed agree with those of optimal power flow.When considering N-2 contingency,optimal power flow fails to obtain correct results,while the method based on energy framework gives reliable results.

Preparation of Phase Change Microcapsule and Its Plication in Textiles

Phase change microcapsules(PCMs)are prepared with n-hexadecane and n-octadecane as core material,and melamine-formaldehyde resin is used as shell material by in-situ polymerization.Differential scanning calorimetry(DSC)was used to analyze the phase change properties.Thermal conductivity and maximum heat flux of cotton fabric finished with PCMs before and after being washed were also measured.It has been found that melting and crystal enthalpy of the PCMs decrease with decreasing the core/shell ratio,while qmax of fabric treated with PCMs decreases and the thermal conductivity increases.Study shows that fabric finished by the PCMs has good temperature conditioning function.

A Phase Space Reconstruction Based Approach to Throughput Prediction in Semiconductor Wafer Fabrication System

In order to manage and control semiconductor wafer fabrication system (SWFS) more effectively,the daily throughput prediction data of wafer fab are often used in the planning and scheduling of SWFS.In this paper,an artificial neural network (ANN) prediction method based on phase space reconstruction (PSR) and ant colony optimization (ACO) is presented,in which the phase space reconstruction theory is used to reconstruct the daily throughput time series,the ANN is used to construct the daily throughput prediction model,and the ACO is used to train the connection weight and bias values of the neural network prediction model.Testing with factory operation data and comparing with the traditional method show that the proposed methodology is effective.

Solid–liquid equilibrium of dimethyl terephthalate(DMT), dimethyl isophthalate(DMI) and dimethyl phthalate(DMP) in melt crystallization process

The binary solid-liquid equilibrium of Dimethyl Terephthalate （DMT）, Dimethyl lsophthalate （DMI） and Dimeth- yl Phthalate （DMP） was investigated by experiment and differential scanning calorimetry （DSC）. The result demonstrated DMT/DMI and DMT/DMP systems are eutectic while DMI/DMP is a solid-solution system. The eutectic temperature of DMT/DMI system is 336.7 K and that of DMT/DMP is 271.1 K. Furthermore, a classical solid-liquid phase equilibrium model was used to fit the experimental data of the eutectic systems of DMT/DMI and DMT/ DMP and the theoretical model could describe the eutectic solid-liquid phase diagrams properly.

Suburban travel mode choice considering transit accessibility of stops in public transport

To analyze the influence of the transit accessibility of stops on the travel mode choices of suburban residents,the number of the lines passing by the stops within an accessible range of the resident origin and destination(OD)points and the average waiting time are used as the indexes of the transit accessibility of stops.Due to the correlation between travel time and accessible range,the transit accessibility of stops is contrasted as piecewise variables constrained by travel time.Taking the Jimei District of Xiamen,China,as an example,a binary logistic regression model of the suburban travel mode choice is constructed.The results show that it is necessary to construct transit accessibility of stops as piecewise variables.With a higher transit accessibility of stops,more residents will choose public transport.The choice of the travel mode is correlated with family attributes and personal characteristics.Morning and evening peak hours and travel distance have little effect on the choice of travel mode.Compared with the travel in urban areas,residents often chose public transport for travel within the suburbs.This research provides a basis for encouraging public transportation priority policies and decision making for transport planners in the suburbs.

Comparative Analysis of Bridges with AASHTO and Florida I-Beam Girders

A comparative study of two pre-stressed girder bridges, one with AASHTO （American Association of State Highway and Transportation Officials） Type III girders and the other with new FIB （Florida l-beam） girders, is presented. FIB girders are expected to provide increased lateral stiffness, higher load carrying capacity, cost-efficiency and better reliability. In this paper, the first bridge that is analyzed is a 3-span bridge designed with six AASHTO Type III girders, and the second bridge has four FIB girders with the same span length, width and girder depth. The bridges are analyzed for Florida state legal loads SU4 and C5. Both bridges are analyzed using a sophisticated finite element method. The deflections, moment envelopes, section capacity and live load rating of the two bridges are obtained and compared. FIB girders have higher vertical stiffness, higher section capacity providing higher load rating than the AASHTO girders.

Thermodynamic Geometry of Charged AdS Black Hole Surrounded by Quintessence

In this paper, we study the thermodynamic geometry for the charged Ad S black hole surrounded by quintessence. Three different kinds of the geometries are constructed, and the corresponding curvatures are obtained. It is found that there are different divergence behaviors of these curvatures, which is general thought to closely link to the phase transition of the black hole.

Rayleigh wave phase velocities of South China block and its adjacent areas

Using records of continuous seismic waveforms from 609 broadband seismic stations in the South China Block and its adjacent areas in 2010–2012, empirical Green's functions of surface waves were obtained from cross-correlation functions of ambient noise data between these stations. High quality phase velocity dispersion curves of Rayleigh waves were obtained using time-frequency analysis. These interstation dispersion curves were then inverted to build Rayleigh wave phase velocity maps at periods of 6–50 s. The results of phase velocity maps indicate that phase velocities at 6–10 s periods are correlated with the geological features in the upper crust. Major basins and small-scale grabens and basins display slow velocity anomalies; while most of the orogenic belts and the fold belts display high velocity anomalies. With the gravity gradient zone along Taihang Mountain to Wuling Mountain as the boundary for the phase velocity maps at period of 20–30 s, the western area mainly displays low velocity anomalies, while the eastern side shows high velocity anomalies. Phase velocities in the eastern South China Block south to the Qinling-Dabie orogenic belt is higher than that in the eastern North China Block to the north, which is possibly due to the differences of tectonic mechanisms between the North China Craton and the South China Block. The phase velocities at periods of40–50 s are possibly related to the lateral variations of the velocity structure in the lower crust and upper mantle: The low-velocity anomalies in the eastern part of the Tibetan Plateau are caused by the thick crust; while the Sichuan Basin and the southern part of the Ordos Basin display distinct high-velocity anomalies, reflecting the stable features of the lithosphere in these blocks. The lateral variation pattern of phase velocities in the southern part of the South China Block is not consistent with the surface trace of the block boundary in the eastern Yunnan Province and its vicinities. The phase velocities in the Sichuan Basin are overall slow at short periods and gradually increase with period from the central part to the edge of the basin, indicating the features of shallower basement in the center and overall stable lithospheric mantle of the basin. The middle and upper crust of the southern Ordos Basin in the North China Block is heterogeneous, while in lower crust and the uppermost mantle the phase velocities mainly exhibit high anomalies. High-velocity anomalies are widespread at the middle of the Qinling-Dabie orogenic belt, as well as the areas in southeastern Guangxi with Caledonian granite explosion, but its detailed mechanism is still unclear.

Dielectric properties of Pb (Zn_(1/3) Nb_(2/3)) O_3-PbZrO_3-PbTiO_3 solid solution near morphotropic phase boundary

The dielectric properties of Pb(Zn1/3Nb2/3)O3-PbZrO3-PbTiO3 (PZN-PZ-PT) system near the rhombohedral/tetragonal morphotropic phase boundary (MPB) are carefully studied in this paper.It is found that,for all samples,the curves around the temperatures of dielectric permittivity peak show the characteristics of diffuse phase transition.The change in PbZrO3/PbTiO3 ratio has much influence on the dielectric properties of the samples.The extent of diffuse phase transition increases with the increasing Zr/Ti ratio.The samples in rhombohedral region have typical diffuse phase transition in the temperature range measured.However,for the samples with tetragonal symmetry,a spontaneous normal ferroelectric-relaxor phase transition exists at temperature lower than that of permittivity peak.This normal ferroelectric-relaxor phase transition is confirmed by the experiment of thermally driven current.The analysis of TEM reveals that the samples in tetragonal region show a 90° macrodomain structure,while the samples in rhombohedral region have the configuration of microdomain structure.

Developed ‘laminar’ bubbly flow with non-uniform bubble sizes

Bubbles with different sizes have different dynamic and kinetic behavior in a two-phase bubbly flow. A common two-fluid model based on the uniform bubble size assumption is not suitable for a bubbly flow with non-uniform bubble sizes. To deal with non-uniform bubbly flows, a multi-fluid model is established, with which bubbles are divided into several groups according to their sizes and a set of basic equations is derived for each group of bubbles with almost the same size. Through analyzing the bubble-bubble and bubble-pipe wall interactions, two new constitutive laws for the wall-force and pressure difference between the liquid phase and interface are developed to close the averaged basic equations. The respective phase distributions for each group of bubbles measured by a specially designed three-dimensional photographic method are used to check the model. Comparison between model-predicted values and experimental data shows that the model can describe laminar bubbly flow with non-uniform bubble sizes.

Study of Cycle Output Improvement by Work-Fluid Including Phase Change Material

This paper deals with the output improvement of heating and cooling cycle by using the work-fluid including phase change material.The experimental study is carried out by heat exchange between work-fluid and heat transfer surface.The work-fluid is flown to a high temperature or a low temperature heat transfer surface from the narrow path.In order to increase the amount of the heat transmission,a trace of Diethylether(boiling point 34.8 ℃),as a phase change material(PCM),is added to the work-fluid.The parameters of the experiment are additive amount of PCM,the rotational speed of the displacer piston and the temperature of heat transfer surface.It is clarified that the increasing of engine cycle output is brought by the PCM addition.The effect of PCM addition is evaluated by output ratio which is defined from the experimental cycle output data.The requirements for acquiring the increasing effect of output by adding PCM are clarified.

Multiplicity factor and diffraction geometry factor for single crystal X-ray diffraction analysis and measurement of phase content in cubic GaN/GaAs(001) epilayers

On the basis of integrated intensity of rocking curves, the multiplicity factor and the diffraction geometry factor for single crystal X-ray diffraction (XRD) analysis were proposed and a general formula for calculating the content of mixed phases was obtained. With a multifunction four-circle X-ray double-crystal diffractometer, pole figures of cubic (002), 1111 and hexagonal 1010 and reciprocal space mapping were measured to investigate the distributive character of mixed phases and to obtain their multiplicity factors and diffraction geometry factors. The contents of cubic twins and hexagonal inclusions were calculated by the integrated intensities of rocking curves of cubic (002), cubic twin 111, hexagonal 1010 and 1011.

Nano-tribology through molecular dynamics simulations

The solidification and interfacial slip in nanometer-scale lubricating films as well as the contact and adhesion of metal crystals have been studied via molecular dynamics simulations. Results show that the critical pressure for the solid-liquid transition declines as the film thickness decreases, in-dicating that the lubricant in the thin films may exist in a solid-like state. It is also found that the interfa-cial slip may occur in thin films at relatively low shear rate, and there is a good correlation between the slip phenomenon and the lubricant solidification. The simulations reveal that a micro-scale adhesion may take place due to the atomic jump during the process of approaching or separating of two smooth crystal surfaces, which provides important information for understanding the origin of interfacial friction.