衡力~改善眉间纹的安全性和有效性

目的:评价衡力改善眉间纹的安全性和有效性。方法:采用不同剂量、多中心、随机、双盲、安慰剂平行对照的优效性试验设计,将安慰剂以及100单位/瓶和50单位/瓶衡力R用2.5ml氯化钠注射液复溶,在左右皱眉肌各取2位点,降眉间肌取1位点,每1位点肌肉内注射0.1ml。结果:对488例受试者为期120天的观察,有效性结果显示:20单位组优于10单位组,10单位组优于安慰剂组;安全性结果显示:发生不良事件81例138例次,不良反应为69例81例次,没有严重不良事件。结论:衡力R10单位、20单位,在改善眉间纹方面,与安慰剂相比,疗效确切,高剂量组(20单位)要优于低剂量组(10单位),但是,两剂量组之间不良事件和不良反应发生率在统计学上无差异。

孔隙水压力条件下含缺陷岩样破坏过程及声发射模拟

在平面应变压缩条件下,采用FLAC模拟了围压存在时孔隙压力对具有初始随机材料缺陷的岩石的破坏过程、前兆及声发射的影响。密实的岩石服从莫尔库仑剪破坏与拉破坏复合的破坏准则,破坏之后呈现应变软化-理想塑性行为。缺陷在破坏之后经历理想塑性行为。在孔隙压力存在时,缺陷在施加轴向加载速度之前就发生了破坏。当施加轴向速度后,声发射累积数先一度保持恒定,然后由于缺陷的长大声发射累积数发生了少量的突增。经历了一段短暂的平静之后,由于短剪切带聚合成长剪切带声发射累积数发生了大量的突增,穿越应力峰值。之后,仅有零星声发射活动,试样处于平静的残余变形阶段。随着孔隙压力的增加,应力峰值达到时的声发射累积数提高,应力峰值附近的声发射活动变得强烈,残余变形阶段达到时的声发射累积数提高。出现在软化阶段的最大失衡力的峰值随着孔隙压力的增加而降低。

催化裂化装置烟气轮机入口膨胀节变形分析

文章介绍了波形膨胀节应力分布的一般特点。针对三旋改造后烟气轮机入口膨胀节变形及过热的问题进行了简要分析,指出三旋改造过程中膨胀节未预紧及恒力弹簧未复位是导致膨胀节产生转角变大及局部超温的主要原因,并按 EJMA(美国膨胀节制造商协会)标准进行了应力评定。

Theoretical simulation and experimental study of hydrolysis separation of SbCl_3 in complexation-precipitation system

The theoretical simulation and verified experiments on metal separation in a Sb^3＋-OH^--Cl^-complexation-precipitation system involving hydrolysis-precipitation reactions of SbOCl, Sb4O5Cl2and Sb2O3were carried out. The equilibrium concentration of [Sb^3＋]Twas obtained by calculation and verified by experiments. The precipitates SbOCl,Sb4O5Cl2and Sb2O3were analyzed through the equilibrium concentration of Sb^3＋in the solution and the ΔrGΘmof transformation reactions of these materials. It is found that the concentration of [Sb^3＋]Tin verified experiments was larger than the theoretical value, where the theoretical minimum concentration of [Sb^3＋]Twas 10^-10.92mol/L at pH value of 4.6 and the minimum concentration obtained from the verified experiment was about 10^-3.8mol/L at pH value of 5.1. Different precipitates can be obtained atcertain pH. The SbOCl cannot be obtained both in theoretic calculations and in verified experiments, while the Sb8O11Cl2-H2O was generated in the experiment.

COMPENSATION CONTROL OF REAL-TIME UNBALANCE FORCE FOR ACTIVE MAGNETIC BEARING SYSTEM

Aiming at the stability and others properties of active magnetic bearing （AMB） system influenced by the periodic unbalance stimulation synchronous with rotor rotational speed, a new real-time adaptive feed-forward unbalance force compensation scheme is proposed based on variable step-size least mean square（LMS） algorithm as the feed-forward compensation controller. The controller can provide some suitable sinusoidal signals to com- pensate the feedback unbalance response signals synchronous with the rotary frequency, then reduce the fluctua- tion of the control currents and weaken the active control of AMB system. The variable step-size proportional to the rotational frequency is deduced by analyzing the principle of normal LMS algorithm and its deficiency in the application of real-time filtering of AMB system. Experimental results show that the new method can implement real-time unbalance force compensation in a wide frequency band, reduce the effect of unbalance stimulant force on the housing of AMB system, and provide convenience to improve rotational speed.

Dynamic behavior of rock during its post failure stage in SHPB tests

In order to investigate the micro-process and inner mechanism of rock failure under impact loading, the laboratory tests were carried out on an improved split Hopkinson pressure bar （SHPB） system with synchronized measurement devices including a high-speed camera and a dynamic strain meter. The experimental results show that the specimens were in the state of good stress equilibrium during the post failure stage even when visible cracks were forming in the specimens. Rock specimens broke into strips but still could bear the external stress and keep force balance. Meanwhile, numerical tests with particle flow code （PFC） revealed that the failure process of rocks can be described by the evolution of micro-fractures. Shear cracks emerged firstly and stopped developing when the external stress was not high enough. Tensile cracks, however, emerged when the rock specimen reached its peak strength and played an important role in controlling the ultimate failure during the post failure stage.

FCC波形膨胀节稳定性分析

介绍了波形膨胀节应力分布的一般特点，针对三旋改造后烟机入口膨胀节变形及过热问题进行了简要分析．指出三旋改造过程中膨胀节未预变形及恒力弹簧未复位是导致膨胀节产生转角变大及局部超温的主要原因，并按EJMA（美国膨胀节制造商协会）标准进行了应力评定。

System-Level Modeling and Simulation of Force-Balance MEMS Accelerometers

This paper presents two approaches for system-level simulation of force-balance accelerometers. The derivation of the system-level model is elaborated and simulation results are obtained from the implementation of those strategies on the fabricated silicon force-balance MEMS accelerometer. The mathematical model presented is implemented in VHDL- AMS and SIMULINK TM,respectively. The simulation results from the two approaches are compared and show a slight difference. Using VHDL-AMS is flexible,reusable,and more accurate. But there is not a mature solver developed for the language and this approach takes more time, while the simulation model can be easily built and quickly evaluated using SIMULINK.

Effect of Silicon-on-Insulator Substrate on Residual Strain in 3C-SiC Films

One group of SiC films are grown on silicon-on-insulator （SOI） substrates with a series of silicon-overlayer thickness. Raman scattering spectroscopy measurement clearly indicates that a systematic trend of residual stress reduction as the silicon over-layer thickness decreases for the SOI substrates. Strain relaxation in the SiC epilayer is explained by force balance approach and near coincidence lattice model.

Kinetics Study on O2 Adsorption and OHad Desorption at Pt（111）, Its Implication to Oxygen Reduction Reaction Kinetics

Kinetics of dissociative O2 adsorption, OHad desorption, and oxygen reduction reaction （ORR） at Pt（111） electrode in 0.1 mol/L HClO4 has been investigated. Reversible OHad adsorption/desorption occurs at potentials from 0.6 V to 1.0 V （vs. RHE） with the exchange current density of ca. 50 mA/cm^2 at 0.8 V, the fast kinetics of OHad desorption indicates that it should not be the rate determining step for ORR. In the kineticor kinetic-mass transport mix controlled potential region, ORR current at constant potential displays slight decrease with reaction time. ORR current in the positive-going potential scan is slightly larger than that in the subsequent negative-going scan with electrode rotation speed （〉800 r/min） and slow potential scan rate （〈100 mV/s）. The open circuit potential of Pt/0.1 mol/L HClO4 interface increases promptly from 0.9 V to 1.0 V after switch from O2 free- to O2-saturated solution. The increase of open circuit potential as well as ORR current decays under potential control due to the accumulation of OHad from dissociative adsorption of O2. It indicates that at Pt（111） the net rate for O2 decomposition to OHad is slightly faster than that for OHad removal, one cannot simply use the assumption of rate determining step to discuss ORR kinetics. Instead, the ORR kinetics is determined by both the kinetics for O2 decomposition to OHad as well as the thermo-equilibrium of OHad＋H^＋＋e→←H2O.

Feasibility of flue-gas desulfurization by manganese oxides

For the purpose of effective and economic desulfurization of flue-gas, the predominance area diagram of the Mn-S-O system at different temperatures was constructed based on the thermodynamic data obtained from the literatures. It is seen from this figure that flue-gas desulfurization by manganese oxides is feasible from the thermodynamic point of view. Additionally, the most appropriate temperature range for flue-gas desulfurization is between 600 and 800 K, and the reaction is strongly exothermic to maintain the heat balance. The natural manganese ores encompass large tunnels that exhibit large surface areas and highly chemical activity, which can provide a high enough SO2 removing efficiency. From the superposition of the diagrams of Mn-S-O and Fe-S-O systems, it is found that there is a coexistent stability region of MnSO4 and Fe2O3, which provides the possibility of desulfurization by selective sulfation without ferric sulfate forming. A multi-stage desulfurization system has been discussed briefly.

NUMERICAL SIMULATION OF THERMAL NON-EQUILIBRIUM RADIATION ON UNSTRUCTURED GRIDS

A numerical method is developed based on an unstructured mesh to compute an ionized hypersonic flowfield with radiation in the thermo-chemical nonequilibrium. The flowfield is described by multi-species NavierStocks equations. The chemical model includes 11 species （O2, N2, O, N, NO, NO^＋ , N^＋ , O^＋, N2^＋ , O2^＋, e^- ） and 20 reactions. For simulating the thermal non-equilibrium effect, the two-temperature model is considered. The finite volume method （FVM） used for the spatial and directional discretization of radiative transfer equation（RTE） is described for unstructured grids. The numerical code can handle different kinds of species and radiative bands in a gas thermodynamicly described by two temperatures. In particular, the Delta, Epsilon, Beta prime, and Gamma prime bands of NO are choosen and the distribution of the radiation intensity is obtained.

New atom movement mechanism for tracking path on disordering AuCuI(A_8^(Au)A_4^(Cu)) compound

Taking experimental path on disordering AuCuI（AAuCu8A4）composed of A Au8 and ACu4 stem alloy genes as an example, three discoveries and a method were presented. The ability of Au Cu I（AAu Cu8 A4）to keep structure stabilization against changing temperature is attributed to the fact that the AAu8 and ACu4 potential well depths greatly surpass their vibration energies, which leads to the subequilibrium of experimental path. A new atom movement mechanism of AuCuI（AAuACu84）to change structure for suiting variation in temperature is the resonance activating-synchro alternating of alloy genes, which leads to heterogeneous and successive subequilibrium transitions. There exists jumping order degree, which leads to the existence of jumping Tj-temperature and an unexpected so-called ＂retro-effect＂ about jumping temperature retrograde shift to lower temperatures upon the increasing heating rate. A set of subequilibrium holographic network path charts were obtained by the experimental mixed enthalpy path method.

Study of Slope Reinforcement Force Based on FLAC

A slope will slide if the unbalanced force does not tend to zero when the stability of the slope is analyzed with the help of FLAC. Thus the ultimate reason of slope sliding is the unbalanced force determined by FLAC. The slope will remain stable if the unbalanced force is counterbalanced by a reinforcement force which is produced by a suitable reinforcement method. In this paper, the stability of the slope was analyzed by using FLAC, and the unbalanced force of the slope was obtained through the FISH function in FLAC. According to the equilibrium conditions, the relationship between the reinforcement force and unbalanced force was derived and accordingly the reinforcement force was determined. The reinforcement design was adopted by using pre-stressed anchor bars on the basis of the reinforcement force. An example is used to show that the effect of slope reinforcement based on the reinforcement force is safe and economical. The method doesn＇t need to suppose a sliding surface to obtain the reinforcement force, and it is also clear in physical meaning. So this method realized the organic unification of the stability analysis and the slope reinforcement.

First-principles thermodynamics of metal-oxide surfaces andinterfaces:A case study review

An important step for achieving the knowledge-based design freedom on nano-and interfacial materials is attained by elucidating the related surface and interface thermodynamics from the first principles so as to allow engineering the microstructures for desired properties through smartly designing fabrication processing parameters.This is demonstrated for SnO2 nano-particle surfaces and also a technologically important Ag-SnO2 interface fabricated by in-situ internal oxidation.Based on defect thermodynamics,we first modeled and calculated the equilibrium surface and interface structures,and as well corresponding properties,as a function of the ambient temperature and oxygen partial pressure.A series of first principles energetics calculations were then performed to construct the equilibrium surface and interface phase diagrams,to describe the environment dependence of the microstructures and properties of the surfaces and interfaces during fabrication and service conditions.The use and potential application of these phase diagrams as a process design tool were suggested and discussed.

Torsional vibration analysis of lathe spindle system with unbalanced workpiece

For the purpose of analyzing the torsional vibration caused by the gravitational unbalance torque arisen in a spindle system when it is machining heavy work piece,a 10-DOF lumped parameter model was made for the machine tool spindle system with geared transmission.By using the elementary method and Runge-Kutta method in Matlab,the eigenvalue problem was solved and the pure torsional vibration responses were obtained and examined.The results show that the spindle system cannot operate in the desired constant rotating speed as far as the gravitational unbalance torque is engaged,so it may cause bad effect on machining accuracy.And the torsional vibration increases infinitely near the resonant frequencies,so the spindle system cannot operate normally during these spindle speed ranges.

Non-equilibrium Molecular Dynamics Simulation on Pure Gas Permeability Through Carbon Membranes

The permeation of various pure gas （H2, He, Ne, CH4 and At） through carbon membranes is investigated using a dual control volume grand canonical molecular dynamics method. A two-dimensional slit pore is employed instead of the one-dimensional pore. Compared with the experiments, simulation results show that the improvement of pore model is very necessary. The effects of membrane thickness, pore width and temperature on gas permeance and ideal separation factor are also discussed. Results show that gas permeates through membrane according to Knudsen diffusion in large pore, while Knudsen diffusion is accompanied by molecular sieving in small pore. Moreover, methane is easily adsorbed on the membrane surface due to strong attractive interactions of membrane and shows higher permeance than that of Knudsen flow. In addition, it is noted that when membrane thickness is thin enough the permeance of gas does not decrease with the increase of membrane thickness due to the strong adsorption until membrane resistance becomes dominant.

Gibberellin homeostasis and plant height control by EUI and a role for gibberellin in root gravity responses in rice

The rice Eui （ELONGATED UPPERMOST INTERNODE） gene encodes a cytochrome P450 monooxygenase that deactivates bioactive gibberellins （GAs）. In this study, we investigated controlled expression of the Eui gene and its role in plant development. We found that Eui was differentially induced by exogenous GAs and that the Eui promoter had the highest activity in the vascular bundles. The eui mutant was defective in starch granule development in root caps and Eui overexpression enhanced starch granule generation and gravity responses, revealing a role for GA in root starch granule development and gravity responses. Experiments using embryoless half-seeds revealed that RAmylA and GAmyb were highly upregulated in eui aleurone ceils in the absence of exogenous GA. In addition, the GA biosynthesis genes GA3oxl and GA20ox2 were downregulated and GA2oxl was upregulated in eui seedlings. These results indicate that EUI is involved in GA homeostasis, not only in the internodes at the heading stage, but also in the seedling stage, roots and seeds. Disturbing GA homeostasis affected the expression of the GA signaling genes GID1 （GIBBERELLIN INSENSITIVE DWARF 1）, GID2 and SLR1. Transgenic RNA interference of the Eui gene effectively increased plant height and improved heading performance. By contrast, the ectopic expression of Eui under the promoters of the rice GA biosynthesis genes GA3ox2 and GA2Oox2 significantly reduced plant height. These results demonstrate that a slight increase in Eui expression could dramatically change rice morphology, indicating the practical application of the Eui gene in rice molecular breeding for a high yield potential.

Influence of Pore Size,Salinity and Gas Composition upon the Hydrate Formation Conditions

An experimental device was set up to study the hydrate formation conditions.Effects of pore size,salinity,and gas composition on the formation and dissociation of hydrates were investigated.The result indicates that the induction time for the formation of hydrates in porous media is shorter than that in pure water.The decrease in pore size,by decreasing the size of glass beads,increases the equilibrium pressure when the salinity and temperature are kept constant.In addition,higher salinity causes higher equilibrium pressure when the pore size and temperature are kept constant.It is found that the effects of pore size and salinity on the hydrate equilibrium are quite different.At lower methane concentration,the hydrate equilibrium is achieved at lower pressure and higher temperature.

Balance Mechanism Design of Single Cylinder Engine Based on Continuous Mass Distribution of Connecting Rod

For a single cylinder engine, the total unbalanced inertial forces occur in the engine block, which results in engine’s vibration and deteriorated noise. In order to eliminate the unbalanced forces, counterweight and primary balance shaft should be attached to the cylinder block so that engine durability and ride comfortability may be further improved. Traditionally one third of connecting rod assembly’s mass is treated as reciprocating mass, and two thirds as rotating mass when designing balance mechanism. In this paper, a new method based on the multibody dynamics simulation is introduced to separate the reciprocating mass and rotating mass of connecting rod assembly. The model consists of crankshaft, connecting rod, piston and the simulation is performed subsequently. According to the simulation results of the main bearing loads, the reciprocating mass and rotating mass are separated. Finally a new balance mechanism is designed and simulation results show that it completely balances inertial forces to improve the engine’s noise vibration and harshness performance.