The cascaded chirp fiber Bragg gratings(CFBGs) with ITU-T standard wavelengths and wavelength grid are applied to compensate the dispersion of 8×10 Gb/s WDM system.The ASE of the EDFA could be reduced,the OSNR of...The cascaded chirp fiber Bragg gratings(CFBGs) with ITU-T standard wavelengths and wavelength grid are applied to compensate the dispersion of 8×10 Gb/s WDM system.The ASE of the EDFA could be reduced,the OSNR of the transmitted signal can be increased and the fluctuation of the EDFA gain can be restrained in a certain scope by the CFBG employed in the system.Experiment of error-free 8×10 Gb/s 2 015 km transmission without FEC and electric regeneration is demonstrated in this paper.In this system,only EDFA is used as amplifier,and no other form of dispersion compensator is adopted except CFBG.The experimental result showed that after 2015 km transmission,the consistency of the dispersion compensating for each channel is perfect.展开更多
By introducing a two-stage polarization mode dispersion (PMD) compensator after a optical fiber link with a large PMD,over 270 ps first-order and 2 000 ps^2 high-order PMD was compensated.The results show that the two...By introducing a two-stage polarization mode dispersion (PMD) compensator after a optical fiber link with a large PMD,over 270 ps first-order and 2 000 ps^2 high-order PMD was compensated.The results show that the two-stage compensator can be used to PMD compensation in the 20 Gb/s optical time division multiplexing system with 60 km high PMD fiber.After compensating,the 270 ps DGD is changed into max.7 ps.Moreover,the tunable FBG has a function of dispersion compensation.展开更多
A novel double fiber Bragg grating（FBG） strain sensor configuration is presented. Temperature compensation method is based on double FBG moored on a rhombus frame. Through the theoretical analysis, the relation betw...A novel double fiber Bragg grating（FBG） strain sensor configuration is presented. Temperature compensation method is based on double FBG moored on a rhombus frame. Through the theoretical analysis, the relation between relative shift of Bragg wavelength and the strain applied on the sensor is obtained, and the analytical expression of strain sensitivity coefficient is also given. The experiment results show that： in the strain range of 0-0. 8 mm, the relation between the relative shift of Bragg wavelength and applied strain is linear, and the dispersion of double FBG wavelength at the range of -25℃- 60℃ is 0-0. 002 nm. The strain sensitivity of the displacement sensor configuration is 0. 171 nm/με, and is nearly twice than that of single FBG sensor.展开更多
A 10 Gbit/s recirculating system is configured with Chirped Fiber Bragg Grating (CFBG) for the dispersion compensation. For the first time, the transmission distance in the loop reaches 1000km with bit error rate of 1...A 10 Gbit/s recirculating system is configured with Chirped Fiber Bragg Grating (CFBG) for the dispersion compensation. For the first time, the transmission distance in the loop reaches 1000km with bit error rate of 10-9. The effect of the group delay ripple of the fiber grating is also investigated in the recirculating systems, and it is shown that the transmission distance is limited to 4 cycles (4× 167.1km ) in the loop with the power penalty fluctuation below 1.0dB. Thus the group delay ripple should be reduced to allow for the wavelength drift of ±5GHz.At the end of this letter, the principles are given for designing long haul recirculating systems with dispersion compensation CFBG.展开更多
文摘The cascaded chirp fiber Bragg gratings(CFBGs) with ITU-T standard wavelengths and wavelength grid are applied to compensate the dispersion of 8×10 Gb/s WDM system.The ASE of the EDFA could be reduced,the OSNR of the transmitted signal can be increased and the fluctuation of the EDFA gain can be restrained in a certain scope by the CFBG employed in the system.Experiment of error-free 8×10 Gb/s 2 015 km transmission without FEC and electric regeneration is demonstrated in this paper.In this system,only EDFA is used as amplifier,and no other form of dispersion compensator is adopted except CFBG.The experimental result showed that after 2015 km transmission,the consistency of the dispersion compensating for each channel is perfect.
文摘By introducing a two-stage polarization mode dispersion (PMD) compensator after a optical fiber link with a large PMD,over 270 ps first-order and 2 000 ps^2 high-order PMD was compensated.The results show that the two-stage compensator can be used to PMD compensation in the 20 Gb/s optical time division multiplexing system with 60 km high PMD fiber.After compensating,the 270 ps DGD is changed into max.7 ps.Moreover,the tunable FBG has a function of dispersion compensation.
文摘A novel double fiber Bragg grating（FBG） strain sensor configuration is presented. Temperature compensation method is based on double FBG moored on a rhombus frame. Through the theoretical analysis, the relation between relative shift of Bragg wavelength and the strain applied on the sensor is obtained, and the analytical expression of strain sensitivity coefficient is also given. The experiment results show that： in the strain range of 0-0. 8 mm, the relation between the relative shift of Bragg wavelength and applied strain is linear, and the dispersion of double FBG wavelength at the range of -25℃- 60℃ is 0-0. 002 nm. The strain sensitivity of the displacement sensor configuration is 0. 171 nm/με, and is nearly twice than that of single FBG sensor.
基金the National 863 High Technology Development Program of China (No.2001 AA122012)
文摘A 10 Gbit/s recirculating system is configured with Chirped Fiber Bragg Grating (CFBG) for the dispersion compensation. For the first time, the transmission distance in the loop reaches 1000km with bit error rate of 10-9. The effect of the group delay ripple of the fiber grating is also investigated in the recirculating systems, and it is shown that the transmission distance is limited to 4 cycles (4× 167.1km ) in the loop with the power penalty fluctuation below 1.0dB. Thus the group delay ripple should be reduced to allow for the wavelength drift of ±5GHz.At the end of this letter, the principles are given for designing long haul recirculating systems with dispersion compensation CFBG.
