升降轨PSInSAR时序分析获得的同一地区2组监测结果分别为升轨和降轨下的地表形变速率与累积变形量。针对研究区地面以下沉为主,水平方向变形极为微小的特点,将视线向(line of sight,LOS)变形转换为垂向的下沉值,以此进行升降轨模式下2...升降轨PSInSAR时序分析获得的同一地区2组监测结果分别为升轨和降轨下的地表形变速率与累积变形量。针对研究区地面以下沉为主,水平方向变形极为微小的特点,将视线向(line of sight,LOS)变形转换为垂向的下沉值,以此进行升降轨模式下2组观测值的比较与精度检验。在此基础上,将相干目标的2组观测序列数据融合以实现加密观测。研究结果表明:升降轨模式下沉降速率观测值的互检验精度优于2 mm;2组观测序列数据的融合结果进一步揭示了相干目标在时域上的非线性沉降特征。展开更多
A bandgap voltage reference is presented with a piecewise linear compensating circuit in order to reduce the temperature coefficient.The basic principle is to divide the whole operating temperature range into some su...A bandgap voltage reference is presented with a piecewise linear compensating circuit in order to reduce the temperature coefficient.The basic principle is to divide the whole operating temperature range into some sub ranges.At different temperature sub ranges the bandgap reference can be compensated by different linear functions.Since the temperature sub range is much narrower than the whole range,the compensation error can be reduced significantly.Theoretically,the precision can be improved unlimitedly if the sub ranges are narrow enough.In the given example,with only three temperature sub ranges,the temperature coefficient of a conventional bandgap reference drops from 1 5×10 -5 /℃ to 2×10 -6 /℃ over the -40℃ to 120℃ temperature range.展开更多
A new method,namely multiple point curvature compensation （MPCC）,is proposed for the design of a bandgap reference,and its design principles, theoretical derivation, and one feasible circuitry implementation are pre...A new method,namely multiple point curvature compensation （MPCC）,is proposed for the design of a bandgap reference,and its design principles, theoretical derivation, and one feasible circuitry implementation are presented. Being different from traditional techniques, this idea focuses on finding multiple temperatures in the whole range at which the first order derivatives of the output reference voltage equal zero. In this way, the curve of the output reference voltage is flattened and a better effect of curvature compensation is achieved. The circuitry is simulated in ST Microelectronics 0. 18μm CMOS technology, and the simulated result shows that the average temperature coefficient is only 1ppm/℃ in the range from - 40 to 125℃.展开更多
In polarization-encoded free-space quantum communications, a transmitter on a satellite and a receiver in a ground station each have a respective polarization zero direction, by which they encode and decode every pola...In polarization-encoded free-space quantum communications, a transmitter on a satellite and a receiver in a ground station each have a respective polarization zero direction, by which they encode and decode every polariza-tion quantum bit required for a quantum com-munication protocol. In order to complete the protocol, the ground-based receiver needs to track and compensate for the polarization zero direction of the satellite-based transmitter. Ex- pressions satisfied by amplitudes of the s-polarization component and the p-polarization component are derived based on a two-mirror model, and a condition satisfied by the reflec- tion coefficients of the two mirrors is given. A polarization tracking principle is analyzed for satellite-to-ground quanaun communications, and quantum key encoding and decoding prin- ciples based on polarization tracking are given. A half-wave-plate-based dynamic polariza- tion-basis compensation scheme is proposed in this paper, and this scheme is proved to be suitable for satellite-to-ground and intersatellite quantum communications.展开更多
Series compensation has proven to increase stability in transmission of electric power. On the other hand insertion of series capacitor results in severe subsynchronous torques. The subsynchronous torque leads to gene...Series compensation has proven to increase stability in transmission of electric power. On the other hand insertion of series capacitor results in severe subsynchronous torques. The subsynchronous torque leads to generator-turbine shaft damage. Mitigation of subsynchronous transient torques is achieved through resistor bank connected to generator terminals. The insertion of resistor bank is controlled by fuzzy logic controller. The proposed controller has been tested on IEEE First Benchmark Model and it proved to have good damping for the torsional torques.展开更多
文摘升降轨PSInSAR时序分析获得的同一地区2组监测结果分别为升轨和降轨下的地表形变速率与累积变形量。针对研究区地面以下沉为主,水平方向变形极为微小的特点,将视线向(line of sight,LOS)变形转换为垂向的下沉值,以此进行升降轨模式下2组观测值的比较与精度检验。在此基础上,将相干目标的2组观测序列数据融合以实现加密观测。研究结果表明:升降轨模式下沉降速率观测值的互检验精度优于2 mm;2组观测序列数据的融合结果进一步揭示了相干目标在时域上的非线性沉降特征。
文摘A bandgap voltage reference is presented with a piecewise linear compensating circuit in order to reduce the temperature coefficient.The basic principle is to divide the whole operating temperature range into some sub ranges.At different temperature sub ranges the bandgap reference can be compensated by different linear functions.Since the temperature sub range is much narrower than the whole range,the compensation error can be reduced significantly.Theoretically,the precision can be improved unlimitedly if the sub ranges are narrow enough.In the given example,with only three temperature sub ranges,the temperature coefficient of a conventional bandgap reference drops from 1 5×10 -5 /℃ to 2×10 -6 /℃ over the -40℃ to 120℃ temperature range.
文摘A new method,namely multiple point curvature compensation （MPCC）,is proposed for the design of a bandgap reference,and its design principles, theoretical derivation, and one feasible circuitry implementation are presented. Being different from traditional techniques, this idea focuses on finding multiple temperatures in the whole range at which the first order derivatives of the output reference voltage equal zero. In this way, the curve of the output reference voltage is flattened and a better effect of curvature compensation is achieved. The circuitry is simulated in ST Microelectronics 0. 18μm CMOS technology, and the simulated result shows that the average temperature coefficient is only 1ppm/℃ in the range from - 40 to 125℃.
基金supported by the Scientific Research Fund of Heilongjiang Provincial Education Department of China under Grant No.12511119
文摘In polarization-encoded free-space quantum communications, a transmitter on a satellite and a receiver in a ground station each have a respective polarization zero direction, by which they encode and decode every polariza-tion quantum bit required for a quantum com-munication protocol. In order to complete the protocol, the ground-based receiver needs to track and compensate for the polarization zero direction of the satellite-based transmitter. Ex- pressions satisfied by amplitudes of the s-polarization component and the p-polarization component are derived based on a two-mirror model, and a condition satisfied by the reflec- tion coefficients of the two mirrors is given. A polarization tracking principle is analyzed for satellite-to-ground quanaun communications, and quantum key encoding and decoding prin- ciples based on polarization tracking are given. A half-wave-plate-based dynamic polariza- tion-basis compensation scheme is proposed in this paper, and this scheme is proved to be suitable for satellite-to-ground and intersatellite quantum communications.
文摘Series compensation has proven to increase stability in transmission of electric power. On the other hand insertion of series capacitor results in severe subsynchronous torques. The subsynchronous torque leads to generator-turbine shaft damage. Mitigation of subsynchronous transient torques is achieved through resistor bank connected to generator terminals. The insertion of resistor bank is controlled by fuzzy logic controller. The proposed controller has been tested on IEEE First Benchmark Model and it proved to have good damping for the torsional torques.
