O436.3 97010099复合补偿法测量波片=Measurement of waveplate by combination compensation[刊,中]/薛庆文(济宁教育学院.山东,济宁(272117))∥量子电子学.—1996,13(2).—178介绍的复合补偿法是依据波片的复合理论,采用任意波片作为...O436.3 97010099复合补偿法测量波片=Measurement of waveplate by combination compensation[刊,中]/薛庆文(济宁教育学院.山东,济宁(272117))∥量子电子学.—1996,13(2).—178介绍的复合补偿法是依据波片的复合理论,采用任意波片作为补偿片。展开更多
Aiming at the higher bit-rate occupation of motion vector encoding and more time load of full-searching strategies, a multi-resolution motion estimation and compensation algorithm based on adjacent prediction of frame...Aiming at the higher bit-rate occupation of motion vector encoding and more time load of full-searching strategies, a multi-resolution motion estimation and compensation algorithm based on adjacent prediction of frame difference was proposed.Differential motion detection was employed to image sequences and proper threshold was adopted to identify the connected region.Then the motion region was extracted to carry out motion estimation and motion compensation on it.The experiment results show that the encoding efficiency of motion vector is promoted, the complexity of motion estimation is reduced and the quality of the reconstruction image at the same bit-rate as Multi-Resolution Motion Estimation(MRME) is improved.展开更多
A new compensation method for angular rate estimation of non-gyro inertial measurement unit （NGIMU） is proposed in terms of the existence of aecelerometer mounting error, which seriously affects the precision of nav...A new compensation method for angular rate estimation of non-gyro inertial measurement unit （NGIMU） is proposed in terms of the existence of aecelerometer mounting error, which seriously affects the precision of navigation parameter estimation. Using the accelerometer output error function, the algorithm compensates the posture parameters in the traditional algorithm of angular rate estimation to reduce the accelerometer mounting error. According to the traditional aceelerometer configurations, a novel nine-accelerometer confi-guration of NGIMU is presented with its mathematic model constructed. The semi-hardware simulations of the proposed algorithm are investigated based on the presented NGIMU configuration, and the results show the effectivity of the new algorithm.展开更多
The article states about reactive power compensation methods for circuits with non-sinusoidal voltages. An basic introduction to reactive power theory has been given, together with the optimal capacitance selection th...The article states about reactive power compensation methods for circuits with non-sinusoidal voltages. An basic introduction to reactive power theory has been given, together with the optimal capacitance selection theory. There have been presented selected theories application in order to compensate the reactive power in one-phase circuits. The measurement results before the compensation have been discussed and measurement results after compensation of an actual object supplied from an non-sinusoidal voltage source were presented. The algorithms of optimal capacity selection were given, which connected in parallel to the circuit with inductive character will cause current root-mean-square value minimization. The measurement results after applying the reactive power minimization algorithm have shown improvement in compensation of strongly nonlinear receivers supplied with distorted signals.展开更多
Atomic force microscope （AFM）, as an important instrument in micro/nano operation, has been widely used to measure sampie＇s height information. However, the so called compression effect, due to force aroused from t...Atomic force microscope （AFM）, as an important instrument in micro/nano operation, has been widely used to measure sampie＇s height information. However, the so called compression effect, due to force aroused from the contact of AFM tip with a sample surface, would result in imprecision of the surface＇s height measurement, i.e., the measured height is lower than expected. Up to now, there is not any effective and rapid method to attenuate this kind of measurement error. Thus, in this paper, an algorithm to obtain high accurate height measurement is proposed. Firstly, the concept of force curve is used to analyze the basic principle of the compression effect. Secondly, an automatic compensation method by fusing the height signal and the deflection signal is proposed. The proposed algorithm can also be used to obtain a surface elasticity image. Finally, in order to validate the proposed method, two experiments are conducted with respect to mufti-wall nano-carbon tubes on a silicon substrate and graphemes on a mica substrate.展开更多
文摘O436.3 97010099复合补偿法测量波片=Measurement of waveplate by combination compensation[刊,中]/薛庆文(济宁教育学院.山东,济宁(272117))∥量子电子学.—1996,13(2).—178介绍的复合补偿法是依据波片的复合理论,采用任意波片作为补偿片。
基金Supported by the National Natural Science Foundation of China (No. 60803036)the Scientific Research Fund of Heilongjiang Provincial Education Department (No.11531013)
文摘Aiming at the higher bit-rate occupation of motion vector encoding and more time load of full-searching strategies, a multi-resolution motion estimation and compensation algorithm based on adjacent prediction of frame difference was proposed.Differential motion detection was employed to image sequences and proper threshold was adopted to identify the connected region.Then the motion region was extracted to carry out motion estimation and motion compensation on it.The experiment results show that the encoding efficiency of motion vector is promoted, the complexity of motion estimation is reduced and the quality of the reconstruction image at the same bit-rate as Multi-Resolution Motion Estimation(MRME) is improved.
基金Sponsored by the National Natural Science Foundation of China (Grant No.60901042)the Natural Science Foundation of Heilongjiang Province(Grant No.F2007-08)
文摘A new compensation method for angular rate estimation of non-gyro inertial measurement unit （NGIMU） is proposed in terms of the existence of aecelerometer mounting error, which seriously affects the precision of navigation parameter estimation. Using the accelerometer output error function, the algorithm compensates the posture parameters in the traditional algorithm of angular rate estimation to reduce the accelerometer mounting error. According to the traditional aceelerometer configurations, a novel nine-accelerometer confi-guration of NGIMU is presented with its mathematic model constructed. The semi-hardware simulations of the proposed algorithm are investigated based on the presented NGIMU configuration, and the results show the effectivity of the new algorithm.
文摘The article states about reactive power compensation methods for circuits with non-sinusoidal voltages. An basic introduction to reactive power theory has been given, together with the optimal capacitance selection theory. There have been presented selected theories application in order to compensate the reactive power in one-phase circuits. The measurement results before the compensation have been discussed and measurement results after compensation of an actual object supplied from an non-sinusoidal voltage source were presented. The algorithms of optimal capacity selection were given, which connected in parallel to the circuit with inductive character will cause current root-mean-square value minimization. The measurement results after applying the reactive power minimization algorithm have shown improvement in compensation of strongly nonlinear receivers supplied with distorted signals.
基金supported by the CAS FEA International Partnership Program for Creative Research Teams
文摘Atomic force microscope （AFM）, as an important instrument in micro/nano operation, has been widely used to measure sampie＇s height information. However, the so called compression effect, due to force aroused from the contact of AFM tip with a sample surface, would result in imprecision of the surface＇s height measurement, i.e., the measured height is lower than expected. Up to now, there is not any effective and rapid method to attenuate this kind of measurement error. Thus, in this paper, an algorithm to obtain high accurate height measurement is proposed. Firstly, the concept of force curve is used to analyze the basic principle of the compression effect. Secondly, an automatic compensation method by fusing the height signal and the deflection signal is proposed. The proposed algorithm can also be used to obtain a surface elasticity image. Finally, in order to validate the proposed method, two experiments are conducted with respect to mufti-wall nano-carbon tubes on a silicon substrate and graphemes on a mica substrate.
