According to the theory of testing aspherical surface by normal aberration compensation method,the designing method of quasi-universal compensator is studied.On the basis of third-order aberration theory,after calcula...According to the theory of testing aspherical surface by normal aberration compensation method,the designing method of quasi-universal compensator is studied.On the basis of third-order aberration theory,after calculating and optimizing with an optical design program,the structure parameters of a compensator are obtained.This new compensator could be used in Twyman-Green interferometer,and in measurement of a certain range of paraboloid ellipsoid and hyperboloid.The compensation accuracy is more than 0.02 λ .展开更多
A semi-empirical adsorption kinetic model was proposed with the time compensation method to describe the chemisorption of SO2 in flue gas by carbon adsorbents for flue gas purification.The change in adsorption capacit...A semi-empirical adsorption kinetic model was proposed with the time compensation method to describe the chemisorption of SO2 in flue gas by carbon adsorbents for flue gas purification.The change in adsorption capacity and adsorption rate with time at different water vapor concentrations and different SO2 concentrations was studied.The model was in good agreement with experimental data.The surface reaction was probably the rate controlling step in the early stage for SO2 adsorption by ZL50 activated carbon.The parameters m and n in the nth order adsorption kinetic model were related to the magnitude of the time compensation and adsorption driving force,respectively.The change of parameter n with water vapor concentrations and sulfur dioxide concentrations was studied and some physical implications were given.The sum of square errors was less than 1.0 and the average absolute percentage deviations ranged from 0.5 to 3.2.The kinetic model was compared with other models in the literature.展开更多
High-frequency seismic data components can be seriously attenuated during seismic wave propagation in unconsolidated （low-velocity） layers, resulting in reduced seismic resolution and signal-to-noise （S/N） ratio. ...High-frequency seismic data components can be seriously attenuated during seismic wave propagation in unconsolidated （low-velocity） layers, resulting in reduced seismic resolution and signal-to-noise （S/N） ratio. In this paper, first, based on Wiener filter theory, inverse filter calculations for near-surface absorption attenuation compensation were accomplished by analysis of the direct wave spectral components from different distances near the surface. The direct waves were generated by detonators in uphole shots and were acquired by receivers on the surface. The spatially varying inverse filters were designed to compensate for the frequency attenuation of 3D pre-stack CRG （common receiver-gather） data. After applying the filter to CRG data, the high frequency components were compensated with the low frequencies maintained. The seismic resolution and S/N ratio are enhanced and match better with synthetic seismograms and better meet the needs of geological interpretation.展开更多
Parts of complex surface are widely used now in many fields, and their detection has caused much concern. In China many manufactories still carry on the traditional way of manual detection, which requires highly skill...Parts of complex surface are widely used now in many fields, and their detection has caused much concern. In China many manufactories still carry on the traditional way of manual detection, which requires highly skilled personnel and efficiency is low. Some large manufactories have imported auto-detecting equipments, which require CAD data on the parts, or just divide the surface into several approximate planes for automatic detection. Phased-array system is seldom used, and the cost is high. Besides, most of the systems have not considered the automatic sensitivity compensation of parts with varying thickness. To improve the detection quality and efficiency of nondestructive test (NDT) of parts of complex surface, this paper puts forward an integrated ultrasonic NDT system characterized by: (1) Use of ultrasonic measurement and reverse of curved surface to solve the CAD data problem; (2) Use of an automatic sensitivity compensation algorithm (based on the part’s modelling information obtained in surface reverse) to fit the variety of the thickness; (3) Use of template matching and pseudo-color imaging to improve the quality of detection results. The system features integration of low cost mature technologies, and is suitable for detection of various parts of different complex surfaces in medium-and-small enterprises. The test results showed that the system can automatically detect parts of complex surface successfully, and that the inspection result is good and reliable.展开更多
The closed loop control model was built up for compensating the springback and enhancing the work piece precision.A coupled closed loop algorithm and a finite element method were developed to simulate and correct the ...The closed loop control model was built up for compensating the springback and enhancing the work piece precision.A coupled closed loop algorithm and a finite element method were developed to simulate and correct the springback of incremental sheet forming.A three-dimensional finite element model was established for simulation of springback in incremental sheet forming process.The closed loop algorithm of trajectory profile for the incremental sheet forming based on the wavelet transform combined with fast Fourier transform was constructed.The profile of processing tool path of shallow dishing with spherical surface was designed on the basis of the profile correction algorithm.The result shows that the algorithm can predict an ideal profile of processing track,and the springback error of incremental sheet forming is eliminated effectively.It has good convergence efficiency,and can improve the workpiece dimensional accuracy greatly.展开更多
The agency theory indicates the existence of costs as a way to mitigate conflicts between shareholders and managers, including： managerial compensation program, acquisition of shares by managers, monitoring of execut...The agency theory indicates the existence of costs as a way to mitigate conflicts between shareholders and managers, including： managerial compensation program, acquisition of shares by managers, monitoring of executives, and controlling shareholders. This study aims to determine the relevance of some variables related to compensation programs and of other determinants of the corporate debt level. It has considered a sample of 89 firms, which were analyzed through logistic regression （cross section）. The model created has indicated a level of predictive assertiveness of approximately 87%.展开更多
Atomic force microscope （AFM）, as an important instrument in micro/nano operation, has been widely used to measure sampie＇s height information. However, the so called compression effect, due to force aroused from t...Atomic force microscope （AFM）, as an important instrument in micro/nano operation, has been widely used to measure sampie＇s height information. However, the so called compression effect, due to force aroused from the contact of AFM tip with a sample surface, would result in imprecision of the surface＇s height measurement, i.e., the measured height is lower than expected. Up to now, there is not any effective and rapid method to attenuate this kind of measurement error. Thus, in this paper, an algorithm to obtain high accurate height measurement is proposed. Firstly, the concept of force curve is used to analyze the basic principle of the compression effect. Secondly, an automatic compensation method by fusing the height signal and the deflection signal is proposed. The proposed algorithm can also be used to obtain a surface elasticity image. Finally, in order to validate the proposed method, two experiments are conducted with respect to mufti-wall nano-carbon tubes on a silicon substrate and graphemes on a mica substrate.展开更多
文摘According to the theory of testing aspherical surface by normal aberration compensation method,the designing method of quasi-universal compensator is studied.On the basis of third-order aberration theory,after calculating and optimizing with an optical design program,the structure parameters of a compensator are obtained.This new compensator could be used in Twyman-Green interferometer,and in measurement of a certain range of paraboloid ellipsoid and hyperboloid.The compensation accuracy is more than 0.02 λ .
文摘A semi-empirical adsorption kinetic model was proposed with the time compensation method to describe the chemisorption of SO2 in flue gas by carbon adsorbents for flue gas purification.The change in adsorption capacity and adsorption rate with time at different water vapor concentrations and different SO2 concentrations was studied.The model was in good agreement with experimental data.The surface reaction was probably the rate controlling step in the early stage for SO2 adsorption by ZL50 activated carbon.The parameters m and n in the nth order adsorption kinetic model were related to the magnitude of the time compensation and adsorption driving force,respectively.The change of parameter n with water vapor concentrations and sulfur dioxide concentrations was studied and some physical implications were given.The sum of square errors was less than 1.0 and the average absolute percentage deviations ranged from 0.5 to 3.2.The kinetic model was compared with other models in the literature.
基金supported by China Petroleum Technology Innovation Fund Project(Grant No.0610740122)
文摘High-frequency seismic data components can be seriously attenuated during seismic wave propagation in unconsolidated （low-velocity） layers, resulting in reduced seismic resolution and signal-to-noise （S/N） ratio. In this paper, first, based on Wiener filter theory, inverse filter calculations for near-surface absorption attenuation compensation were accomplished by analysis of the direct wave spectral components from different distances near the surface. The direct waves were generated by detonators in uphole shots and were acquired by receivers on the surface. The spatially varying inverse filters were designed to compensate for the frequency attenuation of 3D pre-stack CRG （common receiver-gather） data. After applying the filter to CRG data, the high frequency components were compensated with the low frequencies maintained. The seismic resolution and S/N ratio are enhanced and match better with synthetic seismograms and better meet the needs of geological interpretation.
文摘Parts of complex surface are widely used now in many fields, and their detection has caused much concern. In China many manufactories still carry on the traditional way of manual detection, which requires highly skilled personnel and efficiency is low. Some large manufactories have imported auto-detecting equipments, which require CAD data on the parts, or just divide the surface into several approximate planes for automatic detection. Phased-array system is seldom used, and the cost is high. Besides, most of the systems have not considered the automatic sensitivity compensation of parts with varying thickness. To improve the detection quality and efficiency of nondestructive test (NDT) of parts of complex surface, this paper puts forward an integrated ultrasonic NDT system characterized by: (1) Use of ultrasonic measurement and reverse of curved surface to solve the CAD data problem; (2) Use of an automatic sensitivity compensation algorithm (based on the part’s modelling information obtained in surface reverse) to fit the variety of the thickness; (3) Use of template matching and pseudo-color imaging to improve the quality of detection results. The system features integration of low cost mature technologies, and is suitable for detection of various parts of different complex surfaces in medium-and-small enterprises. The test results showed that the system can automatically detect parts of complex surface successfully, and that the inspection result is good and reliable.
基金Project(50175034) supported by the National Natural Science Foundation of China
文摘The closed loop control model was built up for compensating the springback and enhancing the work piece precision.A coupled closed loop algorithm and a finite element method were developed to simulate and correct the springback of incremental sheet forming.A three-dimensional finite element model was established for simulation of springback in incremental sheet forming process.The closed loop algorithm of trajectory profile for the incremental sheet forming based on the wavelet transform combined with fast Fourier transform was constructed.The profile of processing tool path of shallow dishing with spherical surface was designed on the basis of the profile correction algorithm.The result shows that the algorithm can predict an ideal profile of processing track,and the springback error of incremental sheet forming is eliminated effectively.It has good convergence efficiency,and can improve the workpiece dimensional accuracy greatly.
文摘The agency theory indicates the existence of costs as a way to mitigate conflicts between shareholders and managers, including： managerial compensation program, acquisition of shares by managers, monitoring of executives, and controlling shareholders. This study aims to determine the relevance of some variables related to compensation programs and of other determinants of the corporate debt level. It has considered a sample of 89 firms, which were analyzed through logistic regression （cross section）. The model created has indicated a level of predictive assertiveness of approximately 87%.
基金supported by the CAS FEA International Partnership Program for Creative Research Teams
文摘Atomic force microscope （AFM）, as an important instrument in micro/nano operation, has been widely used to measure sampie＇s height information. However, the so called compression effect, due to force aroused from the contact of AFM tip with a sample surface, would result in imprecision of the surface＇s height measurement, i.e., the measured height is lower than expected. Up to now, there is not any effective and rapid method to attenuate this kind of measurement error. Thus, in this paper, an algorithm to obtain high accurate height measurement is proposed. Firstly, the concept of force curve is used to analyze the basic principle of the compression effect. Secondly, an automatic compensation method by fusing the height signal and the deflection signal is proposed. The proposed algorithm can also be used to obtain a surface elasticity image. Finally, in order to validate the proposed method, two experiments are conducted with respect to mufti-wall nano-carbon tubes on a silicon substrate and graphemes on a mica substrate.
