气液固三相流化床层膨胀特性实验分析

为分析气液固三相流化床床层特性,选用两种粒径接近、密度不同的颗粒:塑料颗粒(湿堆积密度1 273 kg/m^3,平均直径750μm)和陶粒(湿堆积密度1 680 kg/m^3,平均直径800μm),以常温空气为气相、水为液相。实验装置内径0.13 m,全床高度4.75 m,实验液柱高度3.5 m,床内颗粒有足够的膨胀高度。分别测试了液速0—13 mm/s,气速0—12 mm/s条件下的床层高度,研究气液速对塑料颗粒和陶粒床层膨胀率的影响。研究结果显示液速较低时床层收缩,随着气速增加,收缩率增大;液速较高时,膨胀率大于0,随着表观气速的增加,膨胀率先降低,表观气速大于临界值后,膨胀率将增大;除高气速外,床层膨胀率总是随着液速的升高而增大。相同气速、液速条件下,大密度陶粒的床层膨胀(收缩)率大于塑料颗粒。

Experimental study on pressure fluctuation characteristics of slug flow in horizontal curved tubes

In order to study the pressure characteristics of slug flow in horizontal curved tubes,two kinds of curved tubes with central angle 45° and 90° respectively are studied,of which are with 0. 5m circumference and 26 mm inner diameter are used. When the superficial liquid velocity or the superficial gas velocity is constant,the pressure fluctuations and the probability distribution of the average velocity of slug flow are clear for all of the five experimental conditions. The results of experiment show that the pressure characteristics of slug flow in curved tubes have periodic fluctuations. With the rise of central angle,the period of pressure fluctuation is more obvious. The system pressure of the slug flow increases with the increasing of superficial liquid/gas velocity. Meanwhile,the probability distribution of pressure signal shows regularity,such as unimodal,bimodal or multimodal.