The radioactivities of 210Pb and 137Cs have been measured to estimate the dates of the sediments of a surface core （QH0407-C-2） in the northern basin of Lake Qinghai. The sedimentation rate derived from 210Pb radioa...The radioactivities of 210Pb and 137Cs have been measured to estimate the dates of the sediments of a surface core （QH0407-C-2） in the northern basin of Lake Qinghai. The sedimentation rate derived from 210Pb radioactivity correlates well with that inferred from （137）Cs radioactivity. The dates calculated from depth sedimentation rate （cm/a） are similar to those derived from mass accumulation rate （g·cm-2·a-1） between 0-5 cm, but are significantly different below 5 cm, which has been ascribed to the compaction of surface sediments during early diagenesis. The dates derived from mass accumulation rate are consistent with those calculated from the AMS 14C dating model. The precipitation-controlled indices based on the chronology data derived from mass accumulation rate are similar in trends to the precipitation reconstructed from tree rings in adjacent region, which further verifies the reliability of the geochronology data.展开更多
CdS/ZnS core-shell microparticles were prepared by a simple two-step method combining ultrasonic spray pyrolysis and chemical bath deposition.The core-shell structures showed enhanced photocatalytic properties compare...CdS/ZnS core-shell microparticles were prepared by a simple two-step method combining ultrasonic spray pyrolysis and chemical bath deposition.The core-shell structures showed enhanced photocatalytic properties compared with those of CdS or ZnS spherical particles.CdS/ZnS photocatalysts with different amount of ZnS loaded as shells were prepared by adjusting the concentrations of Zn and S precursors during synthesis.The optical properties and photocatalytic activity for hydrogen production were investigated and the amount of ZnS loaded as shell was optimized.Thermal annealing and hydrothermal sulfurization treatments were applied to the core-shell structure and both treatments enhanced the material＇s photocatalytic activity and stability by eliminating crystalline defects and surface states.The result showed that thermal annealing treatment improved the bulk crystallinity and hydrothermal sulfurization improved the surface properties.The sample subjected to both treatments showed the highest photocatalytic activity.These results indicate that CdS/ZnS core-shell microspheres are a simple structure that can be used as efficient photocatalysts.The hydrothermal sulfurization treatment may also be a useful surface treatment for metal sulfide photocatalysts.The simple two-step method provides a promising approach to the large-scale synthesis of core-shell microsphere catalysts.展开更多
In order to solve the drifting away of thermal fog droplets during thermal spraying and the incompatibility between fog droplet carrier and conventional com- mercial agro-chemicals, the fog droplet carrier, surfactant...In order to solve the drifting away of thermal fog droplets during thermal spraying and the incompatibility between fog droplet carrier and conventional com- mercial agro-chemicals, the fog droplet carrier, surfactant, condensation nucleus ma- terial and antifreeze, dispersant, thickener and defoamer were screened and assem- bled to develop a thermal fog sedimentation stabilizer in this study, thereby provid- ing technical support for application and promotion of thermal spraying technology in pest and disease control in crops.展开更多
A Ni layer with a thickness of about 100 nm was sputtered on Cu substrates,followed by an ultrasonic seeding with nanodiamond suspension.High-quality diamond film with its crystalline grains close to thermal equilibri...A Ni layer with a thickness of about 100 nm was sputtered on Cu substrates,followed by an ultrasonic seeding with nanodiamond suspension.High-quality diamond film with its crystalline grains close to thermal equilibrium shape was deposited on Cu substrates by hot-filament chemical vapor deposition（HF-CVD）,and the sp2 carbon content was less than 5.56%.The nucleation and growth of diamond film were investigated by micro-Raman spectroscopy,scanning electron microscopy,and X-ray diffraction.The results show that the nucleation density of diamond on the Ni-modified Cu substrates is 10 times higher than that on blank Cu substrates.The enhancement mechanism of the nucleation kinetics by Ni modification layer results from two effects：namely,the nanometer rough Ni-modified surface shows an improved absorption of nanodiamond particles that act as starting points for the diamond nucleation during HF-CVD process;the strong catalytic effect of the Ni-modified surface causes the formation of graphite layer that acts as an intermediate to facilitate diamond nucleation quickly.展开更多
Linkers were assembled on a glass surface based on the hydrolysis and condensation of 3-glycidoxy￣propyltrimethoxysilane (GPS). After the assembly of GPS, four approaches were tried to open the ending epoxide group o...Linkers were assembled on a glass surface based on the hydrolysis and condensation of 3-glycidoxy￣propyltrimethoxysilane (GPS). After the assembly of GPS, four approaches were tried to open the ending epoxide group of GPS or to further elongate the linkers. The effect of these approaches on DNA in situ synthesis and hybridization was investigated. For the spacing of the synthesis initiation sites, the wettability of the support and the length of the linking group that attaches the initiation site to the surface have direct influences on the yield of coupling reactions and the subsequent hybridization events. X-ray photoelectron spectroscopy (XPS) and mean contact angles of deionized water of the above slides were measured to assess the linker's characteristics in each procedure. It was proved that the glass slides were successfully modified and became excellent supports for the oligonucleotides synthesis. In addition, it proved best for the in situ oligonucleotides synthesis that a glass slide was in turn treated with ethylenediamine, glutaradehyde, ethanolamine and sodium borohydride solution at ambient temperature after silanized with GPS.展开更多
Cosmogenic Ne isotopes are stable and are routinely used for constraining the timing of events and the rate of surface change beyond the limit that can be studied with radionuclides ^10Be, ^26Al, and ^36Cl. Cosmogenic...Cosmogenic Ne isotopes are stable and are routinely used for constraining the timing of events and the rate of surface change beyond the limit that can be studied with radionuclides ^10Be, ^26Al, and ^36Cl. Cosmogenic Ne analysis can be used in quartz and in a range of other minerals. Analysis typically requires significantly less material than do cosmogenic ^10Be and ^26Al, opening up the technique for small samples--individual pebbles in fiver sediments, for example. Analysis is easier and faster than for radionuclides, not least because Ne measurements do not require significant chemical procedures. However, the presence of other sources of Ne in minerals tends to restrict the use of cosmogenic ^21Ne to old landscapes and long exposure durations. In this review we briefly outline the background of cosmogenic Ne production in rocks and minerals at the Earth＇s surface, then document the key uses of the technique by highlighting some earlier studies, and finish with a short perspective on the future of the technique.展开更多
The authors’ surveys in May-June 1999 (two cruises) at six sampling stations near nuclear power plants (NPP) and marine fish culture zones in Daya Bay, Guangdong, revealed species composition, densities and body-size...The authors’ surveys in May-June 1999 (two cruises) at six sampling stations near nuclear power plants (NPP) and marine fish culture zones in Daya Bay, Guangdong, revealed species composition, densities and body-size of the sea surface microlayer (SM) zooplankton (>35 μm). Results showed that protozoans and copepod nauplii were the predominant components, accounting for 65.40% to 95.56% of total zooplankton in abundance. The size-frequency distributions showed that the frequency of micro-zooplankton (0.02-0.2 mm) reached 0.8235. The SM zooplankton community structure revealed in the present study was quite different from that revealed by investigations in the 1980s in Daya Bay. Difference of sampling method has important influence on the obtained zooplankton community structure. SM zooplankton consisted of micro- and mesozooplankton (0.2-2.0 mm), with micro-zooplankton being predominant. Some possible cause-effect relations between the zooplankton community structure and mariculture, nuclear power plants cooling systems and sampling method are discussed.展开更多
The hydrogenation of CO_(2) into methanol has attracted much attention and In_(2)O_(3) is a promising catalyst.Introducing metal elements into In_(2)O_(3)(M/In_(2)O_(3))is one of the main strategies to improve its per...The hydrogenation of CO_(2) into methanol has attracted much attention and In_(2)O_(3) is a promising catalyst.Introducing metal elements into In_(2)O_(3)(M/In_(2)O_(3))is one of the main strategies to improve its performance.However,its mechanism and active sites remain unclear and need to be further elucidated.Here,the noble‐metal‐free In_(x)‐Co_(y) oxides catalysts were prepared.Much‐improved performance and obvious product selectivity shift were observed.The optimized catalyst(In_(1)‐Co_(4))(9.7 mmol g_(cat)^(–1) h^(–1))showed five times methanol yields than pure In_(2)O_(3)(2.2 mmol g_(cat)^(–1) h^(–1))(P=4.0 MPa,T=300°C,GHSV=24000 cm^(3)_(STP) g_(cat)^(–1) h^(–1),H_(2):CO_(2)=3).And the cobalt‐catalyzed CO_(2) methanation activity was suppressed,although cobalt was most of the metal element.To unravel this selectivity shift,detailed catalysts performance evaluation,together with several in‐situ and ex‐situ characterizations,were employed on cobalt and In‐Co for comparative study.The results indicated CO_(2) hydrogenation on cobalt and In‐Co catalyst both followed the formate pathway,and In‐Co reconstructed and generated a surface In_(2)O_(3)‐enriched core‐shell‐like structure under a reductive atmosphere.The enriched In_(2)O_(3) at the surface significantly enhanced CO_(2) adsorption capacity and well stabilized the intermediates of CO_(2) hydrogenation.CO_(2) and carbon‐containing intermediates adsorbed much stronger on In‐Co than cobalt led to a feasible surface C/H ratio,thus allowing the*CH_(3)O to desorb to produce CH_(3)OH instead of being over‐hydrogenated to CH_(4).展开更多
The interaction between N, N′-bis（dimethyldodecyl）-1,6-hexanediammoniumdibromide （G12-6-12） and cetyltrimethylammonium bromide （CTAB） in D20 aqueous medium has been investigated by NMR at 298 K. The G12-6-12 an...The interaction between N, N′-bis（dimethyldodecyl）-1,6-hexanediammoniumdibromide （G12-6-12） and cetyltrimethylammonium bromide （CTAB） in D20 aqueous medium has been investigated by NMR at 298 K. The G12-6-12 and CTAB are about 0.773 and measured critical micelle concentration （cmc） of 0.668 mmol/L, respectively. The cmc^＊ （cmc of mixture） values are less than CMC^＊ （cmc of ideally mixed solution） in the mixed system, and the interaction parameter βM〈0 at different molar fractions α of G12-6-12 in the mixed systems, but just when α≤0.3, cmc^＊ values are much smaller than CMC^＊, and βM satisfies the relation of ｜βM｜〉｜ln（cmc1/cmc2）｜ （cmcl： cmc of pure G12-6-12 and cmc2： cmc Of pure CTAB）. The results indicate that there exists synergism between G12-6-12 and CTAB, and they can form mixed micelles, which is further proven by 2D NOESY and self-diffusion coefficient D experiments. There are intermolecular cross peaks between G12-6-12 and CTAB in 2D NOESY, and the radius of micelles in mixed solution is bigger than that in G12-6-12 pure solution in D experiments, indicating there are mixed micelles. However, when α〉0.3, we find that cmc^＊≈CMC^＊, βM≈0, obviously, the two surfactants are almost ideal mixing fitting the pseudo-phase separation model and regular solution theory.展开更多
[Objective] The aim was to study cloning and prokaryotic expression of P23 major surface protein gene of Theileria sergenti. [Method] A pair of specific primers was designed according to the sequence of P23 major surf...[Objective] The aim was to study cloning and prokaryotic expression of P23 major surface protein gene of Theileria sergenti. [Method] A pair of specific primers was designed according to the sequence of P23 major surface protein of T. sergenti (D84447).The P23 gene was amplified by PCR from genomic DNA of T. sergenti and cloned into pMD18-T vector to construct recombinant clonal vector pMD18-P23. Positive clones were identified by PCR screening and restriction digestion. A recombinant expression plasmid pGEX-4T-P23 was constructed by subcloning the cloned P23 gene into the linearized pGEX-4T-1 vector and transformed into E. coli BL21. After introduction by IPTG,the expressed fusion protein was identified by SDS-PAGE and Western-blotting. [Result] The cloned gene has a total length of 507 bp. Sequencing result showed that the nucleotide sequence of the cloned P23 gene shared 99.4% identity with that of P23 published in GenBank (D84447). The expressed fusion protein was 46 ku in molecular mass. Induction opportunity of zhours after culture inoculation was the best,the induction time of 6 h was the best,and induction temperature of 34 ℃ was the best as well,IPTG of 1 mmol/L had little effect on the expression. Western-blotting indicated that recombinant protein was recognized by specific antibody. [Conclusion] This study would lay a foundation for further research on the prevention and diagnose of T. sergenti.展开更多
The potential energy surface of H（13） proton in base cytosine of the DNA molecules is calculated at the Caussian 98 MP2/6-311C（d,p） level. Two potential wells are found. One corresponds to the normal cytosine, whi...The potential energy surface of H（13） proton in base cytosine of the DNA molecules is calculated at the Caussian 98 MP2/6-311C（d,p） level. Two potential wells are found. One corresponds to the normal cytosine, while the other corresponds to its trans-imino tautomer. The estimated tunneling probability of the H（13） proton from one well to another well shows that the life time of the proton staying in one of these wells is about 600 yrs. It is too long to let tautomers of cytosine be in thermodynamical equilibrium in a room temperature gas phase experiment.展开更多
基金This work is supported by the National Basic Research Program of China(No.2004CB720207), and by the National Natural Science Foundation of China (No.40599422).
文摘The radioactivities of 210Pb and 137Cs have been measured to estimate the dates of the sediments of a surface core （QH0407-C-2） in the northern basin of Lake Qinghai. The sedimentation rate derived from 210Pb radioactivity correlates well with that inferred from （137）Cs radioactivity. The dates calculated from depth sedimentation rate （cm/a） are similar to those derived from mass accumulation rate （g·cm-2·a-1） between 0-5 cm, but are significantly different below 5 cm, which has been ascribed to the compaction of surface sediments during early diagenesis. The dates derived from mass accumulation rate are consistent with those calculated from the AMS 14C dating model. The precipitation-controlled indices based on the chronology data derived from mass accumulation rate are similar in trends to the precipitation reconstructed from tree rings in adjacent region, which further verifies the reliability of the geochronology data.
基金supported by the National Natural Science Foundation of China(51202186,51323011)the Fundamental Research Funds for the Central University(xjj2016039)~~
文摘CdS/ZnS core-shell microparticles were prepared by a simple two-step method combining ultrasonic spray pyrolysis and chemical bath deposition.The core-shell structures showed enhanced photocatalytic properties compared with those of CdS or ZnS spherical particles.CdS/ZnS photocatalysts with different amount of ZnS loaded as shells were prepared by adjusting the concentrations of Zn and S precursors during synthesis.The optical properties and photocatalytic activity for hydrogen production were investigated and the amount of ZnS loaded as shell was optimized.Thermal annealing and hydrothermal sulfurization treatments were applied to the core-shell structure and both treatments enhanced the material＇s photocatalytic activity and stability by eliminating crystalline defects and surface states.The result showed that thermal annealing treatment improved the bulk crystallinity and hydrothermal sulfurization improved the surface properties.The sample subjected to both treatments showed the highest photocatalytic activity.These results indicate that CdS/ZnS core-shell microspheres are a simple structure that can be used as efficient photocatalysts.The hydrothermal sulfurization treatment may also be a useful surface treatment for metal sulfide photocatalysts.The simple two-step method provides a promising approach to the large-scale synthesis of core-shell microsphere catalysts.
基金Supported by Anhui Agricultural Science and Technology Innovation Fund(16A1132)Science and Technology Major Project of Anhui Province(15CZZ03132)Special Fund for Talent Development in Anhui Province(13C1109)~~
文摘In order to solve the drifting away of thermal fog droplets during thermal spraying and the incompatibility between fog droplet carrier and conventional com- mercial agro-chemicals, the fog droplet carrier, surfactant, condensation nucleus ma- terial and antifreeze, dispersant, thickener and defoamer were screened and assem- bled to develop a thermal fog sedimentation stabilizer in this study, thereby provid- ing technical support for application and promotion of thermal spraying technology in pest and disease control in crops.
基金Project(20110933K) supported by the State Key Laboratory of Powder Metallurgy,ChinaProject(2012QNZT002) supported by the Freedom Explore Program of Central South University,ChinaProject(CSUZC2012024) supported by the Open-End Fund for the Valuable and Precision Instruments of Central South University,China
文摘A Ni layer with a thickness of about 100 nm was sputtered on Cu substrates,followed by an ultrasonic seeding with nanodiamond suspension.High-quality diamond film with its crystalline grains close to thermal equilibrium shape was deposited on Cu substrates by hot-filament chemical vapor deposition（HF-CVD）,and the sp2 carbon content was less than 5.56%.The nucleation and growth of diamond film were investigated by micro-Raman spectroscopy,scanning electron microscopy,and X-ray diffraction.The results show that the nucleation density of diamond on the Ni-modified Cu substrates is 10 times higher than that on blank Cu substrates.The enhancement mechanism of the nucleation kinetics by Ni modification layer results from two effects：namely,the nanometer rough Ni-modified surface shows an improved absorption of nanodiamond particles that act as starting points for the diamond nucleation during HF-CVD process;the strong catalytic effect of the Ni-modified surface causes the formation of graphite layer that acts as an intermediate to facilitate diamond nucleation quickly.
文摘Linkers were assembled on a glass surface based on the hydrolysis and condensation of 3-glycidoxy￣propyltrimethoxysilane (GPS). After the assembly of GPS, four approaches were tried to open the ending epoxide group of GPS or to further elongate the linkers. The effect of these approaches on DNA in situ synthesis and hybridization was investigated. For the spacing of the synthesis initiation sites, the wettability of the support and the length of the linking group that attaches the initiation site to the surface have direct influences on the yield of coupling reactions and the subsequent hybridization events. X-ray photoelectron spectroscopy (XPS) and mean contact angles of deionized water of the above slides were measured to assess the linker's characteristics in each procedure. It was proved that the glass slides were successfully modified and became excellent supports for the oligonucleotides synthesis. In addition, it proved best for the in situ oligonucleotides synthesis that a glass slide was in turn treated with ethylenediamine, glutaradehyde, ethanolamine and sodium borohydride solution at ambient temperature after silanized with GPS.
基金supported by the basic scientific research fund, Institute of Geology, China Earthquake Administration (Grant Nos. IGCEA1504 and IGCEA1417)
文摘Cosmogenic Ne isotopes are stable and are routinely used for constraining the timing of events and the rate of surface change beyond the limit that can be studied with radionuclides ^10Be, ^26Al, and ^36Cl. Cosmogenic Ne analysis can be used in quartz and in a range of other minerals. Analysis typically requires significantly less material than do cosmogenic ^10Be and ^26Al, opening up the technique for small samples--individual pebbles in fiver sediments, for example. Analysis is easier and faster than for radionuclides, not least because Ne measurements do not require significant chemical procedures. However, the presence of other sources of Ne in minerals tends to restrict the use of cosmogenic ^21Ne to old landscapes and long exposure durations. In this review we briefly outline the background of cosmogenic Ne production in rocks and minerals at the Earth＇s surface, then document the key uses of the technique by highlighting some earlier studies, and finish with a short perspective on the future of the technique.
文摘The authors’ surveys in May-June 1999 (two cruises) at six sampling stations near nuclear power plants (NPP) and marine fish culture zones in Daya Bay, Guangdong, revealed species composition, densities and body-size of the sea surface microlayer (SM) zooplankton (>35 μm). Results showed that protozoans and copepod nauplii were the predominant components, accounting for 65.40% to 95.56% of total zooplankton in abundance. The size-frequency distributions showed that the frequency of micro-zooplankton (0.02-0.2 mm) reached 0.8235. The SM zooplankton community structure revealed in the present study was quite different from that revealed by investigations in the 1980s in Daya Bay. Difference of sampling method has important influence on the obtained zooplankton community structure. SM zooplankton consisted of micro- and mesozooplankton (0.2-2.0 mm), with micro-zooplankton being predominant. Some possible cause-effect relations between the zooplankton community structure and mariculture, nuclear power plants cooling systems and sampling method are discussed.
文摘The hydrogenation of CO_(2) into methanol has attracted much attention and In_(2)O_(3) is a promising catalyst.Introducing metal elements into In_(2)O_(3)(M/In_(2)O_(3))is one of the main strategies to improve its performance.However,its mechanism and active sites remain unclear and need to be further elucidated.Here,the noble‐metal‐free In_(x)‐Co_(y) oxides catalysts were prepared.Much‐improved performance and obvious product selectivity shift were observed.The optimized catalyst(In_(1)‐Co_(4))(9.7 mmol g_(cat)^(–1) h^(–1))showed five times methanol yields than pure In_(2)O_(3)(2.2 mmol g_(cat)^(–1) h^(–1))(P=4.0 MPa,T=300°C,GHSV=24000 cm^(3)_(STP) g_(cat)^(–1) h^(–1),H_(2):CO_(2)=3).And the cobalt‐catalyzed CO_(2) methanation activity was suppressed,although cobalt was most of the metal element.To unravel this selectivity shift,detailed catalysts performance evaluation,together with several in‐situ and ex‐situ characterizations,were employed on cobalt and In‐Co for comparative study.The results indicated CO_(2) hydrogenation on cobalt and In‐Co catalyst both followed the formate pathway,and In‐Co reconstructed and generated a surface In_(2)O_(3)‐enriched core‐shell‐like structure under a reductive atmosphere.The enriched In_(2)O_(3) at the surface significantly enhanced CO_(2) adsorption capacity and well stabilized the intermediates of CO_(2) hydrogenation.CO_(2) and carbon‐containing intermediates adsorbed much stronger on In‐Co than cobalt led to a feasible surface C/H ratio,thus allowing the*CH_(3)O to desorb to produce CH_(3)OH instead of being over‐hydrogenated to CH_(4).
文摘The interaction between N, N′-bis（dimethyldodecyl）-1,6-hexanediammoniumdibromide （G12-6-12） and cetyltrimethylammonium bromide （CTAB） in D20 aqueous medium has been investigated by NMR at 298 K. The G12-6-12 and CTAB are about 0.773 and measured critical micelle concentration （cmc） of 0.668 mmol/L, respectively. The cmc^＊ （cmc of mixture） values are less than CMC^＊ （cmc of ideally mixed solution） in the mixed system, and the interaction parameter βM〈0 at different molar fractions α of G12-6-12 in the mixed systems, but just when α≤0.3, cmc^＊ values are much smaller than CMC^＊, and βM satisfies the relation of ｜βM｜〉｜ln（cmc1/cmc2）｜ （cmcl： cmc of pure G12-6-12 and cmc2： cmc Of pure CTAB）. The results indicate that there exists synergism between G12-6-12 and CTAB, and they can form mixed micelles, which is further proven by 2D NOESY and self-diffusion coefficient D experiments. There are intermolecular cross peaks between G12-6-12 and CTAB in 2D NOESY, and the radius of micelles in mixed solution is bigger than that in G12-6-12 pure solution in D experiments, indicating there are mixed micelles. However, when α〉0.3, we find that cmc^＊≈CMC^＊, βM≈0, obviously, the two surfactants are almost ideal mixing fitting the pseudo-phase separation model and regular solution theory.
基金Supported by Science and Technology Development Program of Jilin Province (20050703-4)~~
文摘[Objective] The aim was to study cloning and prokaryotic expression of P23 major surface protein gene of Theileria sergenti. [Method] A pair of specific primers was designed according to the sequence of P23 major surface protein of T. sergenti (D84447).The P23 gene was amplified by PCR from genomic DNA of T. sergenti and cloned into pMD18-T vector to construct recombinant clonal vector pMD18-P23. Positive clones were identified by PCR screening and restriction digestion. A recombinant expression plasmid pGEX-4T-P23 was constructed by subcloning the cloned P23 gene into the linearized pGEX-4T-1 vector and transformed into E. coli BL21. After introduction by IPTG,the expressed fusion protein was identified by SDS-PAGE and Western-blotting. [Result] The cloned gene has a total length of 507 bp. Sequencing result showed that the nucleotide sequence of the cloned P23 gene shared 99.4% identity with that of P23 published in GenBank (D84447). The expressed fusion protein was 46 ku in molecular mass. Induction opportunity of zhours after culture inoculation was the best,the induction time of 6 h was the best,and induction temperature of 34 ℃ was the best as well,IPTG of 1 mmol/L had little effect on the expression. Western-blotting indicated that recombinant protein was recognized by specific antibody. [Conclusion] This study would lay a foundation for further research on the prevention and diagnose of T. sergenti.
基金The project supported by National Natural Science Foundation of China under Grant Nos. 10305001 and 10475002 with the calculations supported by the High Performance Computing Center of China （Beijing）
文摘The potential energy surface of H（13） proton in base cytosine of the DNA molecules is calculated at the Caussian 98 MP2/6-311C（d,p） level. Two potential wells are found. One corresponds to the normal cytosine, while the other corresponds to its trans-imino tautomer. The estimated tunneling probability of the H（13） proton from one well to another well shows that the life time of the proton staying in one of these wells is about 600 yrs. It is too long to let tautomers of cytosine be in thermodynamical equilibrium in a room temperature gas phase experiment.
