表面水质遥感监测研究

主要讨论了应用多种传感器遥感技术进行表面水质监测研究的有效性。首先论述了纯水和不同水质的波谱特性 ,然后以芬兰海湾和芬兰南部湖泊为应用实例 ,进行多种遥感数据和主要水质参数之间的相关性分析 ,从而确定不同波谱段是否可以有效地监测表面水质的变化情况。本研究为新一代传感器的设计提供水质监测的重要参数 ,进一步的试验研究仍在进行之中。

柔性脂质体的促渗作用研究(英文)

In this article different types of ultradeformable liposomes were designed and the properties of transdermal delivery were studied with sodium salicylate as model drug. These results showed that liposomes with strong hydrophilic surfactant added is a new type of penetration enhancer.

Development of a New Index for Integrating Landscape Patterns with Ecological Processes at Watershed Scale

Understanding the relationship between landscape pattems and ecological processes has been a central yet challenging research theme in landscape ecology. Over the past decades, many landscape metrics have been proposed but few directly incorporated ecological processes. In this paper, we developed a landscape index, namely, location-weighted landscape index （LWLI） to highlight the role of landscape type in ecological processes, such as nutrient losses and soil erosion. Within the framework of the Lorenz curve theory, we develop this index by integrating land- scape pattern and point-based measurements at a watershed scale. The index can be used to characterize the contribution of landscape pattern to ecological processes （e.g. nutrient losses） with respect to a specific monitoring point in a watershed. Through a case study on nutrient losses in an agricultural area in northeastern China, we found that nutrient losses tended to be higher for a watershed with a higher LWLI value, and vice versa. It implied that LWLI can be used to evaluate the potential risk of nutrient losses or soil erosion by comparing their values across watersheds. In addition, this index can be extended to characterize ecological processes, such as the effect of landscape pattern on wildlife inhabitation and urban heat island effect. Finally, we discuss several problems that should be paid attention to when applying this index to a heterogeneous landscape site.

Sorption and Fractionation of a Peat Derived Humic Acid by Kaolinite, Montmorillonite, and Goethite

Sorption of humic acid （HA） on mineral surfaces has a profound interest regarding the fate of hydrophobic organic contaminants （HOCs） and carbon sequestration in soils. The objective of our study is to determine the fractionation behavior of HA upon sorption on mineral surfaces with varying surface properties. HA was coated sequentially on kaolinite （1：1 clay）, montmorillonite （2：1 clay）, and goethite （iron oxide） for four times. The unadsorbed HA fractions were characterized by elemental analysis, diffuse reflectance infrared Fourier transform spectroscopy （DRIFT）, and solid state 13C nuclear magnetic resonance spectroscopy （NMR）. The mineral-HA complexes were characterized by DRIFT. Polarity index [（N＋O）/C] revealed higher polarity of the unadsorbed HA fractions after coating on kaolinite, reflecting that relatively higher polarity fractions of HA remain unadsorbed. Sorption of aiiphatic alcohol fraction along with carbohydrate was prominent on kaolinite surface. DRIFT results of the unadsorbed HA fractions indicated more sorption of aiiphatic moieties on both kaolinite and montmorillonite. DRIFT results of the unadsorbed HA fractions after sorption on kaolinite and goethite showed the sorption of the proteinaceons fractions of HA. The HA fractions obtained after coating on goethite showed significant sorption of carboxylic moieties. The results mentioned above comply reasonably well with the DRIFT spectra of the minerai-HA complexes. ^13C NMR results showed higher sorption of anomeric C on kaolinite surface. Higher sorption of paraffinic fraction waS observed on montmorillonite. NMR data inferred the sorption of carboxylic moieties on goethite surface. Overall, this study showed that aliphatic moieties of HA preferentially sorbed on kaolinite and montmorillonite, while carboxylic functional groups play a significant role in sorption of HA on goethite. The sorbed fractions of HA may modify the mineral surface properties, and thus, the interaction with organic contaminants.

Effect of Electrochemical Treatment in Aqueous Ammonium Bicarbonate on Surface Properties of PAN-based Carbon Fibers

The surface properties of PAN-based carbon fibers electrochemically treated in aqueous ammonium bicarbonate before and after treatment were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and Dynamic Contact Angle Analysis (DCAA). The results of characterization indicated that the oxygen and nitrogen contents in carbon fiber surface were significantly increased by electrochemical treatment, and amide groups was introduced onto it, which was related with the electrolyte. The AFM photographs illustrated that the roughness of the fiber surface was also increased. The wettibality of the fibers was improved after treatment because the surface energy especially the polar part of it was increased.

Influence of nitrogen hetero-substitution on the electrochemical performance of coal-based activated carbons measured in non-aqueous electrolyte

Nitrogen-containing carbons were prepared by modification of activated carbons.The modified carbons were used as electrode materials with improved electrochemical performance.Precursor anthracite was activated by KOH(KOH:anthracite= 1:1), modified by melamine or urea and then treated at 1173 K to obtain the modified carbons.The porous structure, the chemical composition and the electrochemical characteristics of the carbons were investigated by nitrogen sorption, XPS and electrochemical methods respectively.Electrochemical experiments were performed in an organic electrolytic solution of 1 M(C2H5)4NBF4/PC.The samples modified by the different methods showed differences in chemical composition that introduced varying degrees of electrochemical performance enhancement.The presence of nitrogen enhanced the electron donor properties and the surface wettability of the activated carbons:this ensured a sufficient utilization of the exposed surface for charge storage.

A Novel Surface Aeration Configuration for Improving Gas-Liquid Mass Transfer

A novel surface aeration configuration featured with aself-rotating and floating baffle (SRFB) and a Rushton disk turbine(DT) with a perforated disk has been developed. The SRFB, consistedof 12 fan blades twisted By an angle of 30 deg to the horizontalplane, is incorporated onto the impeller shaft to improve gasentrainment, bubble Breakup, mixing in a φ 154 mm agitated vessel.This new configuration is compared to the conventional DT surfaceAeration experimentally. The results suggest that the criticalimpeller speed for onset of gas entrainment is lower for The newconfiguration and it demands greater power consumption. Moreover, theSRFB system produces 30/100-168/100 Higher volumetric mass transfercoefficient per unit power input than that obtained in theconventional DT surface Aerator under the same operation conditions.

An Unsteady Heterogeneous Mass Transfer Model for Gas Absorption Enhanced by Dispersed Third Phase Droplets

A model for one-dimensional unsteady heterogeneous mass transfer was developed based on Danck-werts' surface renewal theory in order to describe the mass transfer enhancement of absorption process for a slightly soluble gas in a gas-liquid-liquid system.The model accounts for the mass transfer resistance within the dispersed phase and the effect of emulsion viscosity on mass transfer.An analytical solution for enhancement factor was obtained by Laplace domain transformation.The absorption rates of carbon dioxide in the dodecane-in-water and castor oil-in-water systems were measured in a thermostatic reactor,and the enhancement factors were calculated at different volume fractions of dispersed phase and stirrer speeds.The model predictions agree well with the experimental data.

Influence of polarized bias and porous silicon morphology on the electrical behavior of Au-porous silicon contacts

This paper reports the surface morphology and I-V curves of porous silicon （PS） samples and related devices. The observed fabrics on the PS surface were found to affect the electrical property of PS devices. When the devices were operated under different external bias （10 V or 3 V） for 10 min, their observed obvious differences in electrical properties may be due to the different control mechanisms in the A1/PS interface and PS matrix morphology.

A Kinetic Model for Describing the Effect of Proteins on the Air-Water Interface Tension

The main objective of this work was to develop a kinetic model to describe the variation of the surface tension in an air-water interface due to the adsorption of proteins from different origins and to identify quantitatively the relevant parameters, it was considered that the processes of adsorption, unfolding and reordering of the protein molecule in the interface occur simultaneously. The model used in the present work to calculate the surface tension postulates the existence of two simultaneous processes, adsorption and protein rearrangement represented with an equation of first order with two exponential components. The relevant parameter of the equation are ka and kr-the rate constants of the two first order kinetic phases that correspond to both conformational states of the protein, adsorption and rearrangement during the process of variation of the surface tension, and the amplitude parameters Aa and Ar. The results suggest that the kinetic model for the variation of the surface tension of protein solutions proposed in this work, with two simultaneous first order processes, is more appropriate than previous models to describe such variation.

Physicochemical Characterization of Surface Water of the Area of Gafsa

Water exploits an essential part in all the durable development, the exploitation of this natural resource, its management and its position, its mineralization, its underground course and the mode o fits resurgence. The area of Gafsa is known by its very important hydrous potential which is geographically in the zone of transition between central Tunisia and the Saharan platform, these two great fields are separated by the fault of Gafsa which plays an important part in the structuring of the basins of the area, the hydrous resources of Gafsa make subsoil water the principal source of supply water, in the absence of an important network of surface. The zones of studies present requirements out of water which do not cease growing with the progress of the industrial activities and the concentration of the agricultural activities： The objective of this work is to analyze the water of the various zones of the area of Gafsa and to treat it to make it possible most drinkable. The analyzes like measurement of pH, measurement of electric conductivity and measurement of dry residue were made in the laboratory of the chemical group of Mdhila in Tunisia and in laboratory of Ion exchanger Materials of Vitry in France, the processes of treatment as opposite osmosis are also programmed in this same laboratory. The results are very encouraging to start the study and the design of a station of potabilisation of water in the area of Gafsa.

Surface flow constructed wetland with composite plant bed for pretreatment of micro-polluted Yellow River raw water in China

In order to investigate the feasibility of pretreating the micro-polluted Yellow River raw water by constructed wetland, an experiment was conducted using a surface flow constructed wetland with composite plant bed. The contamination removal efficiency and their trends in the wetland treatment system were studied under different hydraulic loading rates(HLR). The contamination removal efficiencies were compared according to the seasonal change under optimum HLR. The result shows that in the same season, under different hydraulic loadings ranging from 2 to 6 m3/(m2·d) at the same period, the best HLR is 4 m3/(m2·d) in the experimental system. The average removal rates of COD, TN, ammoniacal nitrogen(NH4+-N), and TP in the constructed wetland are 38.37%, 45.97%, 39.86% and 41.69%, respectively. According to China Standard for Surface Water Resources (GB3838-2002), mean effluent of COD, TN, NH4+-N and TP can nearly reach Grade Ⅲ, GradeⅤ, GradeⅠand GradeⅠ, respectively. Furthermore, treatment efficiency of the system in summer is obvious higher than that in other seasons. The expenditure of constructing the constructed wetland with the average treating capacity of 176 m3/d and lifetime of 20 years is 17075.00 RMB. The average disposal cost is summed up to 0.17 RMB/m3, which shows that the pretreatment of the micro-polluted Yellow River raw water by constructed wetland is feasible.

Water blocking effect caused by the use of hydraulic methods for permeability enhancement in coal seams and methods for its removal

To research techniques for removing the water blocking effect caused by hydraulic applications in coal seams,the use of surfactants is proposed,based on the mechanics of the water blocking effect.Centrifugal experiments were used to validate the effects of using surfactants;the results show that after dealing with vacuum saturation with water,the volume of micropores decreases,which results in a larger average pore size,and the volume of transitional pores,mesopores,macropores and total pores increases.Based on the distribution of pore size,the operation mode of ‘‘water infusion after gas extraction,then continuing gas extraction" is recommended to improve the volume of coal mine gas drainage.When the reflectance of vitrinite in coal samples is less than 1,using the surfactants Fast T,1631,APG,BS can mitigate the damage caused by the water blocking effect.But when the reflectance of vitrinite is larger than 1.4,the damage caused by the water blocking effect can be increased.When the surfactant CMC is used in hydraulic applications,the capillary forces of coal samples are almost negative,which means the capillary force is in the same direction as the gas extraction.The direction of capillary forces benefits the gas flow.So,using CMC can play an active role in removing the water blocking effect.Centrifugal experiments confirm that using CMC can effectively remove the water blocking effect,which has a beneficial effect on improving the gas drainage volume.

A Method and a Surface Treatment Agent for Preventing Biofouling on Surfaces under Water

This paper presents an environm centally friendly method of inhibiting biofouling especially acorn barnacles on surfaces under water by using nicotine and selenium in the form of Se（0）, or such a substance which can be converted into them. Both of the substances are necessary to oxygen dependent organisms and will be used after conversion, but are toxic in high doses. By adding the substances to paint or other surface treatment agent which marine surfaces are treated with, organisms which are trying to establish themselves on the surfaces will be exposed to so high doses, the reactions which the settling is based on are disturbed. When the substances leak out into the seas, they will act as environment protectors, as they promote the development of organisms. Nicotine is transformed to nicotine amid which is the reactive part in NADH and one of the most important substances for the transference of hydrogen. Selenite is reduced to Se（0）, also involved in the transport chain of hydrogen to reducible oxygen. However, large quantities Se（0） may disturb the reactions of sulphur b＇./binding to it and impairing the formation of S-S-bridges.

Study of Wetting Properties of Carbon Nanofiber Coatings on Various Substrates

The role of roughness and composition on the wetting characteristics of a series of carbon nanofiber based coatings were studied in order to evaluate its superhydrophobic properties. In this study, idealized surfaces were created from a smooth stainless steel and aluminium sheets and two other stainless steel sheets with different textured surfaces. All surfaces were coated with carbon nanofiber alcohol solutions in order to generate coatings of variable compositions using mixtures of isopropanol, water and a commercial carbon nanofibre. The optimum concentration of carbon nanofiber in coatings was obtained to produce superhydrophobic surfaces. A general trend of increasing hydrophobicity was observed for coated surfaces as compared to the bare substrate. Individual contact angles were dependent on the nature of the underlying substrate, relative surface pattern, and roughness. Overall wetting properties were dependent upon composition and micro scale roughness of the coatings.

Development of Heat Transfer Coefficient and Friction Factor Correlations for Serrated Fins in Water Medium using CFD

Abstract： The most popularly used fin types in compact heat exchangers are the serrated fins, wavy fins, louvered fins and plain fins. Amongst these fin types the serrated fins assume lot of importance due to its enhanced thermo-hydraulic performance. Thermo-hydraulic design of CHEs （Compact heat exchangers） is strongly dependent upon the predicted/measured dimensionless performance （Colburnj factor and Fanning friction vs. Reynolds number） of heat transfer surfaces. This paper describes the numerical analysis to study the heat transfer coefficient and friction factor of Serrated fins in water medium. CFD （Computational fluid dynamics） methodology has been used to develop the single phase water heat transfer coefficient and friction factor correlations for serrated fins using ANSYS Fluent 14.5. The results are compared with previous air-cooled models and experimental results of water. The water cooled CFD analysis results shows that the Prandtl number has a large effect on the Nusselt number of the serrated fin geometry. Finally, the generalized correlations are developed for serrated fins taking all geometrical parameters into account. This numerical estimation can reduce the number of tests/experiments to a minimum for similar applications.

STUDY ON SIDE REACTION IN THE SYNTHESIS OF HYPERCROSSLINKED POLYMERS

The systematical study about side reactions have revealed the formation mechanism of oxygen-containing groups of hypercrosslinked polymers. Surface chemistry and functionality of the polymers are characterized by Fourier-transform infrared spectroscopy (FT-IR), solid state nuclear magnetic resonance (NMR) and contact angle. The results showed that the ether groups were from chloromethylated reaction, and the alcohol groups arose from partial hydrolysis of chloromethyl groups during the post-crosslinking reaction, and the carbonyl functionality was formed by further oxidation of the alcohol groups. Catalyst and solvent used in the postcrosslinking reaction would greatly influence the surface chemistry of the polymer.

Solute Transportin Sand Columns as Affected by Effluent Surface Tension

Transport of nonreactive solutes in soils is principally controlled by soil properties, such as particle-size distribution and pore geometry. Surface tension of soil water yields capillary forces that bind the water in the soil pores. Changes in soil water surface tension by contaminants may affect flow of soil water due to decreased capillary forces, caused by lowered soil water surface tension. This study aimed at assessing solute transport in sand columns as affected by effluent surface tension. Miscible displacement （MD） tests were conducted on sand columns repacked with sands sieved from 2.0, 1.0, 0.5 and 0.25 mm screens. The MD tests were conducted with 0.05 M bromide solutions prepared using water with surface tension adjusted to 72.8, 64, 53.5 and 42 dyne/cm2. Obtained breakthrough curves were modeled with the convection-dispersion equation （CDE） model. Coefficient of hydrodynamic dispersion and pore-water velocity responded inconsistently across decreased particle-sizes and water surface tensions and this was attributed to non-uniform effect of lowered effluent surface tension on solute transport in different pore-size distribution.

Developing a 2D vertical flow and sediment transport model for open channels using the Youngs-VOF method

A 2D vertical （2DV） numerical model, without o-coordinate transformation in the vertical direction, is developed for the simulation of flow and sediment transport in open channels. In the model, time-averaged Reynolds equations are closed by the k-e nonlinear turbulence model. The modified Youngs- VOF method is introduced to capture free surface dynamics, and the free surface slope is simulated using the ELVIRA method. Based on the power-law scheme, the k-e model and the suspended-load transport model are solved numerically with an implicit scheme applied in the vertical plane and an explicit scheme applied in the horizontal plane. Bedload transport is modeled using the Euler-WENO scheme, and the grid-closing skill is adopted to deal with the moving channel bed boundary. Verification of the model using laboratory data shows that the model is able to adequately simulate flow and sediment transport in open channels, and is a good starting point for the study of sediment transport dynamics in strong nonlinear flow scenarios.

Surface properties of encapsulating hydrophobic nanoparticles regulate the main phase transition temperature of lipid bilayers： A simulation study

The main phase transition temperature of a lipid membrane, which is vital for its biomedical applications such as controllable drug release, can be regulated by encapsulating hydrophobic nanoparticles into the membrane. However, the exact relationship between surface properties of the encapsulating nanoparticles and the main phase transition temperature of a lipid membrane is far from clear. In the present work we performed coarse-grained molecular dynamics simulations to meet this end. The results show the surface roughness of nanoparticles and the density of surface-modifying molecules on the nanoparticles are responsible for the regulation. Increasing the surface roughness of the nanoparticles increases the main phase transition temperature of the lipid membrane, whereas it can be decreased in a nonlinear way via increasing the density of surface-modifying molecules on the nanoparticles. The results may provide insights for understanding recent experimental studies and promote the applications of nanoparticles in controllable drug release by regulating the main phase transition temperature of lipid vesicles.