The potential of di-(m-Formylphenol)-1,2-cyclohexandiimine as an environmentally friendly corrosion inhibitor for steel was investigated in 1 mol/L HCl using potentiodynamic polarization, electrochemical impedance spe...The potential of di-(m-Formylphenol)-1,2-cyclohexandiimine as an environmentally friendly corrosion inhibitor for steel was investigated in 1 mol/L HCl using potentiodynamic polarization, electrochemical impedance spectroscopy and chronoamperometry measurements. All electrochemical measurements suggest that this compound is an excellent corrosion inhibitor for mild steel and the inhibition efficiency increases with the increase in inhibitor concentration. The effect of temperature on the corrosion behavior of mild steel with the addition of the Schiff base was studied in the temperature range from 25 °C to 65 °C. It is found that the adsorption of this inhibitor follows the Langmuir adsorption isotherms. The value of activation energy and the thermodynamic parameters such as ΔHads, ΔSads, Kads and ΔGads were calculated by the corrosion currents at different temperatures using the adsorption isotherm. The morphology of mild steel surface in the absence and presence of inhibitor was examined by scanning electron microscopy(SEM) images.展开更多
The inhibition of corrosion of steel in molar hydrochloric acid solution by new synthesized DMI （（3-（3,4-dimethoxyphenyl）isoxazole-5-yl） methanol） compound is studied by weight loss and electrochemical polarizat...The inhibition of corrosion of steel in molar hydrochloric acid solution by new synthesized DMI （（3-（3,4-dimethoxyphenyl）isoxazole-5-yl） methanol） compound is studied by weight loss and electrochemical polarization measurements. The two methods give consistent results. The polarization curves indicate that the DMI compound acts as mixed-type inhibitor. This compound is efficient inhibitor. The inhibition efficiency increases with the increase of inhibitor concentration to reach 96% at 10-3 M for DMI. The temperature effect on the corrosion behavior of steel in 1 M HCI with and without the DMI compound at 10-3 M is studied in the temperature range from 298 to 318 K. The adsorption of inhibitor on the steel surface is found to obey the Frumkin adsorption isotherm model. From the adsorption isotherm, some thermodynamic data for the adsorption process （f, K and △Gads） are calculated and discussed.展开更多
文摘The potential of di-(m-Formylphenol)-1,2-cyclohexandiimine as an environmentally friendly corrosion inhibitor for steel was investigated in 1 mol/L HCl using potentiodynamic polarization, electrochemical impedance spectroscopy and chronoamperometry measurements. All electrochemical measurements suggest that this compound is an excellent corrosion inhibitor for mild steel and the inhibition efficiency increases with the increase in inhibitor concentration. The effect of temperature on the corrosion behavior of mild steel with the addition of the Schiff base was studied in the temperature range from 25 °C to 65 °C. It is found that the adsorption of this inhibitor follows the Langmuir adsorption isotherms. The value of activation energy and the thermodynamic parameters such as ΔHads, ΔSads, Kads and ΔGads were calculated by the corrosion currents at different temperatures using the adsorption isotherm. The morphology of mild steel surface in the absence and presence of inhibitor was examined by scanning electron microscopy(SEM) images.
文摘The inhibition of corrosion of steel in molar hydrochloric acid solution by new synthesized DMI （（3-（3,4-dimethoxyphenyl）isoxazole-5-yl） methanol） compound is studied by weight loss and electrochemical polarization measurements. The two methods give consistent results. The polarization curves indicate that the DMI compound acts as mixed-type inhibitor. This compound is efficient inhibitor. The inhibition efficiency increases with the increase of inhibitor concentration to reach 96% at 10-3 M for DMI. The temperature effect on the corrosion behavior of steel in 1 M HCI with and without the DMI compound at 10-3 M is studied in the temperature range from 298 to 318 K. The adsorption of inhibitor on the steel surface is found to obey the Frumkin adsorption isotherm model. From the adsorption isotherm, some thermodynamic data for the adsorption process （f, K and △Gads） are calculated and discussed.
