We demonstrate surface enhanced Raman scattering （SERS） detection of self-assembled nano silver film using a low-cost electrolysis strategy at a proper voltage and silver nitrate concentration in electrolyte. The co...We demonstrate surface enhanced Raman scattering （SERS） detection of self-assembled nano silver film using a low-cost electrolysis strategy at a proper voltage and silver nitrate concentration in electrolyte. The concentration dependence of SERS from crystal violet （CV） molecules adsorbed to silver film was systematically studied. Importantly, the SERS surface enhancement factor of such nano silver film was 603, which was measured by a portable Raman spectrometer. The minimum concentration of detectable CV molecules can be as low as 10^-11 mol/L. The nano silver film prepared by this electrolysis method is an active, stable, cost-effective, and reusable SERS substrate.展开更多
The haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy was studied after surface heparinization. A layer of sol-gel TiO2 films was applied on the alloy samples followed by active treatment in the bio-functiona...The haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy was studied after surface heparinization. A layer of sol-gel TiO2 films was applied on the alloy samples followed by active treatment in the bio-functionalized solution for introducing the OH- and groups, and then the heparin was immobilized on the active TiO2 films through the electrostatic self assembly technology. It is shown that the heparinized films are mainly composed of anatase and rutile with smooth and dense surface. In vitro blood compatibility was evaluated by haemolysis test, clotting time and platelet adhesion behavior tests. The results show that the haemocompatibility of the alloy could be significantly improved by surface heparinization.展开更多
Linkers were assembled on a glass surface based on the hydrolysis and condensation of 3-glycidoxy￣propyltrimethoxysilane (GPS). After the assembly of GPS, four approaches were tried to open the ending epoxide group o...Linkers were assembled on a glass surface based on the hydrolysis and condensation of 3-glycidoxy￣propyltrimethoxysilane (GPS). After the assembly of GPS, four approaches were tried to open the ending epoxide group of GPS or to further elongate the linkers. The effect of these approaches on DNA in situ synthesis and hybridization was investigated. For the spacing of the synthesis initiation sites, the wettability of the support and the length of the linking group that attaches the initiation site to the surface have direct influences on the yield of coupling reactions and the subsequent hybridization events. X-ray photoelectron spectroscopy (XPS) and mean contact angles of deionized water of the above slides were measured to assess the linker's characteristics in each procedure. It was proved that the glass slides were successfully modified and became excellent supports for the oligonucleotides synthesis. In addition, it proved best for the in situ oligonucleotides synthesis that a glass slide was in turn treated with ethylenediamine, glutaradehyde, ethanolamine and sodium borohydride solution at ambient temperature after silanized with GPS.展开更多
The structural and electronic properties of bulk and (001) plane of TiC were investigated by the first-principles total-energy pseudopotential method based on density functional theory.The calculated bulk properties i...The structural and electronic properties of bulk and (001) plane of TiC were investigated by the first-principles total-energy pseudopotential method based on density functional theory.The calculated bulk properties indicate that bonding nature in TiC is a combination of ionicity,covalency and metallicity,in which the Ti-C covalent bonding is the predominate one.The calculated results of structural relaxation and surface energy for TiC(001) slab indicate that slab with 7 layers shows bulk-like characteristic interiors,and the changes of slab occur on the outmost three layers,which shows that the relaxation only influences the top three layers.Meanwhile,the strong Ti-C covalent bonding can be found in the distribution of charge density on the (110) and (001) planes.Ti-C covalent bonding is enhanced by the charge depletion and accumulation in the vacuum and the interlayer region between top two atomic layers.展开更多
A kind of modifier was synthesized to modify the surface of nanometer calcium carbonate （abbreviated as nano-CaCO3）, which is used in architectural coatings. The modification technology of the nano-CaCO3 was studied...A kind of modifier was synthesized to modify the surface of nanometer calcium carbonate （abbreviated as nano-CaCO3）, which is used in architectural coatings. The modification technology of the nano-CaCO3 was studied through orthogonal experimental methods. The factors studied were rotation speed, modifier dosage, emulsification temperature, emulsification time and heat aging time after emulsification. Optimized conditions for modification of the surface were： rotation speed 16000 r/min; modifier dosage 3%; emulsification temperature 75 ℃; emulsification time 60 min and aging time 40 min. The modified nano-CaCO3 was also studied by size-distribution measurements, transmission electron microscopy, infrared spectroscopy and thermal analysis. The results show that the size distribution of the modified nano-CaCO3 is uniform and that there are chemi-sorption and physi-sorption between the nano-CaCO3 and the modifier. Compared to traditional architectural coatings without nano-CaCO3, the nanometer composite coatings are obviously improved in respect to dirt resistance, scrub resistance, thixotropy, water resistance, alkalinity resistance and aging resistance.展开更多
基金ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.10864001）, the Natural Science Foundation of Yunnan Province （No.2008ZC159M）, and No.8 Middle-Aged and Young Academic Talent Reserve Project of Yunnan Province （No.2005PY01-51）.
文摘We demonstrate surface enhanced Raman scattering （SERS） detection of self-assembled nano silver film using a low-cost electrolysis strategy at a proper voltage and silver nitrate concentration in electrolyte. The concentration dependence of SERS from crystal violet （CV） molecules adsorbed to silver film was systematically studied. Importantly, the SERS surface enhancement factor of such nano silver film was 603, which was measured by a portable Raman spectrometer. The minimum concentration of detectable CV molecules can be as low as 10^-11 mol/L. The nano silver film prepared by this electrolysis method is an active, stable, cost-effective, and reusable SERS substrate.
基金Project (31100693/C100302) supported by the National Natural Science Foundation of ChinaProject (31011120049) supported by the Australia-China Special Fund, International Science Linkages Program co-supported by the Department of Innovation, Industry, Science and Research of Australia, and the Ministry of Science and Technology and National Science Foundation of China+1 种基金Project(2010ZDKG-96) supported by the Major Subject of "13115" Programs of Shaan’xi Province, ChinaProject (2012CB619102) supported by the National Basic Research Program of China
文摘The haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy was studied after surface heparinization. A layer of sol-gel TiO2 films was applied on the alloy samples followed by active treatment in the bio-functionalized solution for introducing the OH- and groups, and then the heparin was immobilized on the active TiO2 films through the electrostatic self assembly technology. It is shown that the heparinized films are mainly composed of anatase and rutile with smooth and dense surface. In vitro blood compatibility was evaluated by haemolysis test, clotting time and platelet adhesion behavior tests. The results show that the haemocompatibility of the alloy could be significantly improved by surface heparinization.
文摘Linkers were assembled on a glass surface based on the hydrolysis and condensation of 3-glycidoxy￣propyltrimethoxysilane (GPS). After the assembly of GPS, four approaches were tried to open the ending epoxide group of GPS or to further elongate the linkers. The effect of these approaches on DNA in situ synthesis and hybridization was investigated. For the spacing of the synthesis initiation sites, the wettability of the support and the length of the linking group that attaches the initiation site to the surface have direct influences on the yield of coupling reactions and the subsequent hybridization events. X-ray photoelectron spectroscopy (XPS) and mean contact angles of deionized water of the above slides were measured to assess the linker's characteristics in each procedure. It was proved that the glass slides were successfully modified and became excellent supports for the oligonucleotides synthesis. In addition, it proved best for the in situ oligonucleotides synthesis that a glass slide was in turn treated with ethylenediamine, glutaradehyde, ethanolamine and sodium borohydride solution at ambient temperature after silanized with GPS.
基金Project(200802015) supported by Post-doctoral Foundation of Shandong Province,ChinaProject(50625101) supported by the National Natural Science Foundation for Distinguished Young Scholars of China
文摘The structural and electronic properties of bulk and (001) plane of TiC were investigated by the first-principles total-energy pseudopotential method based on density functional theory.The calculated bulk properties indicate that bonding nature in TiC is a combination of ionicity,covalency and metallicity,in which the Ti-C covalent bonding is the predominate one.The calculated results of structural relaxation and surface energy for TiC(001) slab indicate that slab with 7 layers shows bulk-like characteristic interiors,and the changes of slab occur on the outmost three layers,which shows that the relaxation only influences the top three layers.Meanwhile,the strong Ti-C covalent bonding can be found in the distribution of charge density on the (110) and (001) planes.Ti-C covalent bonding is enhanced by the charge depletion and accumulation in the vacuum and the interlayer region between top two atomic layers.
文摘A kind of modifier was synthesized to modify the surface of nanometer calcium carbonate （abbreviated as nano-CaCO3）, which is used in architectural coatings. The modification technology of the nano-CaCO3 was studied through orthogonal experimental methods. The factors studied were rotation speed, modifier dosage, emulsification temperature, emulsification time and heat aging time after emulsification. Optimized conditions for modification of the surface were： rotation speed 16000 r/min; modifier dosage 3%; emulsification temperature 75 ℃; emulsification time 60 min and aging time 40 min. The modified nano-CaCO3 was also studied by size-distribution measurements, transmission electron microscopy, infrared spectroscopy and thermal analysis. The results show that the size distribution of the modified nano-CaCO3 is uniform and that there are chemi-sorption and physi-sorption between the nano-CaCO3 and the modifier. Compared to traditional architectural coatings without nano-CaCO3, the nanometer composite coatings are obviously improved in respect to dirt resistance, scrub resistance, thixotropy, water resistance, alkalinity resistance and aging resistance.
