期刊文献+
共找到17篇文章
< 1 >
每页显示 20 50 100
小型线切割机床装丝支撑架的设计与研究
1
作者 赵夫超 杨坤 +2 位作者 吴福贵 毕忠良 许金煌 《机械工程师》 2022年第12期90-91,94,共3页
线切割机床广泛应用于模具等精密零部件的生产中。文中分析了一种小型线切割机床现用的装丝方式存在的使用弊端,并对装丝原理进行分析,从而设计了一种使用方便的新型装丝机构,重点阐述了其结构、原理和使用方法。
关键词 线切割机床 装丝 支撑架
下载PDF
低碳钢丝退火用装丝罐的渗铝技术
2
作者 常家初 孟毅华 《金属制品》 1995年第4期41-42,共2页
低碳钢丝温火用装丝罐一般采用普通低碳钢板焊成,使用寿命仅3~6个月.文章介绍将渗铝技术应用到装丝缺罐上,经渗铝处理后,其使用寿命提高了数倍.
关键词 低碳钢 退火 装丝 渗铝
下载PDF
张力对粘胶筒装丝成型质量的影响
3
作者 李星华 《人造纤维》 2009年第1期15-16,共2页
粘胶丝筒装丝成型是否良好主要是由丝条所受张力决定的,在络筒过程中只有保持各丝层之间的张力值适宜且均匀,才能保证丝筒成型良好。本文根据生产实践分析了张力对筒装丝成型质量的影响。
关键词 装丝成型 影响因素 张力 张力值
下载PDF
“白金马”粘胶长丝饼装丝的开发和应用
4
作者 牛经敏 夏郁葱 《人造纤维》 2010年第1期7-9,共3页
介绍了吉林化纤股份公司与日本可乐丽公司合作开发的"白金马"粘胶长丝饼装丝的开发过程、用户使用过程跟踪和日本用户分层使用方法。"白金马"粘胶长丝饼装丝在日本粘胶长丝市场占有率达到50%以上。
关键词 粘胶长 装丝 开发和应用 日本用户
下载PDF
嵌银丝端燃装药耦合传热的内弹道数值分析 被引量:8
5
作者 肖志平 韩波 +2 位作者 张亮 职世君 邢国强 《固体火箭技术》 EI CAS CSCD 北大核心 2016年第2期188-193,共6页
针对内埋金属丝端燃装药燃烧过程中出现压强峰值的问题,耦合金属丝区域的传热过程,建立了内埋金属丝端燃装药燃速计算模型。通过对有限元软件,进行二次开发实现了内埋金属丝装药传热及燃面退移过程的模拟。结果显示,沿金属丝被加热推进... 针对内埋金属丝端燃装药燃烧过程中出现压强峰值的问题,耦合金属丝区域的传热过程,建立了内埋金属丝端燃装药燃速计算模型。通过对有限元软件,进行二次开发实现了内埋金属丝装药传热及燃面退移过程的模拟。结果显示,沿金属丝被加热推进剂的温度、燃速、增速比受燃烧室压强影响较大。在此基础上,进行了嵌单根银丝端燃装药内弹道仿真,得到了压强,燃面面积,沿金属丝燃速随时间变化规律。结果表明,计算模型可有效模拟内埋金属丝端燃装药燃烧过程,与实验数据吻合较好,从理论上解释了燃烧过程中出现压强峰值的实验现象。 展开更多
关键词 嵌金属 二次开发 内弹道 传热 燃速
下载PDF
如何使用好饼装人造丝
6
作者 崔勤增 王文霞 《河北纺织》 1990年第5期32-33,37,共3页
关键词 装丝 人造 使用 织造
下载PDF
筒装桑蚕经纬捻线丝外观抽样方案探讨
7
作者 胡巍 《现代商检科技》 1999年第3期26-29,共4页
关键词 桑蚕经纬捻线 装丝 外观检验 抽样方案
下载PDF
大鹏湾畔一新星——奋进中的深圳迪丝平时装有限公司
8
作者 邹奉辛 《科技经济市场》 2000年第8期44-45,共2页
"蛇借长风,可成天龙",借科技之"长风",而创立服装名牌"迪丝平"的深圳迪丝平时装有限公司的员工们,并没有停下自己奋进的脚步。
关键词 深圳迪平时有限公司 销售网络 企业文化建设 品牌形象
下载PDF
GD-SW-2004系列丝线数控成绞机 被引量:1
9
作者 宋礽苏 王征 陈金娥 《国外丝绸》 2005年第4期10-13,共4页
丝线成绞机是一种将筒装捻线丝卷绕成预定长度的绞装丝片的机器,是制线、丝绸、化纤等行业进行绞装丝线出口或色丝加工的重要设备,并开始扩大到棉纺和毛纺领域。文章介绍了最新研制的GD-SW-2004系列丝线数控成绞机的工作原理和性能特点... 丝线成绞机是一种将筒装捻线丝卷绕成预定长度的绞装丝片的机器,是制线、丝绸、化纤等行业进行绞装丝线出口或色丝加工的重要设备,并开始扩大到棉纺和毛纺领域。文章介绍了最新研制的GD-SW-2004系列丝线数控成绞机的工作原理和性能特点,并通过与原6型机比较,阐述了机器的新特点。 展开更多
关键词 GD-SW-2004系列线数控成绞机 装丝 工作原理 纺纱机 步进电机
下载PDF
GD-SW-2008型数控丝线成绞机
10
作者 宋礽苏 王征 陈金娥 《丝绸》 CAS 北大核心 2009年第11期29-31,34,共4页
GD—SW—2008型数控丝线成绞机是一种将筒装丝或精细纱线卷绕成预定长度的绞装丝片的机器,尤其适应有高质量工艺要求的绞装捻丝线出口生产。文章介绍了双面式与单面式机型的主要区别和相同点,并从丝长控制精确、工艺适应性强,成绞质量... GD—SW—2008型数控丝线成绞机是一种将筒装丝或精细纱线卷绕成预定长度的绞装丝片的机器,尤其适应有高质量工艺要求的绞装捻丝线出口生产。文章介绍了双面式与单面式机型的主要区别和相同点,并从丝长控制精确、工艺适应性强,成绞质量好、成绞工效高、性能/价格比高、改善操作工劳动条件、零部件使用寿命长、安全性能好、安装调节方便、保养修理简单、机器制造效率高成本低等11个主要性能的介绍,阐述了机器的新特点。文章配有性能参数表,详细说明了数控仪定长预置和试样操作的方法。 展开更多
关键词 数控线成绞机 制线 捻线
下载PDF
意大利斯尼亚FCT3000粘胶连续纺丝机
11
作者 陈曼莲 《广西化纤通讯》 1993年第2期43-45,共3页
关键词 连续纺 无捻筒装丝
下载PDF
Facile preparation of nanocrystal-assembled hierarchical mordenite zeolites with remarkable catalytic performance 被引量:9
12
作者 袁扬扬 王林英 +4 位作者 刘红超 田鹏 杨淼 徐舒涛 刘中民 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 北大核心 2015年第11期1910-1919,共10页
The present study reports a novel strategy to fabricate nanocrystal-assembled hierarchical MOR zeolites. This is the first demonstration of hierarchical MOR without preferential growth along the c-axis, which facilita... The present study reports a novel strategy to fabricate nanocrystal-assembled hierarchical MOR zeolites. This is the first demonstration of hierarchical MOR without preferential growth along the c-axis, which facilitates mass transfer in the 12-membered ring channels of MOR zeolite for the conversions involving bulky molecules. The facile method involves the combined use of tetraethylammonium hydroxide (TEAOH) and commercial surfactants, in which TEAOH is essential for the construction of nanocrystal assemblies. The surfactant serves as a crystal growth-inhibiting agent to further inhibit nanocrystalline particle growth, resulting in enhanced mesoporosity. The hierarchical MOR assembled particles, constructed of 20-50-nm crystallites, exhibit superior catalytic properties in the alkylation of benzene with benzyl alcohol compared with the control sample, as the hierarchical MOR possesses a larger external surface area and longer c-axis dimension. More importantly, the material shows improved activity and stability in the dimethyl ether carbonylation to methyl acetate reaction, which is a novel route to produce ethanol from syngas. 展开更多
关键词 Nanocrystal-assembled Mordenite Tetraethylammonium hydroxide Surfactant Catalytic activity
下载PDF
活性污泥法泡沫产生的原因与控制措施
13
作者 张晓燕 王龙 李应波 《化工安全与环境》 2017年第22期21-22,共2页
活性污泥法处理废水是一项错综复杂的过程,在运行过程中经常受泡沫问题的影响,导致处理效果的降低以及运行费用的提高。大量研究表明,污泥中某些丝状菌或放线菌的过度增殖是造成活性污泥工艺中泡沫问题的主要原因。主要讨论了泡沫的... 活性污泥法处理废水是一项错综复杂的过程,在运行过程中经常受泡沫问题的影响,导致处理效果的降低以及运行费用的提高。大量研究表明,污泥中某些丝状菌或放线菌的过度增殖是造成活性污泥工艺中泡沫问题的主要原因。主要讨论了泡沫的产生原因,已知的发泡微生物的种类,并对污泥消化过程中的泡沫问题作了简单的介绍. 展开更多
关键词 活性污泥 泡沫
下载PDF
MPF Induction of Microtubule Assembly at Interphase Kinetochore of CHO Cells
14
作者 冯梅 张焕相 +1 位作者 王永潮 王跃 《Developmental and Reproductive Biology》 1994年第1期10-16,T001-T003,共10页
Properties of the interphase microtubule organizing centers (MTOCs) of CHO cells were investigated using indirect immunofluorescence staining technique.Microtubule proteins were isolated from swine brain by three cyc... Properties of the interphase microtubule organizing centers (MTOCs) of CHO cells were investigated using indirect immunofluorescence staining technique.Microtubule proteins were isolated from swine brain by three cycles of assembly-disassembly- 6S tubulin was purified by chromatograph y through cellulose phosphate p-11 column. Rabbits were immunized with the purified 6S tubulin and the anti-6S tubulin antiserum thus prepared was used in the indirect immunofluorescence staining of nuclei With double thymidine block method, we obtained cells at G1/S, S and G2 phases of cell cycle and isolated nuclei from cells of each pltase, Immunofluorescence staining of MTOCs could hardly he detected in the Triton X-100 treated cells nor in nuclei of any phase after preincubation with purified 6S tubulin alone. Yet,if the Triton X-100 treated cells or nuclei were incubated, in the presence of 5 mM ATP, with maturation promoting factor (MPF)isolated from mature oocytes of Xenopus for 40 minutes before the addition of the 6S tubulin, specifically stained MTOCs were clearly demonstrated in S and G2 nuclei Furthermore, microbubules could be observed radiating from the MTOCs in late S and G2 nuclei. However, alkaline pHospHatase treatment of the nuclei which had been incubated with the activated MPF prohibited the staining of MTOCs, and MPF isolated from premature oocytes failed to contribute to the immunostaining of MTOCs. Our results thus suggest that the transformation of kinetochores into MTOCs during cell cycle requires activated MPF and phosphorylation of proteins. 展开更多
关键词 KINETOCHORE Microbubule assembly MPF MTOCs
下载PDF
Measurement and Simulation of Energy Consumption of Feed Drive Systems
15
作者 Akio Hayashi Ryoma Iwase Ryuta Sato Keiichi Shirase 《Journal of Mechanics Engineering and Automation》 2014年第3期203-212,共10页
In this study, in order to investigate the power consumption of feed drive system, mathematical models for the single-axis experimental apparatus are developed. This apparatus can be driven by either of ball screw or ... In this study, in order to investigate the power consumption of feed drive system, mathematical models for the single-axis experimental apparatus are developed. This apparatus can be driven by either of ball screw or linear motor and it is possible to change the mechanical properties of such as grease viscosity of the table. Then, the power consumption is simulated by proposed method based on the mathematical model of feed drive systems and the simulated results are compared with the measured results of the experimental apparatus to confirm the validity of the proposed method. In addition, it is clarified that the energy usages of the feed drive system. The energy losses of the feed drive system are divided into the loss of each part and these energy losses are calculated by the proposed method. Then, it is investigated that the influence of the velocity and friction to the energy consumption of feed drive system. As the results, it is confirmed that proposed method can accurately predict the power consumption of the ball-screw feed drive system. It is also clarified that the energy usage for both of ball-screw and linear motor drive systems. 展开更多
关键词 Energy consumption feed drive system mathematical model ball screw linear motor.
下载PDF
Assembly and disassembly of mammalian chromosome pellicle
16
作者 NIZUMEI JELITTLE 《Cell Research》 SCIE CAS CSCD 1992年第2期195-201,共7页
By means of indirect double immunofluorescent staining, the coordination of PI antigen and perichromonucleolin (PCN), the constituent of nuclear periphery and nucleolus respectively, in the assembly and disassembly of... By means of indirect double immunofluorescent staining, the coordination of PI antigen and perichromonucleolin (PCN), the constituent of nuclear periphery and nucleolus respectively, in the assembly and disassembly of chromosome pellicle during mitosis was studied. It was found that in 3T3 cells, during mitosis PI antigen began to coat the condensing chromosome .surface earlier.than PCN did. However, both of them completed their coating on chromosome at approximately the same stage of mitosis, prometaphase metaphase. The dissociation of PI antigen from chromosome pellicle to participate the formation of nuclear periphery took, place also ahead of that of PCN. At early telophase PI antigen had been extensively involved in the formation of nuclear periphery, while PCN remained in association with the surface of decondensing chromosomes. At late telophase, when PI antigen was localized in an fairly well formed nuclear periphery, PCN was in a stage of forming prenucleolar bodies. 展开更多
关键词 chromosome pellicle ASSEMBLY DISASSEMBLY PI antigen perichrmnonucleolin (PCN) indirect double imnuinofluorescenl staining mitosis.
下载PDF
Laser Device for the Protection of Biological Objects from the Damaging Action of Ionizing Radiation 被引量:3
17
作者 Karine Voskanyan Svetlana Vorozhtsova +2 位作者 Alia Abrosimova Gennady Mitsyn Victor Gaevsky 《Journal of Physical Science and Application》 2012年第6期152-157,共6页
Laser irradiation device for the protection of biological objects from the action of ionizing radiation to be used in practice has been manufactured (invention patent RU 2 428 228 C2). Research of the action of y-ra... Laser irradiation device for the protection of biological objects from the action of ionizing radiation to be used in practice has been manufactured (invention patent RU 2 428 228 C2). Research of the action of y-radiation itself as well as of the combined action of laser devices on survival, weight, skin and the general mitotic index of the bone marrow cells (mitotic index of all nucleus-containing cells of the bone marrow) of C57BL/6 experimental young mice was carried out. The mice were irradiated with ionizing (whole body irradiation) and laser radiation, separately one by one in a special frame device. Laser radiation in the dose 1 mJ/cm^2 irradiated only the back of a mouse, or both the back and the abdomen of mice. In case of combined irradiation of mice, the time interval between two types of irradiation did not exceed 30 min. First, the mice were exposed to y-radiation then to laser radiation. The method of the laser radiation-protection of biological subjects contributes to an increase in the viability of mice, prevents the damages of skin and also increases the mitotic activity of mice bone marrow cells. 展开更多
关键词 Radiation protection laser radiation mitotic activity of bone marrow cells.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部