A plastic mixture construction technology using MBER （material becoming earth into rock） soil stabilizer is introduced and the water quality of a solidified soil cistern using the technology is analyzed. Rainwater w...A plastic mixture construction technology using MBER （material becoming earth into rock） soil stabilizer is introduced and the water quality of a solidified soil cistern using the technology is analyzed. Rainwater was harvested in July, 2012. Water quality of runoff and cistern water after storage was measured, including turbidity, chemical oxygen demand （COD）, total nitrogen, nitrate, and ammonia. Results show that pollutant concentrations in runoff decreased with time, indicating that runoff in the early time should be removed. Nitrate concentrations in cistern water increased after storage, while the remaining parameters decreased. Measured pollutant concentrations did not exceed the limit according to the standard for drinking water in China. It can be concluded that the solidified soil cistern with plastic mixture construction technology can provide available water for domestic use.展开更多
Pt based materials are the most efficient electrocatalysts for the oxygen reduction reaction(ORR)and methanol oxidation reaction(MOR)in fuel cells.Maximizing the utilization of Pt based materials by modulating their m...Pt based materials are the most efficient electrocatalysts for the oxygen reduction reaction(ORR)and methanol oxidation reaction(MOR)in fuel cells.Maximizing the utilization of Pt based materials by modulating their morphologies to expose more active sites is a fundamental objective for the practical application of fuel cells.Herein,we report a new class of hierarchically skeletal Pt-Ni nanocrystals(HSNs)with a multi-layered structure,prepared by an inorganic acid-induced solvothermal method.The addition of H_(2)SO_(4)to the synthetic protocol provides a critical trigger for the successful growth of Pt-Ni nanocrystals with the desired structure.The Pt-Ni HSNs synthesized by this method exhibit enhanced mass activity of 1.25 A mgpt−1 at 0.9 V(versus the reversible hydrogen electrode)towards ORR in 0.1-M HClO_(4),which is superior to that of Pt-Ni multi-branched nanocrystals obtained by the same method in the absence of inorganic acid;it is additionally 8.9-fold higher than that of the commercial Pt/C catalyst.Meanwhile,it displays enhanced stability,with only 21.6%mass activity loss after 10,000 cycles(0.6–1.0 V)for ORR.Furthermore,the Pt-Ni HSNs show enhanced activity and anti-toxic ability in CO for MOR.The superb activity of the Pt-Ni HSNs for ORR and MOR is fully attributed to an extensively exposed electrochemical surface area and high intrinsic activity,induced by strain effects,provided by the unique hierarchically skeletal alloy structure.The novel open and hierarchical structure of Pt-Ni alloy provides a promising approach for significant improvements of the activity of Pt based alloy electrocatalysts.展开更多
A series of Co-imbedded zeolite-based catalysts were synthesized following a facile solvent-free grinding route.The catalytic performance for direct syngas conversion to gasoline range hydrocarbons was compared with t...A series of Co-imbedded zeolite-based catalysts were synthesized following a facile solvent-free grinding route.The catalytic performance for direct syngas conversion to gasoline range hydrocarbons was compared with their counterpart Co-impregnated zeolite-based catalysts.Successful transformation of solid raw materials to targeted zeolite was confirmed by XRD,SEM,STEM,and N2 physisorption analysis.An in-depth study of acidic strength and acidic site distribution was conducted by NH3-TPD and Py-IR spectroscopy.Acidic strength showed a pivotal role in defining product range.Co@S1,with the weakest acidic strength of silicalite-1 among three types of zeolites,evaded over-cracking of product and exhibited the highest gasoline and isoparaffin selectivity(≈70%and 30.7%,respectively).Moreover,the solvent-free raw material grinding route for zeolite synthesis accompanies several advantages like the elimination of production of wastewater,high product yield within confined crystallization space,and elimination of safety concerns regarding high pressure due to the absence of the solvent.Facileness and easiness of the solvent-free synthesis route together with promising catalytic performance strongly support its application on the industrial scale.展开更多
This article is based on the experimental data on reaction of FCC naphtha in the presence of acid catalysts. The data published in the literature were reprocessed and compared with experimental data and the relationsh...This article is based on the experimental data on reaction of FCC naphtha in the presence of acid catalysts. The data published in the literature were reprocessed and compared with experimental data and the relationship of hydrogen and methane contained in the dry gas with the conversion rate was identified.The similarity between the route for cracking of olefin enriched FCC gasoline and the route for reaction of individual hydrocarbons was deduced, while the route for formation of ethylene in dry gas was also proposed to identify the relationship between the reaction path for formation of ethylene and the conversion rate.展开更多
A kind of modifier was synthesized to modify the surface of nanometer calcium carbonate （abbreviated as nano-CaCO3）, which is used in architectural coatings. The modification technology of the nano-CaCO3 was studied...A kind of modifier was synthesized to modify the surface of nanometer calcium carbonate （abbreviated as nano-CaCO3）, which is used in architectural coatings. The modification technology of the nano-CaCO3 was studied through orthogonal experimental methods. The factors studied were rotation speed, modifier dosage, emulsification temperature, emulsification time and heat aging time after emulsification. Optimized conditions for modification of the surface were： rotation speed 16000 r/min; modifier dosage 3%; emulsification temperature 75 ℃; emulsification time 60 min and aging time 40 min. The modified nano-CaCO3 was also studied by size-distribution measurements, transmission electron microscopy, infrared spectroscopy and thermal analysis. The results show that the size distribution of the modified nano-CaCO3 is uniform and that there are chemi-sorption and physi-sorption between the nano-CaCO3 and the modifier. Compared to traditional architectural coatings without nano-CaCO3, the nanometer composite coatings are obviously improved in respect to dirt resistance, scrub resistance, thixotropy, water resistance, alkalinity resistance and aging resistance.展开更多
Isolated cationic Pd species encapsulated in MFI zeolite,i.e.,Pd@MFI,have been successfully prepared via in situ hydrothermal route followed by oxidative treatment.The as-prepared Pd@MFI samples are investigated as pr...Isolated cationic Pd species encapsulated in MFI zeolite,i.e.,Pd@MFI,have been successfully prepared via in situ hydrothermal route followed by oxidative treatment.The as-prepared Pd@MFI samples are investigated as promising catalysts in the reaction of methane combustion.Typically,Pd@H-ZSM-5 shows remarkable activity in methane catalytic combustion with a low apparent activation energy value of 70.7 kj/mol as well as good catalytic stability even in excess water vapor.Detailed characterization results demonstrate the strong interaction between Pd sites and zeolite framework in Pd@ZSM-5 and the efficient stabilization of isolated Pd sites by zeolite thereof.Spectroscopy analyses reveal that the presence of BrΦnsted acid sites is beneficial to methane adsorption and its subsequent activation on adjacent Pd sites,constructing cooperation between Bronsted acid sites and Pd sites within the confined space of MFI zeolite toward high-efficiency methane catalytic combustion.The reaction mechanism of methane combustion catalyzed by Pd@H-ZSM-5 model catalyst is finally discussed.展开更多
基金The National Key Technology R&D Program of China during the 12th Five Year Plan Period(No.2011BAD31B05)the National Natural Science Foundation of China(No.41371276)+1 种基金the National Science and Technology Major Project of China(No.2009ZX07212-002-003-02)the Knowledge Innovation Project of theInstitute of Soil and Water Conservation,CAS&MWR(No.A315021304)
文摘A plastic mixture construction technology using MBER （material becoming earth into rock） soil stabilizer is introduced and the water quality of a solidified soil cistern using the technology is analyzed. Rainwater was harvested in July, 2012. Water quality of runoff and cistern water after storage was measured, including turbidity, chemical oxygen demand （COD）, total nitrogen, nitrate, and ammonia. Results show that pollutant concentrations in runoff decreased with time, indicating that runoff in the early time should be removed. Nitrate concentrations in cistern water increased after storage, while the remaining parameters decreased. Measured pollutant concentrations did not exceed the limit according to the standard for drinking water in China. It can be concluded that the solidified soil cistern with plastic mixture construction technology can provide available water for domestic use.
文摘Pt based materials are the most efficient electrocatalysts for the oxygen reduction reaction(ORR)and methanol oxidation reaction(MOR)in fuel cells.Maximizing the utilization of Pt based materials by modulating their morphologies to expose more active sites is a fundamental objective for the practical application of fuel cells.Herein,we report a new class of hierarchically skeletal Pt-Ni nanocrystals(HSNs)with a multi-layered structure,prepared by an inorganic acid-induced solvothermal method.The addition of H_(2)SO_(4)to the synthetic protocol provides a critical trigger for the successful growth of Pt-Ni nanocrystals with the desired structure.The Pt-Ni HSNs synthesized by this method exhibit enhanced mass activity of 1.25 A mgpt−1 at 0.9 V(versus the reversible hydrogen electrode)towards ORR in 0.1-M HClO_(4),which is superior to that of Pt-Ni multi-branched nanocrystals obtained by the same method in the absence of inorganic acid;it is additionally 8.9-fold higher than that of the commercial Pt/C catalyst.Meanwhile,it displays enhanced stability,with only 21.6%mass activity loss after 10,000 cycles(0.6–1.0 V)for ORR.Furthermore,the Pt-Ni HSNs show enhanced activity and anti-toxic ability in CO for MOR.The superb activity of the Pt-Ni HSNs for ORR and MOR is fully attributed to an extensively exposed electrochemical surface area and high intrinsic activity,induced by strain effects,provided by the unique hierarchically skeletal alloy structure.The novel open and hierarchical structure of Pt-Ni alloy provides a promising approach for significant improvements of the activity of Pt based alloy electrocatalysts.
基金the financial support from the Zhejiang Province Natural Science Foundation(LY19B060001)the Foundation of State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering(2018-K25)the Foundation of Zhejiang University of Science and Technology(2019QN18,2019QN23)~~
文摘A series of Co-imbedded zeolite-based catalysts were synthesized following a facile solvent-free grinding route.The catalytic performance for direct syngas conversion to gasoline range hydrocarbons was compared with their counterpart Co-impregnated zeolite-based catalysts.Successful transformation of solid raw materials to targeted zeolite was confirmed by XRD,SEM,STEM,and N2 physisorption analysis.An in-depth study of acidic strength and acidic site distribution was conducted by NH3-TPD and Py-IR spectroscopy.Acidic strength showed a pivotal role in defining product range.Co@S1,with the weakest acidic strength of silicalite-1 among three types of zeolites,evaded over-cracking of product and exhibited the highest gasoline and isoparaffin selectivity(≈70%and 30.7%,respectively).Moreover,the solvent-free raw material grinding route for zeolite synthesis accompanies several advantages like the elimination of production of wastewater,high product yield within confined crystallization space,and elimination of safety concerns regarding high pressure due to the absence of the solvent.Facileness and easiness of the solvent-free synthesis route together with promising catalytic performance strongly support its application on the industrial scale.
文摘This article is based on the experimental data on reaction of FCC naphtha in the presence of acid catalysts. The data published in the literature were reprocessed and compared with experimental data and the relationship of hydrogen and methane contained in the dry gas with the conversion rate was identified.The similarity between the route for cracking of olefin enriched FCC gasoline and the route for reaction of individual hydrocarbons was deduced, while the route for formation of ethylene in dry gas was also proposed to identify the relationship between the reaction path for formation of ethylene and the conversion rate.
文摘A kind of modifier was synthesized to modify the surface of nanometer calcium carbonate （abbreviated as nano-CaCO3）, which is used in architectural coatings. The modification technology of the nano-CaCO3 was studied through orthogonal experimental methods. The factors studied were rotation speed, modifier dosage, emulsification temperature, emulsification time and heat aging time after emulsification. Optimized conditions for modification of the surface were： rotation speed 16000 r/min; modifier dosage 3%; emulsification temperature 75 ℃; emulsification time 60 min and aging time 40 min. The modified nano-CaCO3 was also studied by size-distribution measurements, transmission electron microscopy, infrared spectroscopy and thermal analysis. The results show that the size distribution of the modified nano-CaCO3 is uniform and that there are chemi-sorption and physi-sorption between the nano-CaCO3 and the modifier. Compared to traditional architectural coatings without nano-CaCO3, the nanometer composite coatings are obviously improved in respect to dirt resistance, scrub resistance, thixotropy, water resistance, alkalinity resistance and aging resistance.
文摘Isolated cationic Pd species encapsulated in MFI zeolite,i.e.,Pd@MFI,have been successfully prepared via in situ hydrothermal route followed by oxidative treatment.The as-prepared Pd@MFI samples are investigated as promising catalysts in the reaction of methane combustion.Typically,Pd@H-ZSM-5 shows remarkable activity in methane catalytic combustion with a low apparent activation energy value of 70.7 kj/mol as well as good catalytic stability even in excess water vapor.Detailed characterization results demonstrate the strong interaction between Pd sites and zeolite framework in Pd@ZSM-5 and the efficient stabilization of isolated Pd sites by zeolite thereof.Spectroscopy analyses reveal that the presence of BrΦnsted acid sites is beneficial to methane adsorption and its subsequent activation on adjacent Pd sites,constructing cooperation between Bronsted acid sites and Pd sites within the confined space of MFI zeolite toward high-efficiency methane catalytic combustion.The reaction mechanism of methane combustion catalyzed by Pd@H-ZSM-5 model catalyst is finally discussed.
