密探变装术

如果你是一个密探,发现自己被人跟踪了,怎么办?别紧张,快快使用密探变装术,来个大变身.从一开始,你就应该弄出一些显眼的伪装,比如戴一条鲜艳的围巾,或者改变自己体态形貌。在穿过熙熙攘攘的人群时,迅速摘掉这些伪装,然后轻松逃走。

基于新型冠状病毒感染重症救治下医院供氧能力分析与保障研究

目的 探讨在新型冠状病毒感染重症救治下各类氧源的应急供应能力与安全保障措施。方法 通过对5类呼吸支持方式在不同气源压力、氧浓度值下的耗氧量数据进行采集分析。同时对医疗机构5种主要供氧方式的产氧能力进行计算分析,分别以某三甲医院、二甲医院为例,通过统计2022年12月8日实行核酸自愿检测以来,全院用氧量与该医院总供氧能力进行对比,以期找到最佳保障方式。结果 通过数据采集分析显示,新型冠状病毒感染重症救治下,呼吸机等耗氧设备大量使用,使得氧气供应能力经受较大考验,各医疗机构现有供氧能力难以满足新冠重症救治下的用氧量需求。结论 因此,应重视科学提升供氧能力,加强管理,实行有效监控,做好应急预案,保障医疗重症与急救的正常工作。

基于YOLOv5改进的CBAM平贝母检测模型

目前的平贝母种植阶段中,覆土仍然依靠人工,这存在耗时、耗力、成本高等问题。故需要研制一款智能化的平贝母覆土机器,而实现智能化的第一步在于实现识别。以YOLOv5系列为基础训练出一系列模型,在其系列中挑出最优模型(YOLOv5s)进行改进;进而在骨干段加入CBAM注意力机制替换其C3结合,从而减少网络序列长度,减少计算复杂度。试验结果表明,改进后模型的准确度最高可达91.32%,召回率最高可达88.78%。本文模型的提出为下一步实现平贝母覆土机智能控制提供理论参考。

Location algorithm for seal imprints on Chinese bank-checks based on region growing

The paper focuses on location of seal imprints on Chinese bank-checks based on region growing.Region growing method can be applied to searching and locating connection region in an image.A seal imprint,however,is generally composed of various connection regions which are unconnected to each other.In order to locate the seal imprint,these connection regions must be fused together.In the paper,an algorithm for locating seal imprints on Chinese bankchecks based on region growing is proposed, of which a fusion criterion for connection regions in a seal imprint is put forth based on the image feature of Chinese bankcheck,and a center-rays model is proposed to find the topological relationship between connection regions,for which externally-tangent rectangle of region is used as the mark of location of region.The location experiment is achieved with a false-acceptance rate of 7.1% and a false-rejection rate of 0% on Chinese bankcheck.

High power collimated diode laser stack

A high power collimated diode laser stack is carried out based on fast-axis collimation and stack packaging techniques. The module includes ten typical continuous wave （cw） bars and the total output power can be up to 368W at 48.6A. Using a cylindrical lens as the collimation elements,we can make the fast-axis divergence and the slow-axis divergence are 0. 926 4° and 8. 206° respectively. The light emitting area is limited in a square area of 18.3 mm × 11 mm. The module has the advantage of high power density and offers a wide potential applications in pumping and material processing.

Two Bandwidth Packing Algorithms for the Centralized Wireless Network and Their Average-case Analysis

This paper presents a detail analysis of two bandwidth packing algorithms, used for processing connection requests in the centralized wireless network. Each call comes with a specific bandwidth request. A request can be satisfied only if there is sufficient bandwidth available during resource scheduling and allocation. Unsatisfied requests were held in a queue. The metric of bandwidth utilization ratio was used to quantify the performance of our algorithms. By theoretical analysis, our algorithms can improve the average bandwidth usage ratio significantly, about 8%~10% without adding much computation complexity. Moreover, our algorithms outperform next fit with fragmentation (NFF) algorithm when the bandwidth resource is scarce. In this paper, the contributions follows: Introducing bandwidth packing problem into wireless network; Proposing two new bandwidth packing algorithms for wireless network where the complicate scheduling algorithms are prohibited; Studying the average performance of our algorithms mathematically, which agree well with the simulation results.

Research on new type of fast-opening mechanism in steam turbine regulating system and optimization of operation tactic

With the analysis on regulating system in 200 MW steam turbine, the necessity of appending the fast-opening function to the original system is set forth and a new type of fast-opening mechanism is devised. The mathematical model of system is built up. With the use of AMESIM software, the displacement curve of the piston, the force curve of the cartridge valve spool, the pressure curve and the flux curve in the regulation process are obtained based on simulation. The performances of three fast-opening systems composed of cartridge valves with different diameters are compared. Based on the analysis on factors that affect the execution time of fast-opening, the dead zone of the fast-opening system is put forward. To overcome the defect, dif- ferent operation modes are adopted for different zones. The result shows that with the increase of the valve diameter, the regulating time in the dead zone significantly exceeds the fast-opening time in the whole journey. Accordingly, the optimization operation tactic in the dead zone and the qualification conditions are brought forward. The fast-opening system composed of 32 mm cartridge valves is taken as an example with use of the tactic. The simulation result shows that the maximum regulating time is shortened by 509 ms.

PREPARATION OF POLYELECTROLYTE MULTILAYER COATED MICROBUBBLES FOR USE AS ULTRASOUND CONTRAST AGENT

Objeelive To prepare and characterize polyelectrolyte multilayer film coated microbubbles for use as ultrasound contrast agent （UCA） and evaluate its effects in ultrasonic imaging on normal rabbit＇s fiver parenchyma. Methods Perfluorocarbon （PFC）-containing microbubbles （ST68-PFC） were prepared by sonication based on suffactant （ Span 60 and Tween 80）. Subsequently, the resulting ST68-PFC microbubbles were coated using oppositely charged polyelectrolytes by microbubble-templated layer-by-layer self-assembly technique via electrostatic interaction. The enhancement effects in ultrasonic imaging on normal rabbit＇s liver parenchyma were assessed. Results The obtained microbubbles exhibited a narrow size distribution. The polyelectrolytes were successfully assembled onto the surface of ST68-PFC microbubbles. In vivo experiment showed that polyelectrolyte multilayer film coated UCA effectively enhanced the imaging of rabbit＇s liver parenchyma. Conclusions The novel microbubbles UCA coated with polyelectrolyte multilayer, when enabled more function, has no obvious difference in enhancement effects compared with the pre-modified microbubbles. The polymers with chemically active groups （ such as amino group and carboxyl group） can be used as the outermost layer for attachment of targeting ligands onto microbubbles, allowing selective targeting of the microbubbles to combine with desired sites.

Modification of nanometer calcium carbonate for water-borne architectural coatings

A kind of modifier was synthesized to modify the surface of nanometer calcium carbonate （abbreviated as nano-CaCO3）, which is used in architectural coatings. The modification technology of the nano-CaCO3 was studied through orthogonal experimental methods. The factors studied were rotation speed, modifier dosage, emulsification temperature, emulsification time and heat aging time after emulsification. Optimized conditions for modification of the surface were： rotation speed 16000 r/min; modifier dosage 3%; emulsification temperature 75 ℃; emulsification time 60 min and aging time 40 min. The modified nano-CaCO3 was also studied by size-distribution measurements, transmission electron microscopy, infrared spectroscopy and thermal analysis. The results show that the size distribution of the modified nano-CaCO3 is uniform and that there are chemi-sorption and physi-sorption between the nano-CaCO3 and the modifier. Compared to traditional architectural coatings without nano-CaCO3, the nanometer composite coatings are obviously improved in respect to dirt resistance, scrub resistance, thixotropy, water resistance, alkalinity resistance and aging resistance.

Evaluation on the Two Filling Functions for the Recovery of Forest Information in Mountainous Shadows on Landsat ETM + Image

In general,topographic shadow may reduce performance of forest mapping over mountainous regions in remotely sensed images.In this paper,information in shadow was synthesized by using two filling techniques,namely,roifill and imfill,in order to improve the accuracy of forest mapping over mountainous regions.These two methods were applied to Landsat Enhanced Thematic Mapper (ETM +) multispectral image from Dong Yang County,Zhejiang Province,China.The performance of these methods was compared with two conventional techniques,including cosine correction and multisource classification.The results showed that by applying filling approaches,average overall accuracy of classification was improved by 14 percent.However,through conventional methods this value increased only by 9 percent.The results also revealed that estimated forest area on the basis of shadow-corrected images by 'roifill' technique was much closer to the survey data compared to traditional algorithms.Apart from this finding,our finding indicated that topographic shadow was an accentuated problem in medium resolution images such as Landsat ETM+ over mountainous regions.

Simulation of turbulent combustion in DLR Scramjet

Turbulent combustion in a DLR (German Aerospace Center) Scramjet engine was simulated using the newly-proposed Partially Resolved Numerical Simulation (PRNS) procedure. The PRNS procedure uses temporal filtering to define large-scale turbulence, and the model developed to account for unresolved scales is grid independent. No problem about inner commutation error and inconsistencies will arise from the PRNS, while such issues are of concern in traditional Large Eddy Simulation (LES) methods. The mean results have good agreement with the experiment data and the flow structures with small scales are well resolved.

Combination of Daur Clothing Decorative Art and Modern Fashion Design

On today＇s clothes market and international fashion stage, the dress adornment elements of ethnic minorities have always deeply impressed design masters, received great attention and, are constantly surprising fashion designers. China is a country with multiple ethnic minorities, which have extremely rich ethnic minority dresses and adornment elements. On studying the major dress adornment elements of the Daur, a typical ethnic minority in northern China, we have discovered their strong ethnic features. The major dress adornment elements of the Daur were with the purpose to explore and continue traditions. Combining the modern faskion design with the delicate decorative art that the Daur people sew various laces and embroideries on their dresses, was to discover and use the essence of Chinese ethnic dress and adornments, and demonstrate the talent of ethnic minorities in clothes design. Given what have been founded, combined with the application of modern design methods, the adornment elements of ethnic dresses can represent their ethnic characteristics as well as reflecting the sense of the modern age.

Improved Encapsulation Method of Sensing Element for Cement-Based Piezoelectric Sensor

An improved encapsulation method of a sensing element for a cement-based piezoelectric sensor used in civil engineering structure was developed and some tests were carried out for validating this method. The cement-based piezoelectric sensor of this kind is mainly used in concrete structure due to its compatibility with concrete, and the encapsulation method of its sensing element is important to the effectiveness and accuracy of the transfer of the stress from concrete to the sensing element. The sensor′s measurement error of the previous encapsulation method, which was induced by the area of the encapsulation material and the inherent difference of Young′s modulus between cement and encapsulation material, was analyzed theoretically using parallel model. In the improved method, the error is minimized by decreasing the area of the encapsulation material and changing the configuration of the cement and piezoelectric material in the sensor. Two sensors made by the previous and improved methods were embedded in two prisms respectively and the prisms were compressed on Material Test System. Through the comparison of the measurement errors of the two sensors, the improved method was evaluated. The test results show that the improved encapsulation method is effective and feasible.

Isolated Solid-State Packaging Technology of High-Temperature Pressure Sensor

The principle of miniature isolated solid-state encapsulation technology of high-temperature pressure sensor and the structure of packaging are discussed, including static electricity bonding, stainless steel diaphragm selection and rippled design, laser welding, silicon oil infilling, isolation and other techniques used in sensor packaging, which can affect the performance of the sensor. By adopting stainless steel diaphragm and high-temperature silicon oil as isolation materials, not only the encapsulation of the sensor is as small as 15 mm in diameter and under 1 mA drive, its full range output is 72 mV and zero stability is 0.48% F.S/mon, but also the reliability of the sensor is improved and its application is widely broadened.

Wall Conditioning Operation on the HL-2A Tokamak and Conceptual Design for the Device Modification

During the 2006 experiment campaign of HL-2A, about 2000 shots have been implemented, the plasma current of 433 kA and 3.0 s duration have been obtained. The wall conditioning methods such as glow discharge cleating （GDC） , siliconization and Ti sublimation were applied. The experiment results of wall conditioning research will be introduced in this report. At the same time, the conceptual design of modification of HL-2A tokamak has obtained great progress, two modification schemes have been obtained, and the conceptual design results will be presented.

Path planning of the robot assembly based on Voronoi diagram

Based on the concepts of Voronoi diagram that describes geometry information of the robot assembly in C space, the position vector path parameter equation of the assembly movement between the step shaft and two-sided bearing bracket was given. And the path planning strategy of the component initiative assembly was put forward as well. Theoretical analysis proves that using the Voronoi diagram to do the geometry reasoning on the assembly space can evaluate the feasibility of the component assembly, and can present the reference position vector path of the component movement from the initial configuration to the objective configuration, therefore improves the flexibility of the robot initiative assembly.

Preparation and Characterization of Al_2O_3-TiO_2 Complex Supports by Nano-scale Self-assembly Technique

The two-step nano-scale self-assembly technique and the framework structure mechanism for forming mesoporous supports were employed for preparing Al2O3-TiO2 complex supports with large pore volume that were applied for manufacturing the resid hydrotreating catalysts. The influence of different TiO2 contents and calcination temperatures on specific surface area, pore volume and pore size distribution of complex supports was studied. TEM and SEM were employed to characterize the Al2O3-TiO2 complex supports. Test results revealed that the specific surface area of Al2O3-TiO2 complex supports was the largest at a TiO2 mass fraction of 20%, and when the calcination temperature was in the range between 300 ℃ to 700 ℃, the pore distribution of the complex support was stable. Characterization of the complex support by TEM and SEM demonstrated that TiO2 was homo- geneously distributed in the complex support, which was in favor of carrying active components. The Al2O3-TiO2 complex supports can function as the best catalyst support for resid hydrotreating catalysts.

A new design of foaming agent mixing device for a pneumatic foaming system used for mine dust suppression

To overcome the drawbacks of the conventional foam technology used for dust suppression,including large pressure loss,high water pressure and low driving pressure,a new pneumatic foaming system is introduced.Then an original design of foaming agent mixing device is proposed,and its performance is investigated and evaluated under different pressure compensations.Experimental results show that the maximum absorption amount increases by 2.9-6.7 times at a pressure compensation of 0.04-0.2 MPa compared with no pressure compensation.The pressure loss and pressure fluctuation both reduce significantly with increasing pressure compensation.The critical outlet pressure increases by30.4-240%.Field application indicates that the proposed mixing device ensures the reliable addition of foaming agent used for foam dust suppression.The effect of foam on dust suppression is remarkable,and the economic cost of foam is low.Therefore,there is reason to believe that the new mixing device will greatly promote foam technology to be widely used for suppressing dust in underground coal mines.