In order to validate the simulation model and develop heave compensation control strategy,heave compensation model tests were performed.The model test installation includes themining ship motion simulator,the heave co...In order to validate the simulation model and develop heave compensation control strategy,heave compensation model tests were performed.The model test installation includes themining ship motion simulator,the heave compensation system,the lifting pipe simulator,the buffer simulator and the water pool.The tests ofmining ship motion simulator show that it is able to perform under the predetermined attitude path smoothly and can meet the requirements of themining ship motions.The heave compensation effect is more than 60% under random wave and the goal is set to be 50%.The model test results indicate that this heave compensation system is effective and feasible.展开更多
The uplink achievable rate of massive multiple-input-multiple-output(MIMO) systems, where the low-resolution analog-to-digital converters(ADCs) are assumed to equip at the base station(BS), is investigated in this pap...The uplink achievable rate of massive multiple-input-multiple-output(MIMO) systems, where the low-resolution analog-to-digital converters(ADCs) are assumed to equip at the base station(BS), is investigated in this paper. We assume that only imperfect channel station information is known at the BS. Then a new MMSE receiver is designed by taking not only the Gaussian noise, but also the channel estimation error and quantizer noise into account. By using the Stieltjes transform of random matrix, we further derive a tight asymptotic equivalent for the uplink achievable rate with proposed MMSE receiver. We present a detailed analysis for the number of BS antennas through the expression of the achievable rates and validate the results using numerical simulations. It is also shown that we can compensate the performance loss due to the low-resolution quantization by increasing the number of antennas at the BS.展开更多
An effective method for eddy current calculation has been developed for EAST’s new divertor by using ANSYS.A 3D model of a double null divertor for the EAST device was built to evaluate eddy currents and electromagne...An effective method for eddy current calculation has been developed for EAST’s new divertor by using ANSYS.A 3D model of a double null divertor for the EAST device was built to evaluate eddy currents and electromagnetic(EM)forces on these components.The main input to the model is the plasma current and poloidal field coil currents,which are loaded into the model using experimental data measured from the EAST discharges.These currents generate magnetic fields that match those producing an EAST discharge,and the time variation of these fields produces the eddy currents in the divertors,along with from the resulting EM forces.In addition,the first 10 time steps were discussed for the eddy current generation and changing trend.It indicates that a static analysis before a transient mode start can solve the eddy current origination in the initial time steps.With this method,the EM transient response of EAST’s new divertor can be predicted based on ANSYS simulations.Furthermore,the method is also an effective approach to estimate the EM results for the in-vessel components of a fusion reactor during a disruption.展开更多
基金Project(50675226) supported by the National Natural Science Foundation of China Project(DYXM-115-04-02-01) supported by the Eleventh Five-Year Plan of China
文摘In order to validate the simulation model and develop heave compensation control strategy,heave compensation model tests were performed.The model test installation includes themining ship motion simulator,the heave compensation system,the lifting pipe simulator,the buffer simulator and the water pool.The tests ofmining ship motion simulator show that it is able to perform under the predetermined attitude path smoothly and can meet the requirements of themining ship motions.The heave compensation effect is more than 60% under random wave and the goal is set to be 50%.The model test results indicate that this heave compensation system is effective and feasible.
基金supported by the Beijing Natural Science Foundation under Grant No. L172030the Beijing Municipal Natural Science Foundation under Grant No. 4174102+2 种基金NSFC Project under Grants No. 61471027the National Natural Science Foundation of China under Grant No. 61701017 and Grant No. 61601018the Open Research Fund through the National Mobile Communications Research Laboratory, Southeast University, under Grant No. 2017D01
文摘The uplink achievable rate of massive multiple-input-multiple-output(MIMO) systems, where the low-resolution analog-to-digital converters(ADCs) are assumed to equip at the base station(BS), is investigated in this paper. We assume that only imperfect channel station information is known at the BS. Then a new MMSE receiver is designed by taking not only the Gaussian noise, but also the channel estimation error and quantizer noise into account. By using the Stieltjes transform of random matrix, we further derive a tight asymptotic equivalent for the uplink achievable rate with proposed MMSE receiver. We present a detailed analysis for the number of BS antennas through the expression of the achievable rates and validate the results using numerical simulations. It is also shown that we can compensate the performance loss due to the low-resolution quantization by increasing the number of antennas at the BS.
基金supported by the National Basic Research Program of China("973"Program)(Grant No.2013GB10200)
文摘An effective method for eddy current calculation has been developed for EAST’s new divertor by using ANSYS.A 3D model of a double null divertor for the EAST device was built to evaluate eddy currents and electromagnetic(EM)forces on these components.The main input to the model is the plasma current and poloidal field coil currents,which are loaded into the model using experimental data measured from the EAST discharges.These currents generate magnetic fields that match those producing an EAST discharge,and the time variation of these fields produces the eddy currents in the divertors,along with from the resulting EM forces.In addition,the first 10 time steps were discussed for the eddy current generation and changing trend.It indicates that a static analysis before a transient mode start can solve the eddy current origination in the initial time steps.With this method,the EM transient response of EAST’s new divertor can be predicted based on ANSYS simulations.Furthermore,the method is also an effective approach to estimate the EM results for the in-vessel components of a fusion reactor during a disruption.
