Topography, especially altitude, will influence the way, process and characteristics of land cover changes in mountainous area, simultaneously, the vertical difference of land cover changes will affect soil quality an...Topography, especially altitude, will influence the way, process and characteristics of land cover changes in mountainous area, simultaneously, the vertical difference of land cover changes will affect soil quality and regional ecological environment. Therefore, the gradient relationship analysis between land cover changes and altitude is very important for regional sustainability. This study investigated land cover dynamics based on land cover data from a typical mountainous area in the Guizhou-Guangxi karst mountain area, China, in 2000 and 2010, then explored the relationship between altitude and land cover change and analyzed different drivers of land cover change at different altitudes. Our findings are as follows. 1) From 2000 to 2010, the total area of land cover transition was 7167.04 km^2 or 2.8% of the region. The increasing area of build-up land(926.23 km^2) was larger than that of forest(859.38 km^2), suggesting that the urban construction speed was higher than that of reforestation. 2) Intensity of land cover transition in northwestern Guizhou-Guangxi karst mountain area was much larger than that of southeast part and their transition trend was also significantly different, which was consistent with regional population and economy. 3) Human activity was the most dramatic at altitudes between 0–500 m. For 500–1000 m, grassland mainly converted to forest and build-up land. Area of land cover transition was the greatest between 1000–1500 m, while above 1500 m, the transition of grassland was the most obvious. 4) The drivers of land cover change varied. Land cover change was positively correlated with gross domestic product and population density but was inversely related to relief amplitude. There were correlations between land cover change and distance to roads and rivers, and their correlations varied with altitude. By revealing patterns and causes of land cover changes in different altitudes, we hope to understand the vertical dependence of land cover changes, so as to improve land productivity and protect land ecological environment scientifically.展开更多
Resistance to freezing and thawing of two UHSC （ultra high strength concrete） mixtures was evaluated in accordance with ASTM C 666 Procedure A. The two mixtures （plain and fiber reinforced） were developed using ma...Resistance to freezing and thawing of two UHSC （ultra high strength concrete） mixtures was evaluated in accordance with ASTM C 666 Procedure A. The two mixtures （plain and fiber reinforced） were developed using materials local to southern New Mexico, USA. Three different curing regimens were investigated for the mixture with fibers and one curing regimen was studied for the mixture without fibers. All curing regimens included 24 h of ambient curing followed by four days of wet curing at 50 ℃, and then two days dry curing at 200 ℃. At an age of seven days, one batch of fiber reinforced specimens was air cured at ambient conditions for the following six days and then placed in a water bath at 4.4 ℃ for 24 h prior to initiating freezing and thawing cycles. The second batch was air cured from day seven to day 12, and then wet cured for one day at 23 ℃ prior to being placed in the 4.4 ℃ water bath. The final batch was wet cured at 23 ℃ from the seventh day to an age of 13 days and then placed in the 4.4 ℃ water bath. The mixture with no fibers was air cured from the seventh day to an age of 12 days and then wet cured for one day at 23 ℃ prior to being placed in the 4.4 ℃ water bath. Higher moisture levels during curing produced greater initial dynamic elastic modulus values and durability factors at the end of the freezing and thawing tests, with the greatest durability factor being 87.5. Steel fibers were observed to improve both compressive strength and durability factor for UHSC.展开更多
基金supported by the National Key Basic Research Program of China (973Program, 2015CB452706)the youth talent team program of the Institute of Mountain Hazards and Environment, CAS (SDSQB-2015-01)+1 种基金the National Natural Science Foundation of China (41401198 and 41571527)the Youth Innovation Promotion Association, CAS(No. 2016332)
文摘Topography, especially altitude, will influence the way, process and characteristics of land cover changes in mountainous area, simultaneously, the vertical difference of land cover changes will affect soil quality and regional ecological environment. Therefore, the gradient relationship analysis between land cover changes and altitude is very important for regional sustainability. This study investigated land cover dynamics based on land cover data from a typical mountainous area in the Guizhou-Guangxi karst mountain area, China, in 2000 and 2010, then explored the relationship between altitude and land cover change and analyzed different drivers of land cover change at different altitudes. Our findings are as follows. 1) From 2000 to 2010, the total area of land cover transition was 7167.04 km^2 or 2.8% of the region. The increasing area of build-up land(926.23 km^2) was larger than that of forest(859.38 km^2), suggesting that the urban construction speed was higher than that of reforestation. 2) Intensity of land cover transition in northwestern Guizhou-Guangxi karst mountain area was much larger than that of southeast part and their transition trend was also significantly different, which was consistent with regional population and economy. 3) Human activity was the most dramatic at altitudes between 0–500 m. For 500–1000 m, grassland mainly converted to forest and build-up land. Area of land cover transition was the greatest between 1000–1500 m, while above 1500 m, the transition of grassland was the most obvious. 4) The drivers of land cover change varied. Land cover change was positively correlated with gross domestic product and population density but was inversely related to relief amplitude. There were correlations between land cover change and distance to roads and rivers, and their correlations varied with altitude. By revealing patterns and causes of land cover changes in different altitudes, we hope to understand the vertical dependence of land cover changes, so as to improve land productivity and protect land ecological environment scientifically.
文摘Resistance to freezing and thawing of two UHSC （ultra high strength concrete） mixtures was evaluated in accordance with ASTM C 666 Procedure A. The two mixtures （plain and fiber reinforced） were developed using materials local to southern New Mexico, USA. Three different curing regimens were investigated for the mixture with fibers and one curing regimen was studied for the mixture without fibers. All curing regimens included 24 h of ambient curing followed by four days of wet curing at 50 ℃, and then two days dry curing at 200 ℃. At an age of seven days, one batch of fiber reinforced specimens was air cured at ambient conditions for the following six days and then placed in a water bath at 4.4 ℃ for 24 h prior to initiating freezing and thawing cycles. The second batch was air cured from day seven to day 12, and then wet cured for one day at 23 ℃ prior to being placed in the 4.4 ℃ water bath. The final batch was wet cured at 23 ℃ from the seventh day to an age of 13 days and then placed in the 4.4 ℃ water bath. The mixture with no fibers was air cured from the seventh day to an age of 12 days and then wet cured for one day at 23 ℃ prior to being placed in the 4.4 ℃ water bath. Higher moisture levels during curing produced greater initial dynamic elastic modulus values and durability factors at the end of the freezing and thawing tests, with the greatest durability factor being 87.5. Steel fibers were observed to improve both compressive strength and durability factor for UHSC.
