Nano-composite ceramic coating was fabricated on Q235 steel through thermo chemical reaction method. Structure of the coating was analyzed and the properties were tested. The results show that a few of new ceramic pha...Nano-composite ceramic coating was fabricated on Q235 steel through thermo chemical reaction method. Structure of the coating was analyzed and the properties were tested. The results show that a few of new ceramic phases, such as MgAI2O4, ZnAI2O4, AI2SiO5, Ni3Fe and Fe3AI, are formed on the coating during the process of solidifying at 600 ℃. The ceramic coating is dense and the high bonding strength is obtained. The average bonding strength between the coating and matrix could be 14.22 MPa. The acid resistance of the coating increase by 8.8 times, the alkali resistance by 4.1 times, the salt resistance bv 10.3 times, and the wear resistance bv 2.39 times.展开更多
A novel experimental approach was presented, namely the overlapping elliptical bulge test, which can load and research thickness normal stress. Theoretical analysis model of the overlapping elliptical bulging was desc...A novel experimental approach was presented, namely the overlapping elliptical bulge test, which can load and research thickness normal stress. Theoretical analysis model of the overlapping elliptical bulging was described, the equivalent stress?strain curves of target sheets with different ellipticity ratios were determined experimentally, and influences of the material performance and thickness of overlapping sheets on the flow property of the target sheet were also researched. The results show that, in the overlapping hydraulic bulge test, the equivalent stress?strain curve can be determined up to larger strains before necking than in the no overlapping hydraulic bulge test. And as the die ellipticity ratio decreases, the flow stress curves tend to move away from the curve obtained by circular (b/a=1) bulging test. Meanwhile, the flow property of the target sheet can be improved by choosing higher strength coefficient K, larger work hardening exponent n and proper thickness of the overlapping sheet.展开更多
As for the theory and method in garment structural design according to human figures,a principle for garment design,i.e.body-fitting without added allowance,and a combination of draping and planar design (DPD hereunde...As for the theory and method in garment structural design according to human figures,a principle for garment design,i.e.body-fitting without added allowance,and a combination of draping and planar design (DPD hereunder) for young ladies has been put forward,and,also,a DPD garment prototype for them has been established.And the applied formulae for extensively-practicing operation have been set up,which proves to be,with actual samples,a systematic and practical garment structural designing theory and approach.展开更多
The data used in the process of knowledge discovery often includes noise and incomplete information. The boundaries of different classes of these data are blur and unobvious. When these data are clustered or classifie...The data used in the process of knowledge discovery often includes noise and incomplete information. The boundaries of different classes of these data are blur and unobvious. When these data are clustered or classified, we often get the coverings instead of the partitions, and it usually makes our information system insecure. In this paper, optimal partitioning of incomplete data is researched. Firstly, the relationship of set cover and set partition is discussed, and the distance between set cover and set partition is defined. Secondly, the optimal partitioning of given cover is researched by the combing and parting method, acquiring the optimal partition from three different partitions set family is discussed. Finally, the corresponding optimal algorithm is given. The real wireless signals offten contain a lot of noise, and there are many errors in boundaries when these data is clustered based on the tradional method. In our experimant, the proposed method improves correct rate greatly, and the experimental results demonstrate the method's validity.展开更多
This paper introduces the general process of the search algorithm Structure through the knight problem. According to the characteristics of the problem, we detailed discuss the DFS（Depth First Search） algorithm and ...This paper introduces the general process of the search algorithm Structure through the knight problem. According to the characteristics of the problem, we detailed discuss the DFS（Depth First Search） algorithm and BFS（Breadth First Search） algorithm, and combine the two algorithms together to solve the knights coverage problem. This article has a good reference for the mixed-use scenarios which requires a variety of search algorithms.展开更多
Nanoparticles can be enriched at tumor site and improve the therapeutic efficacy of many chemother- apy drugs with the well-known enhanced permeability and retention （EPR） effect. While conventional preparations of ...Nanoparticles can be enriched at tumor site and improve the therapeutic efficacy of many chemother- apy drugs with the well-known enhanced permeability and retention （EPR） effect. While conventional preparations of materials for nanoscale drug delivery system mainly focused on chemical synthesis, recently the combination of synthetic carrier and natural biomimetic carrier has gained more and more attention. As a new generation of biomimetic nanoparticles, cell membrane-coated nanoparticles combine the complex biological functions of natural membranes and the physicochemical properties of synthetic nanomaterials for a more effective drug delivery. Herein, we briefly review the recent advances on cell membrane-coated nanoparticles for tumor-targeted drug delivery via the prolonging systemic circulation lifetime and the active targeting effect. Since the preferential accumulation of cell membrane-coated nanopar- ticles in tumor site, they are able to improve the therapeutic efficacy of conventional chemotherapy drugs in antitumor treatment as well as to reduce the systemic toxicity. We also introduce a systematic targeted strategy for the promising application of this platform on brain tumors.展开更多
文摘Nano-composite ceramic coating was fabricated on Q235 steel through thermo chemical reaction method. Structure of the coating was analyzed and the properties were tested. The results show that a few of new ceramic phases, such as MgAI2O4, ZnAI2O4, AI2SiO5, Ni3Fe and Fe3AI, are formed on the coating during the process of solidifying at 600 ℃. The ceramic coating is dense and the high bonding strength is obtained. The average bonding strength between the coating and matrix could be 14.22 MPa. The acid resistance of the coating increase by 8.8 times, the alkali resistance by 4.1 times, the salt resistance bv 10.3 times, and the wear resistance bv 2.39 times.
基金Project(2014ZX04002041)supported by the National Science and Technology Major Project,ChinaProject(51175024)supported by the National Natural Science Foundation of China
文摘A novel experimental approach was presented, namely the overlapping elliptical bulge test, which can load and research thickness normal stress. Theoretical analysis model of the overlapping elliptical bulging was described, the equivalent stress?strain curves of target sheets with different ellipticity ratios were determined experimentally, and influences of the material performance and thickness of overlapping sheets on the flow property of the target sheet were also researched. The results show that, in the overlapping hydraulic bulge test, the equivalent stress?strain curve can be determined up to larger strains before necking than in the no overlapping hydraulic bulge test. And as the die ellipticity ratio decreases, the flow stress curves tend to move away from the curve obtained by circular (b/a=1) bulging test. Meanwhile, the flow property of the target sheet can be improved by choosing higher strength coefficient K, larger work hardening exponent n and proper thickness of the overlapping sheet.
文摘As for the theory and method in garment structural design according to human figures,a principle for garment design,i.e.body-fitting without added allowance,and a combination of draping and planar design (DPD hereunder) for young ladies has been put forward,and,also,a DPD garment prototype for them has been established.And the applied formulae for extensively-practicing operation have been set up,which proves to be,with actual samples,a systematic and practical garment structural designing theory and approach.
基金Supported by the National Natural Science Foundation of China (No. 61273302)partially by the Natural Science Foundation of Anhui Province (No. 1208085MF98, 1208085MF94)
文摘The data used in the process of knowledge discovery often includes noise and incomplete information. The boundaries of different classes of these data are blur and unobvious. When these data are clustered or classified, we often get the coverings instead of the partitions, and it usually makes our information system insecure. In this paper, optimal partitioning of incomplete data is researched. Firstly, the relationship of set cover and set partition is discussed, and the distance between set cover and set partition is defined. Secondly, the optimal partitioning of given cover is researched by the combing and parting method, acquiring the optimal partition from three different partitions set family is discussed. Finally, the corresponding optimal algorithm is given. The real wireless signals offten contain a lot of noise, and there are many errors in boundaries when these data is clustered based on the tradional method. In our experimant, the proposed method improves correct rate greatly, and the experimental results demonstrate the method's validity.
文摘This paper introduces the general process of the search algorithm Structure through the knight problem. According to the characteristics of the problem, we detailed discuss the DFS（Depth First Search） algorithm and BFS（Breadth First Search） algorithm, and combine the two algorithms together to solve the knights coverage problem. This article has a good reference for the mixed-use scenarios which requires a variety of search algorithms.
基金supported by the National Basic Research Program of China (2013CB932500)the National Natural Science Foundation of China (81273458 and 81473149)
文摘Nanoparticles can be enriched at tumor site and improve the therapeutic efficacy of many chemother- apy drugs with the well-known enhanced permeability and retention （EPR） effect. While conventional preparations of materials for nanoscale drug delivery system mainly focused on chemical synthesis, recently the combination of synthetic carrier and natural biomimetic carrier has gained more and more attention. As a new generation of biomimetic nanoparticles, cell membrane-coated nanoparticles combine the complex biological functions of natural membranes and the physicochemical properties of synthetic nanomaterials for a more effective drug delivery. Herein, we briefly review the recent advances on cell membrane-coated nanoparticles for tumor-targeted drug delivery via the prolonging systemic circulation lifetime and the active targeting effect. Since the preferential accumulation of cell membrane-coated nanopar- ticles in tumor site, they are able to improve the therapeutic efficacy of conventional chemotherapy drugs in antitumor treatment as well as to reduce the systemic toxicity. We also introduce a systematic targeted strategy for the promising application of this platform on brain tumors.
