期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
基于灰色模糊聚类的压裂水平井见水层段判识方法
1
作者 崔文昊 谷国剑 +2 位作者 朱洪征 常莉静 甘庆明 《数学的实践与认识》 北大核心 2015年第2期130-135,共6页
目前水平井机械找水主要通过井下开关控制逐段生产找水,随着水平井改造段数逐年增加,造成找水测试周期较长,需要将可能见水的射孔段组合进行找水.由于水平井对应注水井多、微裂缝发育造成缝网关系复杂以及超低渗透储层非均质性强,导致... 目前水平井机械找水主要通过井下开关控制逐段生产找水,随着水平井改造段数逐年增加,造成找水测试周期较长,需要将可能见水的射孔段组合进行找水.由于水平井对应注水井多、微裂缝发育造成缝网关系复杂以及超低渗透储层非均质性强,导致来水方向及井筒见水位置判识难度大.以已完成找水措施的水平井各射孔段油藏参数和改造参数为基础,采用灰色关联法对参数优选,并对优选参数进行模糊聚类分析,将聚类结果应用于新见水水平井的出水位置预判,形成一种多段压裂水平井见水层段的辅助判识方法,可将见水层段优化组合,达到缩短水平井找水周期的目的. 展开更多
关键词 水平井 多段压裂 灰色关联 模糊聚类 见水层
原文传递
全新双注入系统的堵水处理
2
作者 S.V.Plahn 钱志富 《吐哈油气》 1999年第2期75-81,共7页
堵水技术有多种,有一种是用强力聚合物凝胶永久性堵死见水区域。该法只准凝胶进入见水层而不会污染邻近产层,因而对用来解决近井地带水的流动问题十分有效。封隔器及桥塞等机械设备可经常对凝胶充填进行控制;可是凝胶仍会沿套管外围窜... 堵水技术有多种,有一种是用强力聚合物凝胶永久性堵死见水区域。该法只准凝胶进入见水层而不会污染邻近产层,因而对用来解决近井地带水的流动问题十分有效。封隔器及桥塞等机械设备可经常对凝胶充填进行控制;可是凝胶仍会沿套管外围窜入产层。在这种情形下,尤其发生严重窜流时,就无法对井进行机械封堵了。在此讨论到的专用凝胶充填即双注入技术可用来解决这种类型的堵水问题。双注入的方式有多种,在此讨论到了一些方式以及全新的双注入系统。 展开更多
关键词 膨胀式封隔器 双注入系统 连续油管 水处理 射孔段 凝胶充填 连通性 见水层 聚合物凝胶 流体
下载PDF
Observation analysis on characteristics of formation,evolution and transition of a long-lasting severe fog and haze episode in North China 被引量:24
3
作者 GUO LiJun GUO XueLiang +1 位作者 FANG ChunGang ZHU ShiChao 《Science China Earth Sciences》 SCIE EI CAS CSCD 2015年第3期329-344,共16页
An unusual fog and haze event lasted for one week took place during 1–7 December,2011 over North China.To investigate the characteristics and mechanism of formation,evolution,and transition of the fog and haze event,... An unusual fog and haze event lasted for one week took place during 1–7 December,2011 over North China.To investigate the characteristics and mechanism of formation,evolution,and transition of the fog and haze event,we studied the microphysical properties such as aerosol,cloud condensation nuclei(CCN),fog droplet spectrum and liquid water content(LWC),as well as horizontal visibility and boundary layer properties,using the data collected in the Project of Low-Visibility Weather Monitoring and Forecasting in the Beijing-Tianjin region.The results indicate that the long-lasting fog and haze event occurred in a high pressure weather system and calm wind condition.The stable boundary-layer structure resulted from temperature inversions that were built by warm advection and radiation cooling provided a favorable condition for the accumulation of polluted aerosols and the formation and development of the fog and haze event.In particular,the continuous southerly wet flow advection made the process a persistent and long-lasting event.The horizontal visibility was almost below 2 km in the whole process,and the lowest visibility was only 56 m.The average LWC was about 10-3 g m-3,and the maximum LWC reached 0.16 g m-3.The aerosol number concentration was more than 10000 cm-3,and its mass concentration ranged from 50 to 160 -g m-3.The further study shows that the fog and haze event experienced three main processes in different intensities during the whole period,each process could be divided into three main stages:aerosol accumulation,transition and mixture of aerosol and fog,and dissipation.Each stage had different physical features:the aerosol accumulation stage was characterized by the increase of aerosol number concentration in Aitken nuclei and accumulation mode sequentially.In the transition and mixing stage of fog and haze,the latent heating produced by fog droplet condensation process and high aerosol number concentration condition intensified the Brownian coagulation process,which induced the small size of aerosols to become larger ones and enhanced the CCN activation process,thereby promoting the explosive development of the fog event.The ratio of aerosol activated to CCN reached 17%,and the ratio of CCN converted to fog droplet exceeded 100%,showing an explosively broadening of fog droplet spectrum.The decrease and dissipation of the fog was caused by an increased solar radiation heating or the passage of cold frontal system. 展开更多
关键词 haze and fog aerosol accumulation transition of haze into fog North China
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部