The dilemma of the quantization parameter (QP) being involved in both rate control and rate-distortion optimization (RDO) prevents using the traditional rate control scheme. Although some rate control schemes are prop...The dilemma of the quantization parameter (QP) being involved in both rate control and rate-distortion optimization (RDO) prevents using the traditional rate control scheme. Although some rate control schemes are proposed to circumvent the dilemma, the inaccurate prediction model and improper bit allocation deter H.264 application on low bandwidth channel. To resolve this issue, this paper proposes a novel rate control scheme by considering the macroblock (MB) encoding complexity variation and buffer variation and by exploiting the spatio-temporal correlation sufficiently well. Simulations showed that this scheme improves the perceptual quality of the pictures with similar or smaller PSNR deviations when compared to that of rate control in JVT-O016.展开更多
Wyner-Ziv Video Coding （WZVC） is considered as a promising video coding scheme for Wireless Video Sensor Networks （WVSNs） due to its high compression efficiency and error resilience functionalities, as well as its...Wyner-Ziv Video Coding （WZVC） is considered as a promising video coding scheme for Wireless Video Sensor Networks （WVSNs） due to its high compression efficiency and error resilience functionalities, as well as its low encoding complex- ity. To achieve a good Rate-Distortion （R-D） per- formance, the current WZVC paradi^prls usually a- dopt an end-to-end rate control scheme in which the decoder repeatedly requests the additional deco- ding data from the encoder for decoding Wyner-Ziv frames. Therefore, the waiting time of the additional decoding data is especially long in multihop WVSNs. In this paper, we propose a novel pro- gressive in-network rate control scheme for WZVC. The proposed in-network puncturing-based rate control scheme transfers the partial channel codes puncturing task from the encoder to the relay nodes. Then, the decoder can request the addition- al decoding data from the relay nodes instead of the encoder, and the total waiting time for deco- ding Wyner-Ziv frames is reduced consequently. Simulation results validate the proposed rate con- trol scheme.展开更多
This letter proposes a rate control algorithm for H.264 video encoder, which is based on block activity and buffer state. Experimental results indicate that it has an excellent performance by providing much accurate b...This letter proposes a rate control algorithm for H.264 video encoder, which is based on block activity and buffer state. Experimental results indicate that it has an excellent performance by providing much accurate bit rate and better coding efficiency compared with H.264. The computational complexity of the algorithm is reduced by adopting a novel block activity description method using the Sum of Absolute Difference (SAD) of 16× 16 mode, and its robustness is enhanced by introducing a feedback circuit at frame layer.展开更多
Rate control plays an important role in video coding. An algorithm is proposed by Tsai et al in which macroblock’s coding order is rearranged to improve the coding quality. However, the complexity is very high due to...Rate control plays an important role in video coding. An algorithm is proposed by Tsai et al in which macroblock’s coding order is rearranged to improve the coding quality. However, the complexity is very high due to the change of macroblock’s coding order. In this paper, a macroblocl-level rate control algorithm is proposed which recalculates the quantization parameter of each macroblock based on its significance. Simulation results show that the proposed algorithm not only achieves 0.1-0.6 dB in peak signal-to-noise ratio (PSNR) but also reduces 33%-55% total encoding time compared to Tsai’s algorithm.展开更多
Frame skipping in low bit video coding could significantly reduce the visual quality of reconstructed video. At the same time, if the complexity of the video sequence remains high for a long period, then driving up th...Frame skipping in low bit video coding could significantly reduce the visual quality of reconstructed video. At the same time, if the complexity of the video sequence remains high for a long period, then driving up the long term average bit rate, the only resort of MPEG-4 Q2 rate control algorithm results in using a high quantization scale, which shows a poor visual quality of the reconstructed video. This paper analyzes the main causes of frame skipping in current MPEG-4 frame rate control scheme, and presents a new rate control algorithm based on the quadratic R-D model over a CBR channel. Key features of the present work are: 1) the bits allocated to each P-frame or B-frame are in proportion to its distance from the end of this GOP, i.e. more bits are allocated to the frames that are nearer to their reference Ⅰ-frame; 2) the target buffer level is changeable in the GOP, at the end of each GOP(five P-frames or B-frames), the target buffer level is linearly reduced from 1/2 to 1/4 of buffer size, to other frames, the target buffer level is set to 1/2 of buffer size; 3) a selective and judicious use of the reduced resolution mode, in addition to a modulation of the quantization scale parameter, is to control the average long term bit rate. Experimental results with different video sequences of varied complexity, encoded at low bit rates show better efficacy of the proposed algorithm than MPEG-4 Q2 rate control scheme, and the experimental results also show that the improved algorithm has significantly reduced the number of frame skipping, increased the overall PSNR, and improved the perceptual quality.展开更多
To meet the requirement of high-quality transmission of videos captured by unmanned aerial vehicles （UAV） with low bandwidth, a novel rate control （RC） scheme based on region-of-interest （ROI） is proposed. First...To meet the requirement of high-quality transmission of videos captured by unmanned aerial vehicles （UAV） with low bandwidth, a novel rate control （RC） scheme based on region-of-interest （ROI） is proposed. First, the ROI information is sent to the encoder with the latest high efficient video coding （HEVC） standard to generate an ROI map. Then, by using the ROI map, bit allocation methods are developed at frame level and large coding unit （LCU） level, to avoid inaccurate bit allocation produced by camera movement. At last, by using a better robustness R-2 model, the quantization parameter （QP） for each LCU is calculated. The experimental results show that the proposed RC method can get a lower bitrate error and a higher quality for reconstructed video by choosing appropriate pixel weight on the HEVC platform.展开更多
文摘The dilemma of the quantization parameter (QP) being involved in both rate control and rate-distortion optimization (RDO) prevents using the traditional rate control scheme. Although some rate control schemes are proposed to circumvent the dilemma, the inaccurate prediction model and improper bit allocation deter H.264 application on low bandwidth channel. To resolve this issue, this paper proposes a novel rate control scheme by considering the macroblock (MB) encoding complexity variation and buffer variation and by exploiting the spatio-temporal correlation sufficiently well. Simulations showed that this scheme improves the perceptual quality of the pictures with similar or smaller PSNR deviations when compared to that of rate control in JVT-O016.
基金This paper was supported by the National Key Basic Re- search Program of China under Grant No. 2011 CB302701 the National Natural Science Foundation of China under Grants No. 60833009, No. 61133015+2 种基金 the China National Funds for Distinguished Young Scientists under Grant No. 60925010 the Funds for Creative Research Groups of China under Grant No. 61121001 the Program for Changjiang Scholars and Innovative Research Team in University under Grant No. IRT1049.
文摘Wyner-Ziv Video Coding （WZVC） is considered as a promising video coding scheme for Wireless Video Sensor Networks （WVSNs） due to its high compression efficiency and error resilience functionalities, as well as its low encoding complex- ity. To achieve a good Rate-Distortion （R-D） per- formance, the current WZVC paradi^prls usually a- dopt an end-to-end rate control scheme in which the decoder repeatedly requests the additional deco- ding data from the encoder for decoding Wyner-Ziv frames. Therefore, the waiting time of the additional decoding data is especially long in multihop WVSNs. In this paper, we propose a novel pro- gressive in-network rate control scheme for WZVC. The proposed in-network puncturing-based rate control scheme transfers the partial channel codes puncturing task from the encoder to the relay nodes. Then, the decoder can request the addition- al decoding data from the relay nodes instead of the encoder, and the total waiting time for deco- ding Wyner-Ziv frames is reduced consequently. Simulation results validate the proposed rate con- trol scheme.
基金the National Nature Science Foundation of China(No.90104013) 863 Project(No.2002AA119010, 2001AA121061 and 2002AA123041)
文摘This letter proposes a rate control algorithm for H.264 video encoder, which is based on block activity and buffer state. Experimental results indicate that it has an excellent performance by providing much accurate bit rate and better coding efficiency compared with H.264. The computational complexity of the algorithm is reduced by adopting a novel block activity description method using the Sum of Absolute Difference (SAD) of 16× 16 mode, and its robustness is enhanced by introducing a feedback circuit at frame layer.
文摘Rate control plays an important role in video coding. An algorithm is proposed by Tsai et al in which macroblock’s coding order is rearranged to improve the coding quality. However, the complexity is very high due to the change of macroblock’s coding order. In this paper, a macroblocl-level rate control algorithm is proposed which recalculates the quantization parameter of each macroblock based on its significance. Simulation results show that the proposed algorithm not only achieves 0.1-0.6 dB in peak signal-to-noise ratio (PSNR) but also reduces 33%-55% total encoding time compared to Tsai’s algorithm.
文摘Frame skipping in low bit video coding could significantly reduce the visual quality of reconstructed video. At the same time, if the complexity of the video sequence remains high for a long period, then driving up the long term average bit rate, the only resort of MPEG-4 Q2 rate control algorithm results in using a high quantization scale, which shows a poor visual quality of the reconstructed video. This paper analyzes the main causes of frame skipping in current MPEG-4 frame rate control scheme, and presents a new rate control algorithm based on the quadratic R-D model over a CBR channel. Key features of the present work are: 1) the bits allocated to each P-frame or B-frame are in proportion to its distance from the end of this GOP, i.e. more bits are allocated to the frames that are nearer to their reference Ⅰ-frame; 2) the target buffer level is changeable in the GOP, at the end of each GOP(five P-frames or B-frames), the target buffer level is linearly reduced from 1/2 to 1/4 of buffer size, to other frames, the target buffer level is set to 1/2 of buffer size; 3) a selective and judicious use of the reduced resolution mode, in addition to a modulation of the quantization scale parameter, is to control the average long term bit rate. Experimental results with different video sequences of varied complexity, encoded at low bit rates show better efficacy of the proposed algorithm than MPEG-4 Q2 rate control scheme, and the experimental results also show that the improved algorithm has significantly reduced the number of frame skipping, increased the overall PSNR, and improved the perceptual quality.
文摘To meet the requirement of high-quality transmission of videos captured by unmanned aerial vehicles （UAV） with low bandwidth, a novel rate control （RC） scheme based on region-of-interest （ROI） is proposed. First, the ROI information is sent to the encoder with the latest high efficient video coding （HEVC） standard to generate an ROI map. Then, by using the ROI map, bit allocation methods are developed at frame level and large coding unit （LCU） level, to avoid inaccurate bit allocation produced by camera movement. At last, by using a better robustness R-2 model, the quantization parameter （QP） for each LCU is calculated. The experimental results show that the proposed RC method can get a lower bitrate error and a higher quality for reconstructed video by choosing appropriate pixel weight on the HEVC platform.
