Pre-stack depth migration velocity analysis is one of the keys to influencing the imaging quality of pre-stack migration.In this paper we cover a residual curvature velocity analysis method on angle-domain common imag...Pre-stack depth migration velocity analysis is one of the keys to influencing the imaging quality of pre-stack migration.In this paper we cover a residual curvature velocity analysis method on angle-domain common image gathers（ADCIGs） which can depict the relationship between incident angle and migration depth at imaging points and update the migration velocity.Differing from offset-domain common image gathers（ODCIGs）,ADCIGs are not disturbed by the multi-path problem which contributes to imaging artifacts,thus influencing the velocity analysis.On the basis of horizontal layers,we derive the residual depth equation and also propose a velocity analysis workflow for velocity scanning.The tests to synthetic and field data prove the velocity analysis methods adopted in this paper are robust and valid.展开更多
Seismic migration moves reflections to their true subsurface positions and yields seismic images of subsurface areas. However, due to limited acquisition aperture, complex overburden structure and target dipping angle...Seismic migration moves reflections to their true subsurface positions and yields seismic images of subsurface areas. However, due to limited acquisition aperture, complex overburden structure and target dipping angle, the migration often generates a distorted image of the actual subsurface structure. Seismic illumination and resolution analyses provide a quantitative description of how the above-mentioned factors distort the image. The point spread function （PSF） gives the resolution of the depth image and carries full information about the factors affecting the quality of the image. The staining algorithm establishes a correspondence between a certain structure and its relevant wavefield and reflected data. In this paper, we use the staining algorithm to calculate the PSFs, then use these PSFs for extracting the acquisition dip response and correcting the original depth image by deconvolution. We present relevant results of the SEG salt model. The staining algorithm provides an efficient tool for calculating the PSF and for conducting broadband seismic illumination and resolution analyses.展开更多
In this paper, the dimension formulaes of multivariate weak spline are discussed. The dimension formulaes of non-degree multivariate weak spline on a vertex are presented. The dimension formulaes on triangulation are ...In this paper, the dimension formulaes of multivariate weak spline are discussed. The dimension formulaes of non-degree multivariate weak spline on a vertex are presented. The dimension formulaes on triangulation are also discussed. At last, the local supported bases of W31(I1Δ) are presented.展开更多
Y2001-62954-22 0117096城市环境中蜂房式基地台的空间、极化和角分集室内、室外测量=Indoor and outdoor measurements of space,polarization,and angle diversity for cellular base stationin urban environments[会,英]/Kim,B.K.&a...Y2001-62954-22 0117096城市环境中蜂房式基地台的空间、极化和角分集室内、室外测量=Indoor and outdoor measurements of space,polarization,and angle diversity for cellular base stationin urban environments[会,英]/Kim,B.K.& Stutz-man,W.L.//2000 IEEE 52nd Vehicular TechnologyConference,Vol.1.—22～29(PC)报道了在城市环境中工作的蜂房式基地台的空间、极化与角分集室内外测量结果与性能比较。利用多径环境中角分集用的高天线增益、极化失配和分集增益确定了三种分集方案在恒等条件下的相对性能。展开更多
In this paper, a new triangular decomposition algorithm is proposed for ordinary differential polynomial systems, which has triple exponential computational complexity. The key idea is to eliminate one algebraic varia...In this paper, a new triangular decomposition algorithm is proposed for ordinary differential polynomial systems, which has triple exponential computational complexity. The key idea is to eliminate one algebraic variable from a set of polynomials in one step using the theory of multivariate resultant. This seems to be the first differential triangular decomposition algorithm with elementary computation complexity.展开更多
Twenty-two soil samples were collected at the subregional scale （50 km2） around Gudao Town, a typical oil-producing region of the Shengli Oilfield in the Yellow River Delta, China to determine the spatial distributi...Twenty-two soil samples were collected at the subregional scale （50 km2） around Gudao Town, a typical oil-producing region of the Shengli Oilfield in the Yellow River Delta, China to determine the spatial distribution patterns and potential sources of heavy metals in soils of crude oil-polluted regions. The concentrations of total petroleum hydrocaxbons （TPHs） and heavy metals as well as other soil properties were determined and the enrichment factor values were calculated for the heavy metals measured. Principal component analysis （PCA） and cluster analysis （CA） were used to estimate potential sources contributing to the concentrations of heavy metals in the soils. The results revealed that the soils were slightly alkaline （pH = 7.33-8.05） and high in salinity （1.43-41.30 g kg-1）, TPHs （0.51 28.40 g kg-1） and organic matter （1.74-31.50 g kg-1）. The mean concentrations of the measured heavy metals Cu, Zn, Pb, Cd, Cr, Ni and V were 18.4, 78.2, 20.8, 0.19, 56.6, 26.3 and 62.1 mg kg-1, respectively. Although the concentrations of all the metals measured in this study were not high enough to exceed the national control standards, there was a significant enrichment of Cd in the study area and Zn and Ni were in the category of deficiency to minimal enrichment. The spatial distribution patterns of Cu, Cr, Ni and V were similar and partially affected by oil exploitation and petroleum hydrocarbon spills. Potential sources of Cr, Ni, V and Cu in the soils were both natural sources and petroleum hydrocarbon spills, while Zn, Pb and Cd were probably from anthropogenic sources such as farming activities and traffic.展开更多
基金supported by the National 863 Program (Grant No.2006AA06Z206,Sustained supported)the National Science and Technology Major Project (Grant No.2008ZX05006-004)SinoPec Group Marine Facies Research (Grant No.08370502000410)
文摘Pre-stack depth migration velocity analysis is one of the keys to influencing the imaging quality of pre-stack migration.In this paper we cover a residual curvature velocity analysis method on angle-domain common image gathers（ADCIGs） which can depict the relationship between incident angle and migration depth at imaging points and update the migration velocity.Differing from offset-domain common image gathers（ODCIGs）,ADCIGs are not disturbed by the multi-path problem which contributes to imaging artifacts,thus influencing the velocity analysis.On the basis of horizontal layers,we derive the residual depth equation and also propose a velocity analysis workflow for velocity scanning.The tests to synthetic and field data prove the velocity analysis methods adopted in this paper are robust and valid.
基金funded by the National Natural Science Foundation of China(No.41374006 and 41274117)
文摘Seismic migration moves reflections to their true subsurface positions and yields seismic images of subsurface areas. However, due to limited acquisition aperture, complex overburden structure and target dipping angle, the migration often generates a distorted image of the actual subsurface structure. Seismic illumination and resolution analyses provide a quantitative description of how the above-mentioned factors distort the image. The point spread function （PSF） gives the resolution of the depth image and carries full information about the factors affecting the quality of the image. The staining algorithm establishes a correspondence between a certain structure and its relevant wavefield and reflected data. In this paper, we use the staining algorithm to calculate the PSFs, then use these PSFs for extracting the acquisition dip response and correcting the original depth image by deconvolution. We present relevant results of the SEG salt model. The staining algorithm provides an efficient tool for calculating the PSF and for conducting broadband seismic illumination and resolution analyses.
基金Project supported by the National Natural Science Foundation of China (19871010, 69973010)
文摘In this paper, the dimension formulaes of multivariate weak spline are discussed. The dimension formulaes of non-degree multivariate weak spline on a vertex are presented. The dimension formulaes on triangulation are also discussed. At last, the local supported bases of W31(I1Δ) are presented.
文摘Y2001-62954-22 0117096城市环境中蜂房式基地台的空间、极化和角分集室内、室外测量=Indoor and outdoor measurements of space,polarization,and angle diversity for cellular base stationin urban environments[会,英]/Kim,B.K.& Stutz-man,W.L.//2000 IEEE 52nd Vehicular TechnologyConference,Vol.1.—22～29(PC)报道了在城市环境中工作的蜂房式基地台的空间、极化与角分集室内外测量结果与性能比较。利用多径环境中角分集用的高天线增益、极化失配和分集增益确定了三种分集方案在恒等条件下的相对性能。
基金supported by the National Natural Science Foundation of China under Grant No.60821002the National Key Basic Research Project of China
文摘In this paper, a new triangular decomposition algorithm is proposed for ordinary differential polynomial systems, which has triple exponential computational complexity. The key idea is to eliminate one algebraic variable from a set of polynomials in one step using the theory of multivariate resultant. This seems to be the first differential triangular decomposition algorithm with elementary computation complexity.
基金Supported by the Environmental Protection Public Welfare Industry Research Program of China(No.201109022)
文摘Twenty-two soil samples were collected at the subregional scale （50 km2） around Gudao Town, a typical oil-producing region of the Shengli Oilfield in the Yellow River Delta, China to determine the spatial distribution patterns and potential sources of heavy metals in soils of crude oil-polluted regions. The concentrations of total petroleum hydrocaxbons （TPHs） and heavy metals as well as other soil properties were determined and the enrichment factor values were calculated for the heavy metals measured. Principal component analysis （PCA） and cluster analysis （CA） were used to estimate potential sources contributing to the concentrations of heavy metals in the soils. The results revealed that the soils were slightly alkaline （pH = 7.33-8.05） and high in salinity （1.43-41.30 g kg-1）, TPHs （0.51 28.40 g kg-1） and organic matter （1.74-31.50 g kg-1）. The mean concentrations of the measured heavy metals Cu, Zn, Pb, Cd, Cr, Ni and V were 18.4, 78.2, 20.8, 0.19, 56.6, 26.3 and 62.1 mg kg-1, respectively. Although the concentrations of all the metals measured in this study were not high enough to exceed the national control standards, there was a significant enrichment of Cd in the study area and Zn and Ni were in the category of deficiency to minimal enrichment. The spatial distribution patterns of Cu, Cr, Ni and V were similar and partially affected by oil exploitation and petroleum hydrocarbon spills. Potential sources of Cr, Ni, V and Cu in the soils were both natural sources and petroleum hydrocarbon spills, while Zn, Pb and Cd were probably from anthropogenic sources such as farming activities and traffic.
