光谱角余弦与相关系数测度组合的光谱匹配分类方法与实验

光谱相似性测度是高光谱影像光谱匹配分类的准则,但单一的光谱相似性测度不能综合考虑光谱曲线的形状、辐射等多种特征,因此将其用于高光谱影像光谱匹配分类时精度较低,研究发现两种或多种相似性测度的组合能够有效提高光谱匹配分类的精度。在光谱角余弦测度和相关系数测度的基础上,采用算术平均的组合方式,得到光谱角余弦-相关系数测度,将其用于光谱匹配分类,实现光谱角余弦与相关系数测度组合的光谱匹配分类方法。提出了基于光谱角余弦-相关系数测度的光谱匹配分类流程,通过ROSIS和OMIS两组高光谱影像分类实验表明,相比于光谱角余弦测度和相关系数测度,将光谱角余弦-相关系数测度用于光谱匹配分类能够得到较高的总体分类精度,对单一地物的分类精度也有一定程度的改善。

赋范空间中广义角分线及其相关性质

为说明不同角分线之间的关系对空间性质的影响,通过讨论B-角分线和D-角分线之间的关系证明若赋范线性空间中B-角分线与D-角分线保持一致,则该空间是欧氏空间.并且利用此结论得到了赋范空间成为欧氏空间的新的特征性质.

Evaluation of corneal parameter changes under different accommodative stimuli with Scheimpflug imaging-based tomography

AIM:To evaluate the reliability of measurements of corneal changes with accommodation in healthy eyes using a Scheimpflug imaging-based system and how these measurements distribute in the normal population.METHODS:Prospective,non-randomized,comparative study including 27 healthy subjects(54 eyes),including emmetropia(13 eyes),myopia(17 eyes),hyperopia(4 eyes)and astigmatism(20 eyes)groups.In all cases,a complete eye examination was performed,including the analysis of corneal changes with different accommodative stimuli(+2.00,0.00 and-3.00 D)using the Pentacam AXL system.The investigation was structured in 2 phases:repeatability analysis and characterization of accommodation-related corneal changes in healthy populations.RESULTS:In the repeatability analysis,the index of height asymmetry(IHA)showed the greatest variability with the three accommodative stimuli,being the results for the rest of parameters acceptable.The group of emmetropes showed significant differences with accommodative changes in the position of maximum keratometry(Kmax;P<0.05),whereas in the astigmatism group,significant changes were not only observed in the position of Kmax,but also in minimum corneal thickness(MCT),corneal spherical aberration,and total and low order aberration root mean square(all P<0.05).Likewise,a significant difference was found in the displacement of the X position of Kmax with+2.00 D and-3.00 D in the myopia group(P=0.033)as well as in changes with+2.00 D and-3.00 D in the magnitude of the position vector of Kmax in the emmetropia group(P<0.05).No significant changes were found between accommodative stimuli in the displacement of coordinates of MCT(P≥0.109).CONCLUSION:The position of Kmax and MCT in healthy corneas can change significantly when presenting different accommodative stimuli using the accommodation mode of the Pentacam system,with different trends in these accommodation-related corneal changes between refractive errors.Likewise,the consistency of the measurements obtained with Scheimpflug has been confirmed.

Measurement of Angular and Linear Accelerations Using Linear Accelerometers

In order to solve the problem, which may be encountered by those former schemes, such as six accelerometer, nine accelerometer configuration, under specific conditions, a ten accelerometer configuration was presented to compute the rotational and translational accelerations of a rigid body, based on well known kinematics principles. The theoretical analysis shows that the configuration can meet the requirement. The simulation results of this scheme show promise for measuring a rigid body's rotational and translational accelerations.

Target Seeker Gyro and Controls

A composite target seeker gyro with dual spectral range infrared rays and millimeter waves, and the associated control methodology are developed. The static pressure air floated ball bearing is used to sustain the outer frame, the optical fiber and wave guide are used to transmit these two kinds of signals to the rear part of the gyro, and the stator coils are used to get non contact angular measurement. Composite guiding, scanning, tracing and controlling can be achieved, the maximum tracing angular velocity can be as high as 16(°)/s.

角点测度在月球表面多光谱图像融合中的应用

根据Harris角点检测原理,提出角点测度的概念,并以角点测度响应值作为高频图像融合系数的选择依据,进而提出基于图像冗余小波域的角点测度重要中心系数算法。算法首先利用冗余小波变换把多光谱图像分解成小波平面和相似平面,然后利用角点测度响应函数来估计小波平面的角点测度,用基于角点测度响应值的重要中心系数融合规则融合小波平面。对相似平面则采取加权平均的融合规则,最后通过冗余小波逆变换得到融合图像。在实验中,用Clementine月球表面多光谱数据和SPOT5多光谱数据验证了算法的有效性,并和其他方法做了比较,除了基于视觉的主观比较以外,还引入了标准差、熵、清晰度和相关系数等客观评价指标对融合结果进行评价,结果表明,算法有效地保持了原图像的细节特征,如边缘、角点等。

Coordinate unification method of high-precision composite measurement in two dimensions

Multi-sensor coordinate unification in dimensional metrology is used in order to get holistic, more accurate and reliable information about a workpiece based on several or multiple measurement values from one or more sensors. Because of the problem that standard ball is deficient as a standard artifact in the coordinate unification of high-precision composite measurement in two dimensions （2D） , a new method is proposed in this paper which uses angle gauge blocks as standard artifacts to achieve coordinate unification between the image sensor and the tactile probe. By comparing the standard ball with the angle gauge block as a standard artifact, theoretical analysis and experimental results are given to prove that it is more precise and more convenient to use angle gauge blocks as standard artifacts to achieve coordinate unification of high-precision composite measurement in two dimensions.

Circular smooth muscle contributes to esophageal shortening during peristalsis

AIM:To study the angle between the circular smooth muscle(CSM) and longitudinal smooth muscle(LSM) fibers in the distal esophagus.METHODS:In order to identify possible mechanisms for greater shortening in the distal compared to proximal esophagus during peristalsis,the angles between the LSM and CSM layers were measured in 9 cadavers.The outer longitudinal layer of the muscularis propria was exposed after stripping the outer serosa.The inner circular layer of the muscularis propria was then revealed after dissection of the esophageal mucosa and the underlying muscularis mucosa.Photographs of each specimen were taken with half of the open esophagus folded back showing both the outer longitudinal and inner circular muscle layers.Angles were measured every one cm for 10 cm proximal to the squamocolumnar junction(SCJ) by two independent investigators.Two human esophagi were obtained from organ transplant donors and the angles between the circular and longitudinal smooth muscle layers were measured using micro-computed tomography(micro CT) and Image J software.RESULTS:All data are presented as mean ± SE.The CSM to LSM angle at the SCJ and 1 cm proximal to SCJ on the autopsy specimens was 69.3 ± 4.62 degrees vs 74.9 ± 3.09 degrees,P = 0.32.The CSM to LSM angle at SCJ were statistically significantly lower than at 2,3,4 and 5 cm proximal to the SCJ,69.3 ± 4.62 degrees vs 82.58 ± 1.34 degrees,84.04 ± 1.64 degrees,84.87 ± 1.04 degrees and 83.72 ± 1.42 degrees,P = 0.013,P = 0.008,P = 0.004,P = 0.009 respectively.The CSM to LSM angle at SCJ was also statistically significantly lower than the angles at 6,7 and 8 cm proximal to the SCJ,69.3 ± 4.62 degrees vs 80.18 ± 2.09 degrees,81.81 ± 1.75 degrees and 80.96 ± 2.04 degrees,P = 0.05,P = 0.02,P = 0.03 respectively.The CSM to LSM angle at 1 cm proximal to SCJ was statistically significantly lower than at 3,4 and 5 cm proximal to the SCJ,74.94 ± 3.09 degrees vs 84.04 ± 1.64 degrees,84.87 ± 1.04 degrees and 83.72 ± 1.42 degrees,P = 0.019,P = 0.008,P = 0.02 respectively.At 10 cm above SCJ the angle was 80.06 ± 2.13 degrees which is close to being perpendicular but less than 90 degrees.The CSM to LSM angles measured on virtual dissection of the esophagus and the stomach on micro CT at the SCJ and 1 cm proximal to the SCJ were 48.39 ± 0.72 degrees and 50.81 ± 1.59 degrees.Rather than the angle of the CSM and LSM being perpendicular in the esophagus we found an acute angulation between these two muscle groups throughout the lower 10 cm of the esophagus.CONCLUSION:The oblique angulation of the CSM may contribute to the significantly greater shortening of distal esophagus when compared to the mid and proximal esophagus during peristalsis.

Influence of Atmospheric Refraction on Horizontal Angle Surveying

Side-refraction is the main error source of horizontal angle surveying, but it has little influence on the sides by analyzing the influence of atmospheric-infraction on the ultrahigh-precision side and angle surveying. Choosing oriented direction is crucial to distance and angle measurement in triangulateration network. How to select the oriented direction during angle measurement is presented, and the means to check the quality of auto-surveying with Georobot is brought forward as well. At last some solutions to reduce the influence of side-refraction while disposing and surveying ultrahigh-precision triangulateration network are put forward.

A novel estimation algorithm for torpedo tracking in undersea environment

A novel estimation algorithm is introduced to handle the popular undersea problem called torpedo tracking with angle-only measurements with a better approach compared to the existing filters. The new algorithm produces a better estimate from the outputs produced by the traditional nonlinear approaches with the assistance of simple noise minimizers like maximum likelihood filter or any other algorithm which belongs to their family. The introduced method is extended to the higher version in two ways. The first approach extracts a better estimate and covariance by enhancing the count of the intermediate filters, while the second approach accepts more inputs so as to attain improved performance without enhancement of the intermediate filter count. The ideal choice of the placement of towed array sensors to improve the performance of the proposed method further is suggested as the one where the line of sight and the towed array are perpendicular. The results could get even better by moving the ownship in the direction of reducing range. All the results are verified in the MATLAB environment.

Selection of Measured Signals in the Navigation Measuring Complex

To increase accuracy of navigation parameters,a perspective measuring complex with intellectual components is developed.Conception of synthesis optimal structure of the measuring complex is realized basing on a selective method using principles of the functional systems.Selection of measured information is finished by original numeric criterion of observation level of state vector components.Prediction is realized by algorithm of self-organization that makes synthesis of the optimal complication.Therefore mechanism of self-regulation is realized and accuracy of the selective navigation complex is increased.

Application and testing of a vertical angle control for a boom-type road header

Automatic profiling control using a boom-type roadheader requires an understanding of horizontal and vertical swing angles of the cutting boom. In this study the vertical angle of the cutting boom is discussed. First, a vertical swing detection model for the cutting boom is established. Then, a kinematic analysis of the vertical swing mechanism is made and formulae describing the geometrical relationship between the vertical swing of the cutting boom and the telescopic length of vertical hydraulic lift cylinders and vertical swing angle of the boom are presented. Various factors such as complexity of the calculation model, the difficulty of installing the sensor and the cost are compared for two methods. Finally, directly measuring the vertical swing angle of the cutting boom with a tilt sensor is decided to be the more simple and effective method. The detection sensitivity and the vertical cutting error of a tilt sensor are studied. Vibration tests on an EBZ160 roadheader were performed in a coal mine. The characteristic vibration frequencies are analyzed. A design of a vibration isolation mount for the tilt sensor is presented. It makes the detection device work more reliably under conditions where vibration is present and lays a foundation for the implementation of an automatic roadhead cutter. A tilt sensor is installed on an EBZ160 and an EBZ200, and experiments have been done in a coal mine. The re- suits show that the experimental result is favorable and achieves the goal of automatic control of the vertical swing of the cutting boom.

Reliability of a Novel Cobb Protractor for Measuring the Cobb Angle of Radiograph in Scoliosis

Objective To introduce a novel Cobb protractor and assess its reliability and rapidity for measuring Cobb angle in scoliosis patients. Methods The novel Cobb protractor had two endplate markers. A measurement was performed just to align the two markers to each endplate of the curve. The Cobb angle on the posteroanterior radiographs of 24 patients clinically diagnosed with adolescent idiopathic scoliosis was measured by three orthopedic surgeons with both standard Cobb method and the new technique, and the time of measurement was recorded. Intraclass correlation coefficients(ICCs) were calculated to assess the reliability of the new method. Results The time for a measurement with the new tool was approximately 10 seconds less than the time that used to finish a measurement with the standard method(P<0.05). The overall mean Cobb angle for the major curve of the 24 patients was 47.8°. The mean overall intraobserver and interobserver ICC was 0.971 and 0.971 for the Cobb method group, while the overall intraobserver ICC and the interobserver was 0.985 and 0.979 for the new tool group. Conclusions The novel Cobb protractor could perform quick measurement and measure almost all forms of radiographs. The Cobb protractor might be an ideal instrument to measure the Cobb angle.

Observation and modeling on irregular purple soil water infiltration process

The infiltration process is a critical link between surface water and groundwater. In this research, a specific device to observe infiltration processes in homogeneous and heterogeneous soils with triangular and inverted triangular profiles was designed, and the Green-Ampt model was employed for the process simulation. The results indicate that(1) the wetting front in coarse texture soils transports faster than in fine texture soils;(2) for the homogeneous case, the wetting front in triangularshaped soils transports faster than the inverted triangular type, but the triangular-shaped soils show a lower infiltration rate;(3) in the initial step, the wetting front in triangular-shaped soils shows higher transport speed, but depicts lower speed with increase in the time;(4) both the wetting front and infiltration rate show a significant exponential relation with the time. From these findings, an empirical model was developed which agrees well with the observed data and provides a useful method for this field of soil research.

Joint member angle limits of composite beams and CFT square columns

This work aims to understand the relationship between the member angle limit and the energy ratio for 24 test samples of composite beams and CFT square steel tube columns. This work also compares the formula applicability for member angle limit with the previous test result to provide the basic data for the design of composite beam-CFT column. The evaluation of the member angle limit was performed with concrete compressive strength (fC =22.16 MPa, 30.49 MPa), breadth-to-thickness ratio (B/t=25.0, 33.3, 43.5), and axial capacity ratio (N/N0=0, 0.3, 0.4, 0.5) as the main variables of the test samples. For the relationship between the member angle limit (Ru) and the energy ratio (ES/EC ), the test result shows that the energy ratio becomes lower as the axial capacity ratio and the breadth-to-thickness ratio increase. The energy ratio is lower for the Type B test sample compared with that of Types A and C. For the formula suggested by SATO, the test samples are distributed evenly for comparison between test values and the member angle limit; however, other formulas indicate a deviation. Specifically, for the comparison between R u,cal and R u (Test), Maeda's formula shows severe deviation.

Introducing atmospheric angular momentum into prediction of length of day change by generalized regression neural network model

The general regression neural network(GRNN) model was proposed to model and predict the length of day(LOD) change, which has very complicated time-varying characteristics. Meanwhile, considering that the axial atmospheric angular momentum(AAM) function is tightly correlated with the LOD changes, it was introduced into the GRNN prediction model to further improve the accuracy of prediction. Experiments with the observational data of LOD changes show that the prediction accuracy of the GRNN model is 6.1% higher than that of BP network, and after introducing AAM function, the improvement of prediction accuracy further increases to 14.7%. The results show that the GRNN with AAM function is an effective prediction method for LOD changes.

Evaluation of Skills in Swing Technique in Classical Japanese Swordsmanship in laido Using Sensors

In this study, we analyzed the swing motions of more experienced practitioner and new practitioner of iaido players by using tri-axial acceleration sensor and gyro sensor. Iaido is a modern Japanese martial art/sport. In this way, the acceleration and gyro sensor measurement enabled detailed motion information at the installation points to be displayed in a short time, thus making it possible to easily extract the objective problems. Although it was not possible to confirm by the acceleration and angular velocity measurements the detailed motion of the entire body as obtained in the 2D motion analysis with a high-speed camera, it was confirmed that the acceleration and gyro sensor is an evaluation means that can be installed easily and can provide the exercise information in a short time as an objective index.

MEASUREMENTS OF PARTICLE NUMBER SIZE DISTRIBUTIONS AND NEW PARTICLE FORMATION EVENTS DURING WINTER IN THE PEARL RIVER DELTA REGION,CHINA

Particle number size distribution(PNSD) between 10 nm and 20 μm were measured in the Pearl River Delta(PRD) region in winter 2011.The average particle number concentration of the nucleation mode(10-20 nm),Aitken mode(20-100 nm),accumulation mode(100 nm-1μm) and coarse mode(1-20 μm) particles were 1 552,7 470,4 012,and 19 cm-3,respectively.The volume concentration of accumulation mode particles with peak at 300 nm accounted for over 70% of the total volume concentration.Diurnal variations and dependencies on meteorological parameters of PNSD were investigated.The diurnal variation of nucleation mode particles was mainly influenced by new particle formation events,while the diurnal variation of Aitken mode particles correlated to the traffic emission and the growth process of nucleation mode particles.When the PRD region was controlled by a cold high pressure,conditions of low relative humidity,high wind speed and strong radiation are favorable for the occurrence of new particle formation(NPF) events.The frequency of occurrence of NPF events was 21.3% during the whole measurement period.Parameters describing NPF events,including growth rate(GR) and source rate of condensable vapor(Q),were slightly larger than those in previous literature.This suggests that intense photochemical and biological activities may be the source of condensable vapor for particle growth,even during winter in the PRD.

Tracking of Flat Belts

When applying fiat belts, correct tracking of the belt through the installation has to be assured. Since flat belts are commonly used for conveying and transmission purposes, tracking systems have been well developed, but the ultimate tracking behaviour of the belt can be greatly enhanced by taking special care in the creation of an adequate tracking mechanism. To obtain long-life operation and full value from the equipment, the correct tracking technique plays an important role. This paper deals with two tracking techniques： The skewed and the angled pulley axis. Numerical simulation results are compared with both measurements and an analytical approach. The advantages of numerical simulation compared to experimental tests are ease, convenience and the absence of any safety risk. Compared to analytical approaches the simulation is used for systems for which simple closed form analytic solutions are not possible.

Assesment of Frequency-Magnitude of Extreme Rainfall Events-Case Study of the MeKong River Delta

Extreme rainfall events are primary natural hazards, which cause a severe threat to people and their properties in populated cities, which are normally located in coastal areas in Vietnam. Analysing these events by using a data series observed over years will support us to draw a picture of how the climate change impact on local environments. The purpose of this report is to understand the characteristics of the extreme rainfall events in MEKONG river delta （south VietNam）. Daily rainfall data in the period of 30 years for a meteorological station in each area were collected from the Vietnam National Hydro-meteorological Service. The extreme rainfall events were defined as those exceeding the 95th percentile for each station. The analytical results show that the rainfall values （95th percentile） are 37.4 mm/day at Nam Can station, 27 mm/day at My Thanh station, 22.4 mm/day at Hoa Binh station, 23.8 mm/day at Binh Dai station and 22.7 mm/day at Ben Trai station. The highest rainfall data ever recorded are 246.4 mm/day （Nam Can）, 174.5 mm/day （My Thanh）, 179 mm/day （Hoa Bin_h）, 187.3 mm/day （Binh Dai） and 136.3 mm/day （Ben Trai） during 1983-2012. The result of the Mann-Kendall tests show that there was a significant creasing of the rainfall at Nam Can, My Thanh station in two periods （1983-2012, 1998-2012） while no clear trend of the rainfall was recoreded at Hoa Birth, Binh Dai, Ben Trai station. In order to estimate the return period of the extreme rainfall events, the method General Extreme Value Distribution was used to calculate frequent distribution. The magnitudes of daily maximum rainfall were from 2 to 100 years. The results of return period show that maximum rainfalls are 46.6 mm at Nam Can station （highest） and 31.4 mm at Hoa Birth station （lowest） during 50 years. Similarly, maximum rainfalls are expected to be about 55.1 mm at Nam Can station and 37.2 mm at Hoa Birth station for 100 years.